Original REB charger question

Knightshifter · 12-13-2009, 11:28 PM

Hi All,

I am trying to resurrect my reader, which is an original Rocket eBook Reader by nuvomedia.

I have to make my own charger from bits i have, but can anyone confirm the voltage and amps I should be using, please?

I know the REB 1100 uses 12V at 1000 mA, but would mine be the same as this?

Thanks for any info you can give.

--
Knightshifter.

250 Coupe · 12-15-2009, 01:20 PM

You want the equivalent of the Radio Shack 273-358 (old number, 273-1775) 12VDC 1500ma adapter with Adaptaplug A 273-334. Make sure you plug the tip in so the the tip is positive. I mark it with a sharpie so I can see at a glance if it's right. The adapter will set you back $25 or so and the tip is free with purchase.

If you have enough bits and pieces laying around, or are overseas since this one is 120VAC input, you want a regulated 12 volts, at least 1000ma and a O.D. 2.35mm by I.D. 0.7mm center positive tip.

This combo works on Original Rockets, 1100's and 1150's.

Michael

12-13-2009, 11:28 PM	#1
Knightshifter Junior Member Posts: 1 Karma: 10 Join Date: Dec 2009 Device: Rocket eBook Reader	Original REB charger question Hi All, I am trying to resurrect my reader, which is an original Rocket eBook Reader by nuvomedia. I have to make my own charger from bits i have, but can anyone confirm the voltage and amps I should be using, please? I know the REB 1100 uses 12V at 1000 mA, but would mine be the same as this? Thanks for any info you can give. -- Knightshifter.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Ended B&N Nook with "Frame", Light, Charger, and Original Packaging	RPribyl	Flea Market	11	09-21-2010 08:27 PM
Newbie charger question	Ruggles	iRex	1	09-01-2009 08:51 AM
Charger question and Lightwedge	kelly1010	Sony Reader	4	04-09-2009 05:11 PM
question re. reader a.c. charger	br772	Workshop	7	03-24-2009 07:53 PM
Question re AC Charger	Telcoman	Sony Reader	3	02-19-2009 05:43 PM

12-15-2009, 01:20 PM	#2
250 Coupe Groupie Posts: 169 Karma: 10721 Join Date: Jun 2007 Device: Many ebook readers at my house	You want the equivalent of the Radio Shack 273-358 (old number, 273-1775) 12VDC 1500ma adapter with Adaptaplug A 273-334. Make sure you plug the tip in so the the tip is positive. I mark it with a sharpie so I can see at a glance if it's right. The adapter will set you back $25 or so and the tip is free with purchase. If you have enough bits and pieces laying around, or are overseas since this one is 120VAC input, you want a regulated 12 volts, at least 1000ma and a O.D. 2.35mm by I.D. 0.7mm center positive tip. This combo works on Original Rockets, 1100's and 1150's. Michael

Advert