10-27-2020, 06:34 PM | #1 |
rm -rf /
Posts: 219
Karma: 3333683
Join Date: Nov 2019
Location: United Kingdom
Device: K5, KT, KT2, KT3, KT4, KV, PW2, PW3, PW4, PW5
|
Entering USB HID/Serial Download mode on KT2
After reviewing the iMX6SL reference manual + datasheets and the PW3 PCB photos provided by @bdm310 within this thread, I was able to establish that the boot control pins needed to enter USB Serial Download mode are broken out to test pads on the back of the PW3 PCB at these locations:
Both of the pads listed above are also present on the KT2 and I was able to enter USB Serial Download on this device by pulling TM401 up to 3.3v. The KT2 appears with the product name "SE Blank MEGREZ" and VID:PID 15a2:0063, and a u-boot image can be loaded using imx_usb_loader with this config: Code:
KindleTouch2 #hid/bulk,[old_header,]max packet size, dcd_addr, {ram start, ram size}(repeat valid ram areas) hid,1024,0x910000,0x70000000,256M,0xF8000000,128K Last edited by katadelos; 10-27-2020 at 09:45 PM. Reason: Fixed name + link, added pad location image |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[PW1] stuck on U-boot / USB Download Mode / unbrick attempt | chefchens | Kindle Developer's Corner | 16 | 02-24-2019 02:54 AM |
Can't enter USB download mode | rea5245 | Kindle Developer's Corner | 1 | 10-09-2015 09:35 PM |
k3flasher, a USB download mode utility | hawhill | Kindle Developer's Corner | 222 | 01-09-2014 07:55 AM |
Re-entering USB drive mode? | Rod Whiteley | Kindle Developer's Corner | 16 | 05-30-2012 01:42 PM |
[Kindle Touch] Boot over USB HID serial / "USB downloader" mode | eureka | Kindle Developer's Corner | 16 | 02-25-2012 10:21 PM |