Android Entourage Edge Down After update to 2.2

[vicinc]

or you may need to go for tftp root, see my post, regarding unborking

[dsleg]

Originally Posted by vicinc

it does not find any image, have you tried a different usb mini sd drive

you can till me all steps after piling serial route

[glow]

Just in case, make sure the update file is still on your media. It may get deleted by the installation process?

[dsleg]

Originally Posted by glow

Just in case, make sure the update file is still on your media. It may get deleted by the installation process?

I need someone tell me step by step commands i will using after plugin TTL serial and add MMS card with update.zip
EdgeJr>> (whats next step please )

[dsleg]

Originally Posted by dsleg

I need someone tell me step by step commands i will using after plugin TTL serial and add MMS card with update.zip
EdgeJr>> (whats next step please )

:h elp::hel p:

[dsleg]

U-Boot 2009.01-rc1-svn1084 (Feb 15 2011 - 12:04:39)
Marvell version: 1.1.1.1 PXAxxx

ESI version: 2.0.3 (1) <<EdgeJr>>

MARVELL PXAXXX series.
Based on 88SV331xV5 Core with ARM926 LE CPU.
Code original base is u-boot-arm 2009.01-rc1.

DRAM: 512 MB
NAND: detect chip id d7ec on cs 0, Samsung 32Gibx8
SPI NOR: SF: Got idcode c2 20 17 c2 20
SF: Detected MX25L6405D with page size 256, total 8388608 bytes
In: serial
Out: serial
Err: serial
i2c_rx_full timeout
Net: u2o-eth
Hit any key to stop autoboot: 0
EdgeJr>> run boot_user

NAND read: device 0 offset 0x1300000, size 0x1800000
Detected legacy BBM
Max capacity of BBM is 162 blocks!!
relocation table at page:127
The reloc table is empty now
25165824 bytes read: OK
read zImage from SPI NOR (sf read 0x500000 0x100000 0x300000)
Ready to boot zImage from 500000


Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.34 (buildmaster@zeke) (gcc version 4.4.0 (GCC)
) #1 PREEMPT Tue Mar 29 09:44:53 EDT 2011
[ 0.000000] CPU: Marvell Mohawk [56158400] revision 0 (ARMv5TE), cr=04053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: PXA168 Edge Development Platform
[ 0.000000] pxa cmdlinexa cmdline:
[ 0.000000] bootloader: ( jb @ jb ) Feb 15 2011 12:04:39
[ 0.000000] board: edgejr
[ 0.000000] chip id: 0xb0a168
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pag
es: 130048
[ 0.000000] Kernel command line: mem=512M console=ttyS1,115200 flipped=0 init
rd=0x01000000,24M ramdisk_size=24576 root=/dev/ram0 ip=192.168.2.101:192.168.2.1
00::255.255.255.0::usb0n mmode=1 esi_cmd=--maint_user=cmd5
[ 0.000000] flipped = 0
[ 0.000000] mmode = 1
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 488284k/488284k available, 36004k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
[ 0.000000] vmalloc : 0xe0800000 - 0xfe000000 ( 472 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc00e8000 ( 896 kB)
[ 0.000000] .text : 0xc00e8000 - 0xc05d1000 (5028 kB)
[ 0.000000] .data : 0xc05f4000 - 0xc0632de0 ( 252 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:256
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
[ 0.000205] Calibrating delay loop... 796.26 BogoMIPS (lpj=3981312)
[ 0.220494] Mount-cache hash table entries: 512
[ 0.220824] CPU: Testing write buffer coherency: ok
[ 0.223950] Mohawk L2 cache enabled.
[ 0.224897] NET: Registered protocol family 16
[ 0.226420] pxa168_mfp_set_fastio_drive config changed to 2000
[ 0.226883] @edge_add_nand Get mlc size from CMDLINE:1
[ 0.329149] gpio 78 direction set to OUTPUT
[ 0.329167] gpio 80 direction set to OUTPUT
[ 0.330001] platform_driver_register
[ 0.354570] bio: create slab <bio-0> at 0
[ 0.356032] SCSI subsystem initialized
[ 0.356408] usbcore: registered new interface driver usbfs
[ 0.356732] usbcore: registered new interface driver hub
[ 0.356965] usbcore: registered new device driver usb
[ 0.358701] I2C: i2c-0: PXA I2C adapter
[ 0.361246] warning: i2c: <pxa_i2c-i2c.1> slave_0x20 exhausted retries
[ 0.361275] pcf857x: probe of 1-0020 failed with error -121
[ 0.361296] I2C: i2c-1: PXA I2C adapter
[ 0.362446] Advanced Linux Sound Architecture Driver Version 1.0.22.1.
[ 0.363029] Bluetooth: Core ver 2.15
[ 0.363292] NET: Registered protocol family 31
[ 0.363306] Bluetooth: HCI device and connection manager initialized
[ 0.363322] Bluetooth: HCI socket layer initialized
[ 0.363658] Switching to clocksource clocksource
[ 0.365518] NET: Registered protocol family 2
[ 0.365657] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.366004] TCP established hash table entries: 16384 (order: 5, 131072 bytes
)
[ 0.366314] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.366454] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.366470] TCP reno registered
[ 0.366486] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.366513] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.366674] NET: Registered protocol family 1
[ 0.366987] RPC: Registered udp transport module.
[ 0.367003] RPC: Registered tcp transport module.
[ 0.367016] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.367220] Trying to unpack rootfs image as initramfs...
[ 0.368075] rootfs image is not initramfs (no cpio magic); looks like an init
rd
[ 0.481557] Freeing initrd memory: 24576K
[ 0.482241] No pmic_ops registered!
[ 0.482271] Current Operating Point is 4
[ 0.483019] Initialize PXA910 MSPM
[ 0.483041] NetWinder Floating Point Emulator V0.97 (double precision)
[ 0.489986] ashmem: initialized
[ 0.491154] NTFS driver 2.1.29 [Flags: R/O].
[ 0.491345] fuse init (API version 7.13)
[ 0.491681] msgmni has been set to 1001
[ 0.494599] alg: No test for stdrng (krng)
[ 0.494672] io scheduler noop registered
[ 0.494686] io scheduler deadline registered
[ 0.494797] io scheduler cfq registered (default)
[ 0.495691] pxa168fb_probe: NUM_CLK_DIVS = 4
[ 0.527695] Console: switching to colour frame buffer device 100x30
[ 0.541466] pxa168fb: frame buffer device was loaded to /dev/fb0 <Base>.
[ 0.554939] pxa2xx-uart.1: ttyS1 at MMIO 0xd4018000 (irq = 28) is a BTUART
[ 1.016119] console [ttyS1] enabled
[ 1.020377] pxa2xx-uart.2: ttyS2 at MMIO 0xd4026000 (irq = 29) is a STUART
[ 1.035968] brd: module loaded
[ 1.043225] loop: module loaded
[ 1.046587] pmem: 0 init
[ 1.050059] pmem_adsp: 0 init
[ 1.063801] Detect a flash id d7ec, cs 0
[ 1.067728] Shows real timing(ns):
[ 1.071125] NDTR0 SELCNTR is set
[ 1.074432] No Read Stobe delay
[ 1.077575] Controller is using falling edge to detect RE
[ 1.082974] NDTR1 wait mode is set
[ 1.086407] TADL is 160 TCH is 19 TCS is 25 TWH is 19 TWP is 19 TRH is 19 TRP
is 19 TR is 153 TRHW is 102 TWHR is 64 TAR is 76
[ 1.129304] Max capacity of BBM is 162 blocks!!
[ 1.133877] relocation table at page:127
