Instructions for patching firmware 4.18.13737 - Page 5

JSWolf · 10-05-2019, 08:03 PM

Quote:

Originally Posted by ZodWallop

First, thank you for your effort. That patch convinced me to update.

I'm seeing a bug. I wonder if anyone else can back me up.

If both header and footer are on, everything is fine (attachment 1)

When I turn off the header (in settings, set Chapter Progress to Off), the pages disappear from the footer (see attachment 2).

If you don't immediately see it, try turning a page or letting the reader go through a sleep/wake cycle.

This happens on every kepub I've tested so far.

Turning the header back on puts the page numbers in the footer back.

(Sorry the attachments are sideways. Not sure what happened there.)

Have you tried turning off the footer?

geek1011 · 10-05-2019, 10:51 PM

Quote:

Originally Posted by Phil_C

Yep, if you turn off the header (Chapter Progress in Settings), only the chapter number/name is shown in the page footer -- no page number or time remaining.

This won't bother me since I keep both header and footer visible, but it will be a problem for some folks.

I have a suspicion on why this is happening. I can probably fix it, and I'll do it next week.

forster01 · 10-06-2019, 07:49 AM

Quote:

Originally Posted by forster01

From my perspective, it appears that "Un-Force user font-family in KePubs:" does not work.
My stylesheet(embedded) fonts are not applied when i select the other font. Unfortunately.

Geek1011 can you please check that with the epub i sent you?

If i put all my font changes in span tag instead of paragraph tag then all seems to be working.

I.E. i just realised that all the special settings in the one paragraph should be in some kind of span tag.

ZodWallop · 10-06-2019, 01:09 PM

Quote:

Originally Posted by JSWolf

Have you tried turning off the footer?

Why would I do that? I want the footer on, with chapter and pages in chapter. Especially now that chapter progress has been replaced in the pop-up slider.

For now, I have both the header and footer turned off.

ZodWallop · 10-06-2019, 01:12 PM

Quote:

Originally Posted by geek1011

I have a suspicion on why this is happening. I can probably fix it, and I'll do it next week.

Thanks buddy. I know you're taking a week off. Just wanted to post about the bug while I was thinking about it.

Semwize · 10-06-2019, 04:37 PM

delete

Sirtel · 10-06-2019, 05:06 PM

About the patch Reduce top/bottom page spacer. It behaves differently for kepubs and epubs. Namely the kepub top and bottom margins (with the header and footer off) are much smaller than the epub margins. It's the same book, sideloaded from Calibre, in both epub and kepub. Is there a way to make the spacers in kepub the same size they are in epub? Otherwise they're a bit too small for my taste. Increasing margins in general also increases the right and left margin and I don't want that.

JSWolf · 10-06-2019, 05:25 PM

Quote:

Originally Posted by Sirtel

About the patch Reduce top/bottom page spacer. It behaves differently for kepubs and epubs. Namely the kepub top and bottom margins (with the header and footer off) are much smaller than the epub margins. It's the same book, sideloaded from Calibre, in both epub and kepub. Is there a way to make the spacers in kepub the same size they are in epub? Otherwise they're a bit too small for my taste. Increasing margins in general also increases the right and left margin and I don't want that.

If you are not using these patches, enable them...

ePub uniform font scale:
Set font scale factor: (set both replace values to 4)

if you are using the following, disable it...

KePub stylesheet additions: (along with) Example 4: Make KePub font sizes match ePub font sizes: ePubs render with 1.5 times the font size of KePubs by default. With this enabled they match.

What could be happening is that because the font sizes are different by default in ePub and KePub that the spacing when the header/footers are off is different. With the patches and changes I'm suggesting, it makes the font sizes the same and that might fix the spacing when no headers/footers to be the same. I cannot say for sure, but feel free to give it a go.

But even if it doesn't fix your problem, it means that the font size for ePub and KePub will match as the same font size setting.

Sirtel · 10-06-2019, 05:39 PM

Quote:

Originally Posted by JSWolf

If you are not using these patches, enable them...

ePub uniform font scale:
Set font scale factor: (set both replace values to 4)

if you are using the following, disable it...

KePub stylesheet additions: (along with) Example 4: Make KePub font sizes match ePub font sizes: ePubs render with 1.5 times the font size of KePubs by default. With this enabled they match.

What could be happening is that because the font sizes are different by default in ePub and KePub that the spacing when the header/footers are off is different. With the patches and changes I'm suggesting, it makes the font sizes the same and that might fix the spacing when no headers/footers to be the same. I cannot say for sure, but feel free to give it a go.

But even if it doesn't fix your problem, it means that the font size for ePub and KePub will match as the same font size setting.

I have the uniform scale patch enabled. The font size is exactly the same in both epub and kepub. But I haven't changed the font scale factor, might give it a try. It's the kepub default at present, I guess.

