Battery change

daesdaemar · 01-19-2009, 01:33 PM

Has anyone had to have their PRS-505 battery changed? What were the particulars?

MickeyC · 01-19-2009, 02:39 PM

Fortunately not. I expect you have to send it in to Sony. Have you tried calling Sony tech support?

daesdaemar · 01-19-2009, 04:57 PM

Quote:

Originally Posted by cassidym

Fortunately not. I expect you have to send it in to Sony. Have you tried calling Sony tech support?

I don't need to have it done. I'm curious as to what it involves (and expense).

MickeyC · 01-19-2009, 05:10 PM

Knowing Sony, if it's out of warranty, it won't be cheap

Valloric · 01-19-2009, 07:09 PM

I remember reading a thread here on MobileRead how some guy bought a replacement battery on the net and installed it himself, successfully. For the life of me I can't find it right now...

ProDigit · 01-19-2009, 08:05 PM

The sony uses a pretty regular battery.
it's a 3,7V, 850mAh battery,with 2 leads (a + positive and - ground).

You'll need to open the device (after warranty),by unscrewing the 4 screws in the back,and slide out the internals.

the battery uses a plug that is similar to some notebook cpu fan plugs (2pin,usb).
The only thing you'll need to keep an eye out for is the sizes. Most portable camera's and cellphones have 3,7V and between 640-2500mAh,so finding a good battery online shouldn't be that hard.

Just make sure you connect the leads correct.

Haven't tried myself;but I think the process could involve soldering some wires to have contact between battery and the board.

daesdaemar · 01-20-2009, 08:04 AM

Quote:

Originally Posted by ProDigit

The sony uses a pretty regular battery.
it's a 3,7V, 850mAh battery,with 2 leads (a + positive and - ground).

You'll need to open the device (after warranty),by unscrewing the 4 screws in the back,and slide out the internals.

the battery uses a plug that is similar to some notebook cpu fan plugs (2pin,usb).
The only thing you'll need to keep an eye out for is the sizes. Most portable camera's and cellphones have 3,7V and between 640-2500mAh,so finding a good battery online shouldn't be that hard.

Just make sure you connect the leads correct.

Haven't tried myself;but I think the process could involve soldering some wires to have contact between battery and the board.

Well, if it comes to it at some point in the future, it certainly sounds doable.

lilac_jive · 01-20-2009, 09:13 AM

Quote:

Originally Posted by daesdaemar

Well, if it comes to it at some point in the future, it certainly sounds doable.

I would give them a call and see if they'll give you a quote over the phone or a target price.

PGP_Protector · 01-21-2009, 01:09 PM

Flicker has a set of photos showing how to disassemble it.

http://www.flickr.com/photos/2172951...7603454047408/

daesdaemar · 01-24-2009, 11:55 AM

PGP Protector - thanks. I would NEVER have figured out how to open it otherwise.

Cogito · 03-28-2009, 12:49 PM

I did a battery swap in my 505 today. I was getting only a few days charge and recently, when I didn’t have a charger in my carry-on, had to rely on Sony reps promoting the Reader at the Dallas airport.

I used the flicker pictures and instructions (above)

and a battery (which comes with all the tools you need for the job) from BatteryShip.com

Thoughts:
I used a chopstick on step 6 to gently push out the innards.

You could definitely fit a larger battery (in all dimensions) if you didn’t use the battery tray and just glued the battery onto the back of the screen.

Go slow and don’t force anything. I’ll post if the battery life is unexpected.

Renaldo · 03-29-2009, 09:03 AM

The Sony 505 Service Manual was also posted here:
https://www.mobileread.com/forums/showthread.php?t=26279

It's got full disassembly/assembly instructions.

ProDigit · 03-30-2009, 03:03 PM

I'd advise against gluing anything to the screen; in case you wish to remove it later.

You could however,put some foam around the battery to prevent it making sound when shaking the reader. Also test your battery to see if it charges well.
I would not know if a larger capacity battery would be charged fully on the reader.

astra · 03-30-2009, 03:21 PM

Quote:

Originally Posted by ProDigit

I'd advise against gluing anything to the screen; in case you wish to remove it later.

You could however,put some foam around the battery to prevent it making sound when shaking the reader. Also test your battery to see if it charges well.
I would not know if a larger capacity battery would be charged fully on the reader.

How does the reader know about battery's capacity?
I thought that circuit that is responsible for charging, overcharging/over-discharging of the battery is integrated into the battery. Reader is just aware of what the battery is reporting back?

JSWolf · 03-30-2009, 03:25 PM

Quote:

Originally Posted by Cogito

I did a battery swap in my 505 today. I was getting only a few days charge and recently, when I didn’t have a charger in my carry-on, had to rely on Sony reps promoting the Reader at the Dallas airport.

I used the flicker pictures and instructions (above)

and a battery (which comes with all the tools you need for the job) from BatteryShip.com

Thoughts:
I used a chopstick on step 6 to gently push out the innards.