[ 1.137800] The reloc table is empty now
[ 1.141725] Creating 8 MTD partitions on "pxa3xx_nand-0":
[ 1.147157] 0x000000000000-0x000000a00000 : "BBM_reserve1"
[ 1.153771] 0x000000a00000-0x000000b00000 : "bootloader-alt"
[ 1.160239] 0x000000b00000-0x000000c00000 : "environment-alt"
[ 1.166865] 0x000000c00000-0x000000f00000 : "kernel-alt"
[ 1.172973] 0x000000f00000-0x000001200000 : "kernelrecovery-alt"
[ 1.179886] 0x000001200000-0x000004000000 : "maintenance"
[ 1.186208] 0x000004000000-0x0000faf00000 : "Android"
[ 1.193459] 0x0000faf00000-0x000100000000 : "MRVL_BBM"
[ 1.201063] There is no nand chip on cs 1!
[ 1.206545] m25p80 spi2.0: found mx25l6405d, expected mx25l64
[ 1.212302] m25p80 spi2.0: mx25l6405d (8192 Kbytes)
[ 1.217261] set mmode on partition[0] = bootloader
[ 1.222056] Creating 5 MTD partitions on "pxa2xx_spi_nor":
[ 1.227575] 0x000000000000-0x000000040000 : "bootloader"
[ 1.233969] 0x000000040000-0x0000000c0000 : "bootcode"
[ 1.240045] 0x0000000c0000-0x000000100000 : "environment"
[ 1.246448] 0x000000100000-0x000000400000 : "kernel"
[ 1.252343] 0x000000400000-0x000000800000 : "kernelrecovery"
[ 1.259128] PPP generic driver version 2.4.2
[ 1.263868] PPP Deflate Compression module registered
[ 1.268922] PPP BSD Compression module registered
[ 1.274588] PPP MPPE Compression module registered
[ 1.279383] NET: Registered protocol family 24
[ 1.283887] tun: Universal TUN/TAP device driver, 1.6
[ 1.288938] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.295596] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr
iver
[ 1.303283] usbcore: registered new interface driver pegasus
[ 1.309022] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[ 1.316087] usbcore: registered new interface driver rtl8150
[ 1.321752] hso: drivers/net/usb/hso.c: 1.2 Option Wireless
[ 1.327605] usbcore: registered new interface driver hso
[ 1.333067] usbcore: registered new interface driver MOSCHIP usb-ethernet dri
ver
[ 1.340951] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.347671] u2h regbase 0xe088e000 phybase 0xe0892000 irq 51
[ 1.355270] pxau2h-ehci pxau2h-ehci: Marvell PXA SOC EHCI Host Controller
[ 1.362452] pxau2h-ehci pxau2h-ehci: new USB bus registered, assigned bus num
ber 1
[ 1.370218] pxau2h-ehci pxau2h-ehci: irq 51, io base 0x2088e000
[ 1.393729] pxau2h-ehci pxau2h-ehci: USB 2.0 started, EHCI 1.00
[ 1.400384] hub 1-0:1.0: USB hub found
[ 1.404205] hub 1-0:1.0: 1 port detected
[ 1.408692] Initializing USB Mass Storage driver...
[ 1.413919] usbcore: registered new interface driver usb-storage
[ 1.419926] USB Mass Storage support registered.
[ 1.424960] usbcore: registered new interface driver usbserial
[ 1.430969] USB Serial support registered for generic
[ 1.436237] usbcore: registered new interface driver usbserial_generic
[ 1.442765] usbserial: USB Serial Driver core
[ 1.447356] USB Serial support registered for GSM modem (1-port)
[ 1.453550] usbcore: registered new interface driver option
[ 1.459161] option: v0.7.2:USB Driver for GSM modems
[ 1.464343] USB Serial support registered for Sierra USB modem
[ 1.470342] usbcore: registered new interface driver sierra
[ 1.475966] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[ 1.482663] u2o regbase 0xe0896000 phybase 0xe089a000 irq 44
[ 1.489671] android init
[ 1.492269] android_probe pdata: c05fb8d4
[ 1.497331] android_bind
[ 1.500201] android_usb gadget: android_usb ready
[ 1.504983] IRQ 44/pxa-u2o: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1.511879] IRQ 44/vbus: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1.518780] f_adb init
[ 1.521142] android_register_function adb
[ 1.525211] f_mass_storage init
[ 1.528403] fsg_probe pdev: c05fb2c0, pdata: c05fb8f8
[ 1.533591] android_register_function usb_mass_storage
[ 1.538964] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 1.545889] android_usb gadget: Number of LUNs=2
[ 1.550510] lun0: LUN: removable file: (no medium)
[ 1.555415] lun1: LUN: removable file: (no medium)
[ 1.560482] adb_bind_config
[ 1.564165] mice: PS/2 mouse device common for all mice
[ 1.569688] gpio-keys gpio-keys: failed to request GPIO 131, error -22
[ 1.576296] gpio-keys: probe of gpio-keys failed with error -22
[ 1.582398] [esikbd_init] entered
[ 1.585990] [esikbd_probe] entered
[ 1.589408] [esikbd_probe] registering esi-keys
[ 1.594344] input: ESI Virtual Keyboard as /class/input/input0
[ 1.600417] [esikbd_probe] finished successfully
[ 1.605092] [esikbd_init] left
[ 1.608677] input: pxa27x-keypad as /class/input/input1
[ 1.614557] ofm : I2C device probe
[ 1.718836] input: ofm as /class/input/input2
