08-31-2010, 05:40 PM | #1 |
Edge User
|
Dingo 1.0 – Problems Updating
This question always gets asked, so while I download my own update, let me post this, 'cause I know people are going to ask
In every past release, many people have had problems updating, mainly because Android doesn’t do a great job telling the user what’s happening (this isn’t enTourage’s fault, but enTourage has been able to “assist Android to make things a bit more informative). Problem 1: “I installed the update, but nothing happens The key thing to understand is that the update is a two part process. Part 1 is to download the update. Part 2 is to install the update. So, here’s what you do: - in the Applications, tap the “Update application and instruct it to download the update - as the update downloads, at the top left corner of the LCD you’ll see an indicator, with a number in red superimposed, going from 0 to 100 (percent) - the download will take 5-10 minutes at least - when the download is done, you’ll see a different indicator in the top left corner of the LCD, with no red numbers - press the “Menu button, “notifications, and then tap the “Update ready to install item - Follow the instructions to install the update. It’ll take about 5 minutes or a bit more. When it installs, the eDGe will reboot. If, when it reboots, your eDGe still looks the same, then it could be the update didn’t “take. In this case, repeat the update process. And repeat it a third time if necessary. After that, contact enTourage Tech Support so they can assist you immediately. It’s a computer after all, and stuff happens from time to time Problem 2: “My eDGe keeps installing and rebooting by itself in an infinite loop If you previously got an “update.zip via email (or otherwise) from enTourage, or downloaded it from a link provided in these forums, then it’s probably the cause. The eDGe is being confused by having two update.zip’s (the one the “Update app downloads, and the leftover one from last time). First, power off your eDGe, pulling the battery if necessary. Then remove the SD card and then boot up again. If the patch doesn’t install, but the eDGe goes to the home screen fine, try redownloading the update and try again. If removing the SD card doesn’t help, contact enTourage Tech Support immediately so that they can help you right away. Hope this is helpful |
09-01-2010, 05:38 AM | #2 |
Edge User
|
well I had problem two, I removed the SD card, and now my edge is hanging on startup. this is a problem I have had before, and had to run the golden update, looks like I lose al my work...again.
|
Advert | |
|
09-01-2010, 09:00 AM | #3 |
Edge User
|
Was your Library on the SD card?
In any case, Tech Support should be able to help you out, perhaps even save your work. |
09-01-2010, 06:32 PM | #4 |
Edge User
|
luckily I ran a library backup a few days ago [gee was I relieved when I realised that], so only my most recent work was lost.
After much frustration trying to get my wifi set up again (for some reason it didnt want to accept the login details or save them), I finally re downloaded dingo, deleted the golden update file from the sd card, and ran the update. I did give tech support a shout by writing a follow up in my previous ticket. |
11-14-2010, 10:58 AM | #5 | |
Edge User
|
Quote:
The only way I can access "Update now" is from Settings > eDGe Settings and it just says that there are no updates, although the ROM versions tells a different tale. Ideas are much welcome. |
|
Advert | |
|
11-14-2010, 12:12 PM | #6 |
Edge User
|
Current Software Version:
1.6.eng.buildmaster.20100413.101908.4 Is this the latest update? |
11-14-2010, 01:26 PM | #7 |
Edge User
|
I probably missed this, but do you have the Pocket eDGe or the full-sized version?
|
11-14-2010, 01:46 PM | #8 |
Edge User
|
Full sized EE.
|
11-14-2010, 02:02 PM | #9 |
Edge User
|
What does it say under Settings>About eDGe>Build number? If it says "DINGO-1.6", you have the most up-to-date version.
|
11-14-2010, 06:48 PM | #10 |
Edge User
|
BTW, enTourage Support lists the following article for how to Update your Pocket eDGe: https://www.entourageedge.com/suppor...barticleid=207.
Note that one user reported that Tech Support had turned off updates for the Pocket eDGe temporarily, so this might be why you're not getting updates. |
11-14-2010, 09:31 PM | #11 |
Edge User
|
Boris, I think nzimas said they had a full-sized EE. Did enTourage shut off updates for it as well?
|
11-14-2010, 09:40 PM | #12 |
Edge User
|
Right you are No, enTourage didn't disable updates for the full-sized EE as far as I know.
The "Current Software Version" that nzimas posted suggests a version 1.6, but that might be the version of the Android OS (1.6). My "Kernel Version" under Settings -About eDGe shows "2.6.29buildmaster@zeke #1". @nzimas: can you post what "Build number" says under Settings - About eDGe? |
11-14-2010, 10:02 PM | #13 |
Edge User
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
dingo | guyjack | enTourage Archive | 160 | 09-01-2010 10:32 AM |
Problems updating to 0.6.30 | kojak666 | Calibre | 4 | 12-27-2009 07:13 PM |
Firmware Update Problems Updating to Newest Firmware | Dr. Wily | Amazon Kindle | 12 | 12-04-2009 06:10 PM |
Problems updating Firmware | Janelle | HanLin eBook | 7 | 08-10-2009 10:08 AM |
Problems after updating connect software | Zevs | Sony Reader | 16 | 10-28-2007 06:14 PM |