You could definitely fit a larger battery (in all dimensions) if you didn’t use the battery tray and just glued the battery onto the back of the screen.

Go slow and don’t force anything. I’ll post if the battery life is unexpected.

So is the new battery functioning well?

01-19-2009, 01:33 PM	#1
daesdaemar Addict Posts: 210 Karma: 4282 Join Date: Oct 2008 Location: Florida Device: Sony 505, Kindle 3, iPad 3	Battery change Has anyone had to have their PRS-505 battery changed? What were the particulars?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
O Battery life, battery, wherefore art thou, battery life?	DeusExMe	Amazon Kindle	30	02-21-2012 06:28 PM
PRS 700 - Change battery	Pier	Sony Reader	0	09-04-2010 04:47 AM
PRS 505 Battery Change	two wheels	Sony Reader	3	02-08-2010 04:48 AM
Battery change PRS-505 UK	astra	Sony Reader	11	11-20-2009 04:32 AM
Sony Battery Change	The Skwerl	Sony Reader	1	05-15-2008 10:37 PM

01-19-2009, 02:39 PM	#2
MickeyC Grand Sorcerer Posts: 16,735 Karma: 12185114 Join Date: Nov 2007 Location: Florida Device: iPhone 6 plus, Sony T1, iPad 3	Fortunately not. I expect you have to send it in to Sony. Have you tried calling Sony tech support?

01-19-2009, 05:10 PM	#4
MickeyC Grand Sorcerer Posts: 16,735 Karma: 12185114 Join Date: Nov 2007 Location: Florida Device: iPhone 6 plus, Sony T1, iPad 3	Knowing Sony, if it's out of warranty, it won't be cheap

01-19-2009, 07:09 PM	#5
Valloric Created Sigil, FlightCrew Posts: 1,982 Karma: 350515 Join Date: Feb 2008 Device: Kobo Clara HD	I remember reading a thread here on MobileRead how some guy bought a replacement battery on the net and installed it himself, successfully. For the life of me I can't find it right now...

01-19-2009, 08:05 PM	#6
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	The sony uses a pretty regular battery. it's a 3,7V, 850mAh battery,with 2 leads (a + positive and - ground). You'll need to open the device (after warranty),by unscrewing the 4 screws in the back,and slide out the internals. the battery uses a plug that is similar to some notebook cpu fan plugs (2pin,usb). The only thing you'll need to keep an eye out for is the sizes. Most portable camera's and cellphones have 3,7V and between 640-2500mAh,so finding a good battery online shouldn't be that hard. Just make sure you connect the leads correct. Haven't tried myself;but I think the process could involve soldering some wires to have contact between battery and the board.

01-21-2009, 01:09 PM	#9
PGP_Protector Enthusiast Posts: 44 Karma: 208 Join Date: Jan 2009 Device: PRS-505	Flicker has a set of photos showing how to disassemble it. http://www.flickr.com/photos/2172951...7603454047408/

01-24-2009, 11:55 AM	#10
daesdaemar Addict Posts: 210 Karma: 4282 Join Date: Oct 2008 Location: Florida Device: Sony 505, Kindle 3, iPad 3	PGP Protector - thanks. I would NEVER have figured out how to open it otherwise.

03-28-2009, 12:49 PM	#11
Cogito Reader Posts: 25 Karma: 34 Join Date: Dec 2006 Location: Los Angeles, CA Device: Sony 505, 500	I did a battery swap in my 505 today. I was getting only a few days charge and recently, when I didn’t have a charger in my carry-on, had to rely on Sony reps promoting the Reader at the Dallas airport. I used the flicker pictures and instructions (above) and a battery (which comes with all the tools you need for the job) from BatteryShip.com Thoughts: I used a chopstick on step 6 to gently push out the innards. You could definitely fit a larger battery (in all dimensions) if you didn’t use the battery tray and just glued the battery onto the back of the screen. Go slow and don’t force anything. I’ll post if the battery life is unexpected.

03-29-2009, 09:03 AM	#12
Renaldo Addict Posts: 294 Karma: 250590 Join Date: Feb 2009 Location: The Great Pacific Northwest Device: Kindle 3G + WiFi	The Sony 505 Service Manual was also posted here: https://www.mobileread.com/forums/showthread.php?t=26279 It's got full disassembly/assembly instructions.

03-30-2009, 03:03 PM	#13
ProDigit Karmaniac Posts: 2,553 Karma: 11499146 Join Date: Oct 2008 Location: Miami FL Device: PRS-505, Jetbook, + Mini, +Color, Astak Ez Reader Pro, PPW1, Aura H2O	I'd advise against gluing anything to the screen; in case you wish to remove it later. You could however,put some foam around the battery to prevent it making sound when shaking the reader. Also test your battery to see if it charges well. I would not know if a larger capacity battery would be charged fully on the reader.

Advert

Advert