[ 1.725552] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.732083] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 1.740432] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.798820] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.805381] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 1.813763] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.872245] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.878801] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 1.887125] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.945501] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 1.952028] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 1.960351] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.018759] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.025334] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.033774] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.046945] android_usb gadget: high speed config #1: android
[ 2.098116] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.104677] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.113010] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.171494] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.178053] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.186373] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.192910] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.199528] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.206849] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.213469] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.220813] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.227427] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 2.284653] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.291185] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.299511] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.357888] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.364441] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.372738] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.431209] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.437766] ofm : ERROR i2c send!!!index(5) data(28) return (ffffff87)
[ 2.446086] warning: i2c: <pxa_i2c-i2c.0> slave_0x53 exhausted retries
[ 2.502680] ofm_i2c_init: failed initing OFM (0x05 = 0xffffff87, 10 tries)
[ 2.509749] usb 1-1: new high speed USB device using pxau2h-ehci and address
2
[ 2.518174] error: I2C device probe (0)
[ 2.522257] ofm : I2C device init Success
[ 2.527238] input: tsc2007 as /class/input/input3
[ 2.533908] input: power-button as /class/input/input4
[ 2.539361] power button probe finished
[ 2.547972] using rtc device, ds1337, for alarms
[ 2.552452] rtc-ds1307 0-0068: rtc core: registered ds1337 as rtc0
[ 2.559499] hub 1-1:1.0: USB hub found
[ 2.563402] hub 1-1:1.0: 4 ports detected
[ 2.567610] Linux video capture interface: v2.00
[ 2.572815] ccic_ctlr_power_up: ccic is power up!!!
[ 2.596704] avengers_lite_ac_read_status: read fail (-14)
[ 2.603034] power_mcu_init
[ 2.606585] power_mcu: probe reports mcu version: 30
[ 2.612066] Bluetooth: Virtual HCI driver ver 1.3
[ 2.617252] Bluetooth: HCI UART driver ver 2.2
[ 2.621724] Bluetooth: HCI H4 protocol initialized
[ 2.626575] android_usb gadget: high speed config #1: android
[ 2.632371] Bluetooth: HCI BCSP protocol initialized
[ 2.637381] Bluetooth: HCILL protocol initialized
[ 2.643560] mmc0: SDHCI controller on MMC [pxa-sdh.1] using DMA
[ 2.650717] mmc1: SDHCI controller on MMC [pxa-sdh.3] using DMA
[ 2.656871] pxa-sdh: Secure Digital Host Controller Interface driver
[ 2.663235] pxa-sdh: Copyright(c) Pierre Ossman
[ 2.671666] usbcore: registered new interface driver usbhid
[ 2.677308] usbhid: USB HID core driver
[ 2.681737] logger: created 64K log 'log_main'
[ 2.730675] logger: created 256K log 'log_events'
[ 2.735756] logger: created 64K log 'log_radio'
[ 2.740662] logger: created 64K log 'log_system'
[ 2.746337] No device for DAI pxa3xx-ssp1
[ 2.750349] No device for DAI pxa3xx-ssp2
[ 2.754456] No device for DAI pxa3xx-ssp3
[ 2.758465] No device for DAI pxa3xx-ssp4
[ 2.762475] No device for DAI Grayback-ssp
[ 2.812589] asoc: WM8978 HiFi <-> pxa3xx-ssp1 mapping ok
[ 2.899502] ALSA device list:
[ 2.902482] #0: ASPENITE WM8978 (WM8978)
[ 2.906897] TCP cubic registered
[ 2.910126] NET: Registered protocol family 17
[ 2.914635] NET: Registered protocol family 15
[ 2.919097] Bluetooth: L2CAP ver 2.14
[ 2.922752] Bluetooth: L2CAP socket layer initialized
[ 2.927844] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.932370] Bluetooth: SCO socket layer initialized
[ 2.937417] Bluetooth: RFCOMM TTY layer initialized
[ 2.942308] Bluetooth: RFCOMM socket layer initialized
[ 2.947501] Bluetooth: RFCOMM ver 1.11
[ 2.951253] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.956591] Bluetooth: BNEP filters: protocol multicast
[ 2.961816] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.014268] XScale iWMMXt coprocessor detected.
[ 3.026744] pxa168fb_ovly: frame buffer device was loaded to /dev/fb1 <Ovly>.

