02-13-2020, 12:46 PM | #511 |
Member
Posts: 16
Karma: 10
Join Date: Jan 2018
Location: DC
Device: Kindle Voyage (WiFi)
|
Tejjy,
I used this serial adapter (I ordered from the US site, but it seems to be available through Amazon.co.uk also): https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1 It was easy to set the voltage to 1.8v with the jumper. |
02-16-2020, 02:08 AM | #512 |
Junior Member
Posts: 1
Karma: 32
Join Date: Feb 2020
Device: PW2
|
Thanks for the easy to follow guide. Finally got custom a screensaver on my PW2 now. (5.11.1.1 via serial).
Last edited by pot; 02-16-2020 at 02:10 AM. |
Advert | |
|
02-21-2020, 05:46 AM | #513 | |
Junior Member
Posts: 3
Karma: 10
Join Date: Feb 2020
Device: Kindle Paperwhite 3
|
Quote:
|
|
03-14-2020, 10:53 AM | #514 |
Member
Posts: 10
Karma: 10
Join Date: Mar 2020
Device: Kindle PW3 FW 5.12.3
|
Guys, this adapter will work?
https://pt.aliexpress.com/item/40002...E&gclsrc=aw.ds |
03-14-2020, 05:56 PM | #515 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
See the set of three pin pairs with a single shorting plug? Set the shorting plug to the 1.8v position. Note: You can't see the labels on the pin pairs in that photo, but they are really there. This adapter only requires 3 wires, Tx, Rx, and Gnd It has its own built-in voltage reference, so no need to run a fourth wire for that purpose. |
|
Advert | |
|
03-14-2020, 09:40 PM | #516 | |
Member
Posts: 10
Karma: 10
Join Date: Mar 2020
Device: Kindle PW3 FW 5.12.3
|
Quote:
|
|
03-16-2020, 06:23 PM | #517 | |
Member
Posts: 10
Karma: 10
Join Date: Mar 2020
Device: Kindle PW3 FW 5.12.3
|
Quote:
https://pt.aliexpress.com/item/32694...B&gclsrc=aw.ds |
|
03-16-2020, 07:56 PM | #518 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
You will see on this forum that some people have used 3.3 volt devices, and without damage to the Kindle. But the technical manual on the SoC says: 1.8 volt, so that is the only thing that I recommend. |
|
03-17-2020, 11:00 PM | #519 | ||||||||
Reset
Posts: 39
Karma: 2448
Join Date: Jul 2017
Location: Recycle Bin
Device: Kindle PaperWhite Manga
|
JB Report
------------------------------------- PW3/Manga/32GB. FW: 5.10.1.1 SO status: Removed by Amazzzzoonn. JB status: Successfully. ------------------------------------- Just want to share my experience. Tear-down. This is the first time I do it. Quote:
Quote:
https://www.ebay.com/itm/142006114032 If you pick this cable, please use this driver: http://www.prolific.com.tw/UserFiles...ller_v1200.zip Only need Tx, Rx, GnD. The red one is 5V output. We should not touch it. Solder works is difficult to me. My eyes good but my hand shaking to much. We should suggest AMZ to improve their serial point, bigger maybe. Quote:
When I do "bootm 0xE41000", the last line look like that: Quote:
Look at the screen. OK, let me show you how the Touch-screen look. Quote:
01/ Use touch screen => (o)-Reboot or Disable Diagg => Login screen Then you can login with root/fiona_something. And option 2: Google : sock_init 1888 kindle I found this one. https://www.mobileread.com/forums/sh...9&postcount=22 From the post of stupidhaiku, just input "exit login" Then you can login with root/fiona_something. Next step should be processed exactly as the #1 of this thread. Sending file via USB mode. USB mode can be enabled via Diag mode by toching the screen. Quote:
MRPI and KUAL should be installed just after do jb.sh thing. And after finished JB, I don't want to do the solder works again. So just keep it inside and close the plastic cover. Quote:
Quote:
Thank you for every post here in this forum give me a chance to finish this JB. Please ask me if you need more pics, info or something else I could support. |
||||||||
03-17-2020, 11:04 PM | #520 | |
Reset
Posts: 39
Karma: 2448
Join Date: Jul 2017
Location: Recycle Bin
Device: Kindle PaperWhite Manga
|
Quote:
Check this link: https://www.mobileread.com/forums/sh...9&postcount=22 In short, when you see the line "sock_init 1888", you could type: Code:
exit login And if you want to use touch screen at this step, check this post (mine): https://www.mobileread.com/forums/sh...&postcount=519 Good luck ! |
|
03-21-2020, 11:27 AM | #521 |
Member
Posts: 10
Karma: 10
Join Date: Mar 2020
Device: Kindle PW3 FW 5.12.3
|
Hit any key don't work
Someone can help-me? I press any key, but can't stop the boot.
|
03-21-2020, 03:24 PM | #522 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Hold the 'any key' ** down when you see the first characters of the boot message.
Release when the process stops and waits at the prompt. Because you are already too late when you see the actual message. ** Last edited by knc1; 03-21-2020 at 03:27 PM. |
03-21-2020, 04:46 PM | #523 | |
Member
Posts: 10
Karma: 10
Join Date: Mar 2020
Device: Kindle PW3 FW 5.12.3
|
Quote:
I tried this procedure of restarting and pressing Enter for more than 10 times and was unsuccessful. I'm using the FT232RL board with AMS1117 as described in other tutorials and also in this video: https://youtu.be/G4PwWHz65Z0 I can't understand what's wrong. I can read the outputs at the terminal, but without success when pressing any key. I thank you in advance for all the help you have given knc1. S / N Prefix: G09 0G1 Model Name: Kindle PaperWhite 3 (2015) Wi-Fi |
|
03-23-2020, 05:19 AM | #524 | |
Reset
Posts: 39
Karma: 2448
Join Date: Jul 2017
Location: Recycle Bin
Device: Kindle PaperWhite Manga
|
Do you mind to hit [SPACE BAR] at this moment ?
Quote:
Last edited by anhyeuviolet; 03-23-2020 at 08:02 AM. |
|
03-23-2020, 10:56 AM | #525 |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
rudi.jdi :: "I tried this procedure of restarting and pressing Enter for more than 10 times and was unsuccessful."
WHEN are you first pressing the key? That statement does not seem to follow the directions I gave you. You must do this exact order: 1) have finger near key to be pressed 2) press restart 3) press the key of your choice AND HOLD IT DOWN DO NOT wait for any of the messages to appear, press the key down NOW and hold it down. 4) do not let up on the key until the start routine presents the u-boot> prompt. 5) yes, your keyboard will repeat the key that you hold down, while you are holding it down. But that does no harm. 6) now release the key that you are holding. |
Tags |
serial jailbreak |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How much would people pay for easy serial jailbreaking their paperwhite? | coplate | Kindle Developer's Corner | 3 | 02-21-2018 12:45 PM |
Serial Jailbreaking FW >= 5.6.1.1 | knc1 | Kindle Developer's Corner | 6 | 08-14-2017 08:38 AM |
Need help jailbreaking this kindle that i have | wizo | Kindle Developer's Corner | 5 | 11-15-2012 07:50 AM |
Free (Kindle) A Little Bit of Everything For Dummies | arcadata | Deals and Resources (No Self-Promotion or Affiliate Links) | 1 | 11-23-2011 10:51 AM |
Which Kindle do I need for jailbreaking? | chas0039 | Kindle Developer's Corner | 6 | 11-10-2010 10:04 PM |