02-17-2013, 11:34 AM | #16 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
They load into 5.3.3 (K5 Paperwhite) not just into 5.3.2 (K5 touch) and should load into any kernel with the same version string. And perhaps earlier kernels using "force" but that is a bit risky. Code:
core2quad netfilter $ modinfo ./ipt_LOG.ko filename: ./ipt_LOG.ko description: Xtables: IPv4 packet logging to syslog author: Netfilter Core Team <coreteam@netfilter.org> license: GPL depends: vermagic: 2.6.31-rt11-lab126 mod_unload ARMv7 Code:
[root@kindle root]# lsmod Module Size Used by g_ether 27500 0 arcotg_udc_yoshime 17472 1 g_ether pkt_monitor 3532 0 cyttsp 25692 0 fuse 59316 2 mxc_epdc_fb 42504 3 eink_fb_waveform 557596 1 mxc_epdc_fb [root@kindle root]# insmod ./ipt_REJECT.ko [root@kindle root]# lsmod Module Size Used by ipt_REJECT 2792 0 g_ether 27500 0 arcotg_udc_yoshime 17472 1 g_ether pkt_monitor 3532 0 cyttsp 25692 0 fuse 59316 2 mxc_epdc_fb 42504 3 eink_fb_waveform 557596 1 mxc_epdc_fb [root@kindle root]# cat /proc/version Linux version 2.6.31-rt11-lab126 (jenkins-official@jbuild03) (collect2: ld returned 1 exit status) #1 Tue Jan 8 22:06:21 PST 2013 That will let me start testing BBB-1.1.0 rule-set (on the K5s) with a proper "REJECT" target and BBB-1.1.x rule-set (developer packet capture). @baf : You didn't happen to build the ulogd daemon did you? Last edited by knc1; 02-17-2013 at 11:42 AM. |
|
02-17-2013, 11:36 AM | #17 | ||
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
[root@kindle root]# cat /proc/version
Quote:
Quote:
|
||
Advert | |
|
02-17-2013, 11:43 AM | #18 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Is jbuild01 on the K4?
|
02-17-2013, 12:42 PM | #19 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
"Not Sure". will happily test should my grubby mits ever own one
|
02-17-2013, 04:33 PM | #20 |
Evangelist
Posts: 404
Karma: 2200000
Join Date: May 2012
Device: kt
|
You will find this package at the bottom of my xterm page. I have never used it before and now just played a bit. I included working config (with adjusted paths etc) in the package to start with.
Last edited by baf; 02-17-2013 at 04:38 PM. |
Advert | |
|
02-17-2013, 04:45 PM | #21 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
That is the new v-2 ULOGD - Not sure if the old v-1 flavor wouldn't do the job of just copying packets without all the extra bells and whistles. Will play with both to get a better idea. |
|
02-17-2013, 05:06 PM | #22 |
Evangelist
Posts: 404
Karma: 2200000
Join Date: May 2012
Device: kt
|
|
02-17-2013, 06:41 PM | #23 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
I used to feed PSAD with ULOG target, back when I was on that project.
Now I want the entire packet to add specific rules for using parts of the Amazon network services while blocking others. I.E: For the 'developer rule-set'. For other uses, the LOG target is probably enough, will just have to do something about the place that syslog-ng is writing to (and where its configure file is at). A neat challenge, what with the KUAL objective of never touching system image files. Will probably end up with over-mounting that file or directory with something, maybe a tmpfs something. (then everything goes away on re-boot) Last edited by knc1; 02-17-2013 at 06:44 PM. |
02-24-2013, 02:50 PM | #24 |
my parent's oops...
Posts: 464
Karma: 1477570
Join Date: Feb 2009
Device: Vx->Handera->Clie-> Axim->505->650->KPW/Aura ->iOS/L2
|
Just in case there are some other users as unintelligent as I am.....
When I unpacked the bbb-1.0.0 zip it gave me a folder bbb-1.0.0 and I stupidly dragged that folder to the extensions folder (yes, I did read the instructions several times...). This give you the following screenshot. Solution is to only drag the bbb folder, not the bbb-1.0.0 folder to the extensions folder. Just in case this comes up with anyone else. Smart people can ignore everything I just wrote. |
02-24-2013, 03:05 PM | #25 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Next time - bbb-1.0.1 (or whatever) will unpack into its own directory name - making it possible to keep them separate on the system. The practice also protects against: "tar-bombs" (google that if you have to). |
|
02-24-2013, 03:13 PM | #26 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
Hint... it's not this
|
02-24-2013, 04:20 PM | #27 | |
Wizard
Posts: 4,742
Karma: 246906703
Join Date: Dec 2011
Location: USA
Device: Oasis 3, Oasis 2, PW3, PW1, KT
|
Quote:
Code:
$ tar tf bbb-1.0.0.tar.gz bbb/ bbb/menu.json bbb/frags/ bbb/frags/fw-base.txt bbb/bin/ bbb/bin/load-bbb.sh bbb/bin/del-filter.sh bbb/bin/report-cnts.sh bbb/bin/load-factory.sh bbb/config.xml refs/ refs/LICENSE.txt refs/amazon-net.txt |
|
02-24-2013, 04:46 PM | #28 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Who among you can read?
Quote, from top post of the thread:
Quote:
|
|
02-24-2013, 04:59 PM | #29 | ||
Wizard
Posts: 4,742
Karma: 246906703
Join Date: Dec 2011
Location: USA
Device: Oasis 3, Oasis 2, PW3, PW1, KT
|
Quote:
Quote:
There will be user-errors no matter how you package it. |
||
02-24-2013, 05:17 PM | #30 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
I was only replying to the Poster's Comment:
Quote:
|
|
Tags |
firewall, kual extension |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
KUAL: Kindle Unified Application Launcher (v2.7) | twobob | Kindle Developer's Corner | 2316 | 03-27-2024 06:23 PM |
KUAL DateTime Button | knc1 | Kindle Developer's Corner | 65 | 11-17-2023 01:16 PM |
A helpful list of Extensions for KUAL | twobob | Kindle Developer's Corner | 135 | 01-23-2023 11:20 PM |
[KUAL] Button Def. Packages (SUPERSEDED) | knc1 | Kindle Developer's Corner | 6 | 09-27-2013 07:56 PM |
HELP ME - with data for Big Brother Blocker (BBB) | knc1 | Kindle Developer's Corner | 12 | 02-11-2013 08:58 PM |