[ 3.123857] rtc-ds1307 0-0068: setting system clock to 2000-01-01 10:46:01 UT
C (946723561)
[ 3.176115] OmniVision ov3640 sensor driver, at your service
[ 3.270060] ov3640 power on (reset active)
[ 3.318196] ov3640 power on (reset inactive)
[ 3.324403] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.332699] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.341027] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.349350] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.357674] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.366005] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.374331] warning: i2c: <pxa_i2c-i2c.0> slave_0x3c exhausted retries
[ 3.472210] OmniVision ov7740 sensor driver, at your service
[ 4.238481] mmc0: new SD card at address 1234
[ 4.243277] mmcblk0: mmc0:1234 SA02G 1.83 GiB
[ 4.247960] mmcblk0: p1
[ 7.268520] mmc1: new high speed SDIO card at address 0001
[ 16.173958] RAMDISK: gzip image found at block 0
[ 17.243451] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 17.249534] Freeing init memory: 896K
init started: BusyBox v1.9.1 (2008-07-01 17:19:53 IST)
starting pid 649, tty '': '/etc/init.d/rcS'

System initialization...

Hostname : ESIedge
Filesystem : v1.0.0

Kernel release : Linux 2.6.34
Kernel version : #1 PREEMPT Tue Mar 29 09:44:53 EDT 2011

Mounting /proc : [SUCCESS]
Mounting /sys : [SUCCESS]
Mounting /dev : [SUCCESS]
Mounting /dev/pts : [SUCCESS]
Enabling hot-plug : [SUCCESS]
Populating /dev : [SUCCESS]
Mounting other filesystems : [SUCCESS]
Starting syslogd : Jan 1 10:46:16 ESIedge syslog.info syslogd starte
d: BusyBox v1.9.1
[SUCCESS]
Starting telnetd : [SUCCESS]

System initialization complete.
Archive: /usr/esi/images.zip
inflating: /tmp/img-splash-flip.raw
inflating: /tmp/img-splash.raw
inflating: /tmp/migrate-1.raw
inflating: /tmp/migrate-2.raw
inflating: /tmp/migrate-3.raw
inflating: /tmp/migrate-4.raw
inflating: /tmp/migrate-flip-1.raw
inflating: /tmp/migrate-flip-2.raw
inflating: /tmp/migrate-flip-3.raw
inflating: /tmp/migrate-flip-4.raw

show splash screen...

starting adbd...

