0.2.1 OI live bug?

sbring · 07-12-2010, 03:50 AM

0.2.1 OI live refuses to start on my Hanlin V3ext. It says internal storage filesystem is damaged. 0.2.0 runs OK though.

lena_punkt · 09-21-2010, 01:39 AM

Same problem here! It just happened yesterday while transferring some files to the device - since then, the device boots up and says "internal file system is damaged", and that I should connect it to the PC and repair/reformat it. But doing so does not help (with Windows and Linux). It happens with 0.2.1 on, even with the daily builds. 0.2 boots up, but does not read my epub files properly...

EDIT: I need to say that I ran some daily builds before, and it worked like a charm...

dottedmag · 09-21-2010, 09:52 AM

Unfortunately there is no user-triggered debugging info gathering yet. Please fall back to older version until it's implemented.

lena_punkt · 09-22-2010, 03:09 PM

I got it working! The trick was to use the actual daily build, "reinstall" version. I first tried the "update" and "flashimage" versions, which did not help.

sbring · 09-24-2010, 02:42 AM

Quote:

Originally Posted by lena_punkt

I got it working! The trick was to use the actual daily build, "reinstall" version. I first tried the "update" and "flashimage" versions, which did not help.

I cannot find these different versions? Can you explain?

lena_punkt · 10-01-2010, 07:17 AM

Take a look over here:
http://openinkpot.org/pub/daily/

I took this version:
http://openinkpot.org/pub/daily/oi-h...-reinstall.zip

sbring · 10-02-2010, 04:07 AM

Quote:

Originally Posted by lena_punkt

Same problem here!

Are you really talking about OI live?

sbring · 10-02-2010, 05:23 AM

Quote:

Originally Posted by sbring

0.2.1 OI live refuses to start on my Hanlin V3ext. It says internal storage filesystem is damaged. 0.2.0 runs OK though.

Same problem with 0.2.2.

dingar · 10-21-2010, 12:16 AM

The same. My device is V3ext

lolica · 04-02-2011, 10:21 AM

I managed to get it working, you can check the IRC logs for today (Apr 02 2011) for how it went down.

You will need to get SSH working.

The 0.3rc1 liveimage is functional. The 0.2.2 image is not. Transfer the contents of both zips to the SD card in separate folders and boot 0.3rc1. Once it is up, SSH in (192.168.111.1 with root/zxc).

Change dir to the 0.2.2 folder (in my case /media/sd/022img). Make a folder in /mnt ('mkdir /mnt/test' for example), then run 'mount /media/sd/022img/openinkpot/rootfs.ext2 /mnt/test' - of course replace with your own directory structure.

Once complete, change dir to /mnt/test/etc
Then run 'vi fstab' and erase the last line, it will look something like this: /dev/mtdblock_STORAGE /mnt/storage vfat quiet,iocharset=utf8,flush,noatime 0 0
If you don't know how to use vi, do yourself a favour and learn =)

Save the file, change dir to /, run 'umount /mnt/test', then run 'reboot', and boot the 0.2.2 image instead.

07-12-2010, 03:50 AM	#1
sbring Member Posts: 18 Karma: 10 Join Date: Mar 2010 Location: Stockholm, Sweden Device: Bebook One	0.2.1 OI live bug? 0.2.1 OI live refuses to start on my Hanlin V3ext. It says internal storage filesystem is damaged. 0.2.0 runs OK though.

09-21-2010, 01:39 AM	#2
lena_punkt Member Posts: 20 Karma: 10 Join Date: Mar 2010 Device: N516 (OpenInkpot)	Same problem here! It just happened yesterday while transferring some files to the device - since then, the device boots up and says "internal file system is damaged", and that I should connect it to the PC and repair/reformat it. But doing so does not help (with Windows and Linux). It happens with 0.2.1 on, even with the daily builds. 0.2 boots up, but does not read my epub files properly... EDIT: I need to say that I ran some daily builds before, and it worked like a charm... Last edited by lena_punkt; 09-21-2010 at 01:52 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where does everyone live?	joycedb	Lounge	81	04-30-2010 10:46 PM
Where You Live	jaxx6166	Lounge	2	02-05-2010 12:48 AM
Live in Hampshire (UK) ??	halfway	Sony Reader	0	12-12-2009 06:30 AM
which one? (I live in Spain)	emcotrina	Which one should I buy?	7	11-02-2009 05:22 AM
PRS-505 bug or eBookLib bug?	porkupan	Sony Reader	3	10-07-2007 10:44 PM

09-21-2010, 09:52 AM	#3
dottedmag OpenInkpot co-founder Posts: 407 Karma: 845 Join Date: Dec 2007 Device: Kindle Oasis	Unfortunately there is no user-triggered debugging info gathering yet. Please fall back to older version until it's implemented.

09-22-2010, 03:09 PM	#4
lena_punkt Member Posts: 20 Karma: 10 Join Date: Mar 2010 Device: N516 (OpenInkpot)	I got it working! The trick was to use the actual daily build, "reinstall" version. I first tried the "update" and "flashimage" versions, which did not help.

10-01-2010, 07:17 AM	#6
lena_punkt Member Posts: 20 Karma: 10 Join Date: Mar 2010 Device: N516 (OpenInkpot)	Take a look over here: http://openinkpot.org/pub/daily/ I took this version: http://openinkpot.org/pub/daily/oi-h...-reinstall.zip

10-21-2010, 12:16 AM	#9
dingar Junior Member Posts: 5 Karma: 10 Join Date: Dec 2009 Device: Hanlin V3	The same. My device is V3ext

04-02-2011, 10:21 AM	#10
lolica Junior Member Posts: 1 Karma: 10 Join Date: Apr 2011 Device: v3ext	I managed to get it working, you can check the IRC logs for today (Apr 02 2011) for how it went down. You will need to get SSH working. The 0.3rc1 liveimage is functional. The 0.2.2 image is not. Transfer the contents of both zips to the SD card in separate folders and boot 0.3rc1. Once it is up, SSH in (192.168.111.1 with root/zxc). Change dir to the 0.2.2 folder (in my case /media/sd/022img). Make a folder in /mnt ('mkdir /mnt/test' for example), then run 'mount /media/sd/022img/openinkpot/rootfs.ext2 /mnt/test' - of course replace with your own directory structure. Once complete, change dir to /mnt/test/etc Then run 'vi fstab' and erase the last line, it will look something like this: /dev/mtdblock_STORAGE /mnt/storage vfat quiet,iocharset=utf8,flush,noatime 0 0 If you don't know how to use vi, do yourself a favour and learn =) Save the file, change dir to /, run 'umount /mnt/test', then run 'reboot', and boot the 0.2.2 image instead.

Advert

Advert