The issue is no big deal, as I use epub anyway and don't see that changing, unless Kobo fixes their kepub layout or makes the epub renderer buggy with an update. But it would be an impediment if I wanted to use both formats.

Giovascogna · 10-12-2019, 03:38 PM

Hi there.
It's the very first time i try to patch the firmware so I'm a complete rookie.
Shall I just switch No --►Yes, in the patches list?

When running kobopatch.sh, I get the following error:
Error: could not apply patches: could not load patch file 'src/libnickel.so.1.0.0.yaml': could not parse patch file: yaml: line 374: did not find expected key
How shall I replace the correct value?

Thank you very much! :-)

ps67 · 10-13-2019, 07:24 PM

May be You could have accidentally inserted or deleted a space in line 374 (or near) of the file "libnickel.so.1.0.0.yaml"?

Because it is important to preserve spacing.

Giovascogna · 10-14-2019, 02:29 PM

Quote:

Originally Posted by ps67

May be You could have accidentally inserted or deleted a space in line 374 (or near) of the file "libnickel.so.1.0.0.yaml"?

Because it is important to preserve spacing.

Ok, i'll check that!
So i just need to change no to yes....no need to do anything else, right?
Thank you

Giovascogna · 10-14-2019, 02:58 PM

Quote:

Originally Posted by Giovascogna

Ok, i'll check that!
So i just need to change no to yes....no need to do anything else, right?
Thank you

Ok, I made it!!!
I just had to set the right permission to the file!

GERGE · 10-16-2019, 05:02 AM

Anyone made a fontsize patch for Libra?

Vladi69 · 10-16-2019, 06:32 AM

When I run kobopatch.bat on Windows, no error message:

Quote:

Successfully saved patched KoboRoot.tgz to out/KoboRoot.tgz. Remember to make sure your kobo is running the target firmware version before patching.

But in the out folder there is no log file e no "KoboRoot.tgz".
I had no problems before.
What's wrong?

SOLVED using another PC

10-06-2019, 04:37 PM	#66
Semwize Guru Posts: 873 Karma: 252902 Join Date: Jun 2016 Device: Kobo	delete Last edited by Semwize; 10-06-2019 at 06:47 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Instructions for patching firmware 3.13.1	GeoffR	Kobo Developer's Corner	56	07-01-2016 10:59 AM
Instructions for patching firmware 3.15.0	GeoffR	Kobo Developer's Corner	146	05-24-2016 07:10 AM
Instructions for patching firmware 3.16.10	GeoffR	Kobo Developer's Corner	12	08-14-2015 04:40 AM
Instructions for patching firmware 3.2.0	DNSB	Kobo Developer's Corner	66	12-05-2014 08:28 AM
Instructions for patching firmware 3.3.x, 3.4.x, 3.5.x	GeoffR	Kobo Developer's Corner	285	08-27-2014 11:06 AM

10-06-2019, 05:06 PM	#67
Sirtel Grand Sorcerer Posts: 8,985 Karma: 219221630 Join Date: Jan 2014 Location: Estonia Device: Kobo Sage & Libra 2	About the patch Reduce top/bottom page spacer. It behaves differently for kepubs and epubs. Namely the kepub top and bottom margins (with the header and footer off) are much smaller than the epub margins. It's the same book, sideloaded from Calibre, in both epub and kepub. Is there a way to make the spacers in kepub the same size they are in epub? Otherwise they're a bit too small for my taste. Increasing margins in general also increases the right and left margin and I don't want that.

10-12-2019, 03:38 PM	#70
Giovascogna Junior Member Posts: 7 Karma: 10 Join Date: Oct 2019 Location: Italy Device: Kobo Glo, Kobo Clara HD, Kobo Libra H2O	Hi there. It's the very first time i try to patch the firmware so I'm a complete rookie. Shall I just switch No --►Yes, in the patches list? When running kobopatch.sh, I get the following error: Error: could not apply patches: could not load patch file 'src/libnickel.so.1.0.0.yaml': could not parse patch file: yaml: line 374: did not find expected key How shall I replace the correct value? Thank you very much! :-)

10-13-2019, 07:24 PM	#71
ps67 Guru Posts: 727 Karma: 7000000 Join Date: Aug 2017 Location: Italy Device: Kindle Paperwhite, Kobo Elipsa, Pocketbook Color PB633, Inkpad Color	May be You could have accidentally inserted or deleted a space in line 374 (or near) of the file "libnickel.so.1.0.0.yaml"? Because it is important to preserve spacing.

10-16-2019, 05:02 AM	#74
GERGE Guru Posts: 732 Karma: 5797160 Join Date: Jun 2010 Location: Istanbul Device: Kobo Libra	Anyone made a fontsize patch for Libra?

Advert

Advert