starting boot command handler...
[ 18.336377] enabling adb
[ 18.353785] UBI: attaching mtd6 to ubi0
[ 18.357645] UBI: physical eraseblock size: 524288 bytes (512 KiB)
[ 18.364206] adb_open
[ 18.366862] UBI: logical eraseblock size: 516096 bytes
[ 18.372266] UBI: smallest flash I/O unit: 4096
[ 18.377025] UBI: VID header offset: 4096 (aligned 4096)
[ 18.383037] UBI: data offset: 8192
[ 19.053416] android_usb gadget: high speed config #1: android
[ 23.480131] UBI: attached mtd6 to ubi0
[ 23.483973] UBI: MTD device name: "Android"
[ 23.489116] UBI: MTD device size: 3951 MiB
[ 23.495481] UBI: number of good PEBs: 7902
[ 23.500193] UBI: number of bad PEBs: 0
[ 23.504691] UBI: max. allowed volumes: 128
[ 23.509308] UBI: wear-leveling threshold: 256
[ 23.513952] UBI: number of internal volumes: 1
[ 23.518396] UBI: number of user volumes: 4
[ 23.522841] UBI: available PEBs: 38
[ 23.527450] UBI: total number of reserved PEBs: 7864
[ 23.532415] UBI: number of PEBs reserved for bad PEB handling: 79
[ 23.538551] UBI: max/mean erase counter: 1/0
[ 23.542823] UBI: image sequence number: 670028476
[ 23.547568] UBI: background thread "ubi_bgt0d" started, PID 703
UBI device number 0, total 7902 LEBs (4078190592 bytes, 3.8 GiB), available 38 L
EBs (19611648 bytes, 18.7 MiB), LEB size 516096 bytes (504.0 KiB)
/etc/init.d/edge_start: handling user command (--maint_user=cmd5)...
/etc/init.d/edge_user: searching for update.zip on /dev/sda1 : device not found
/etc/init.d/edge_user: searching for update.zip on /dev/sda : device not found
/etc/init.d/edge_user: searching for update.zip on /dev/mmcblk0p1 : update file
found
executing update command (user update on /dev/mmcblk0p1)...
opening update file...
update.zip exists on /dev/mmcblk0p1
verifying update.zip...
Archive: /sdcard/update.zip
testing: boot.zip OK
testing: data.zip OK
testing: root.zip OK
testing: system1.zip OK
testing: system2.zip OK
testing: tools.zip OK
testing: update.sh OK
No errors detected in compressed data of /sdcard/update.zip.
verification OK, continue...
extracting update script...
executing update.sh user /dev/mmcblk0p1
fn=update.zip, dev=/dev/mmcblk0p1, fs=auto
start: Sat Jan 1 10:47:22 UTC 2000 (user)
executing update script...
update.zip exists on /dev/mmcblk0p1
unpacking tools in /tmp...
show progress...
[ 84.928265] UBIFS: mounted UBI device 0, volume 0, name "system"
[ 84.934344] UBIFS: file system size: 362815488 bytes (354312 KiB, 346 MiB,
703 LEBs)
[ 84.942272] UBIFS: journal size: 18063360 bytes (17640 KiB, 17 MiB, 35
LEBs)
[ 84.949869] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 84.955725] UBIFS: default compressor: lzo
[ 84.959822] UBIFS: reserved for root: 4952683 bytes (4836 KiB)
[ 85.028313] UBIFS: un-mount UBI device 0, volume 0
UPDATE_DEVICE = edge
TARGET_DEVICE = edgejr
BUILD_TYPE = user
************************************************** *******************
current: edgejr-user 0.9 ERMINE 1353 release-keys
new: edge-user 0.9 ERMINE 1353 release-keys
MISMATCH: aborting update
************************************************** *******************
rm: cannot remove '/srcmnt/recovery/command': No such file or directory
starting pid 751, tty '': '/bin/umount'
umount: none busy - remounted read-only
umount: mdev busy - remounted read-only
starting pid 753, tty '': '/sbin/swapoff'
The system is going down NOW!
Sending SIGTERM to all processe[ 85.793336] disabling adb
s
Jan 1 10:47:24 ESIedge syslog.info syslogd exiting
[ 85.813554] adb_release
Sending SIGKILL to all processes
[ 86.794280] android_usb gadget: high speed config #1: android
[ 86.914994] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 86.921616] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 86.928897] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 86.935512] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 86.942769] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 86.949384] android_usb gadget: common->fsg is NULL in fsg_setup at 606
[ 87.356022] android_usb gadget: high speed config #1: android
[ 87.763271] android_usb gadget: high speed config #1: android
Requesting system reboot
[ 88.151017] android_usb gadget: high speed config #1: android
[ 89.903844] mv_usb_gadget_shutdown
[ 89.903855]
[ 89.908739] Restarting system.


U-Boot 2009.01-rc1-svn1084 (Feb 15 2011 - 12:04:39)
Marvell version: 1.1.1.1 PXAxxx

ESI version: 2.0.3 (1) <<EdgeJr>>

MARVELL PXAXXX series.
Based on 88SV331xV5 Core with ARM926 LE CPU.
Code original base is u-boot-arm 2009.01-rc1.

DRAM: 512 MB
NAND: detect chip id d7ec on cs 0, Samsung 32Gibx8
SPI NOR: SF: Got idcode c2 20 17 c2 20
SF: Detected MX25L6405D with page size 256, total 8388608 bytes
In: serial
Out: serial
Err: serial
i2c_rx_full timeout
Net: u2o-eth
Hit any key to stop autoboot: 0
EdgeJr>>

[rixeta]

i had the same problem.... did u fix yours???... i fixed mine

ill be glad to help

[eemad]

Originally Posted by rixeta

i had the same problem.... did u fix yours???... i fixed mine

ill be glad to help

please help me i also used pe update for ee,and now my ee won't turn off have to take the battery off if switch off.not waking up neither. please me step by step.

[Gunnerp245]

Originally Posted by eemad

please help me i also used pe update for ee,and now...

Search for another thread here where a member made the same mistake; I believe the only fix is to use the serial cable option.

[dsleg]

my entourage edge back to work thanks for everyone helped me and i will post all steps

[Filark]

Yahoo!!

Very good news, dsleg!