05-12-2012, 02:14 PM | #1 |
Junior Member
Posts: 2
Karma: 10
Join Date: May 2012
Device: Kindle Touch
|
Kindle Touch stuck at Diags page
Hi all,
I just put all the jailbreak files into the Kindle and restart my KT. Once rebooted, I press Exit, Reboot or Disable Diags and then accidentally press Fastboot bundle install.... After press Fast boot bundle install, then screen has no longer respond my press, it just stuck at the diags screen, can't turn it off, can't find the USB drive on Windows and no respond to me. What can I do now? |
05-12-2012, 02:58 PM | #2 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
You can change the bootmode from fastboot to main using the fastboot tool, or you can change the bootmode from a diags SSH prompt or RUNME.sh script (idme -d --bootmode main). Both methods are documented in the "simple debricking" sticky. There is no need to start a new thread. You should have added it to the "simple debricking" sticky thread. For that matter, you would not have needed to ask for this help if you followed the instructions in that thread first. Please read this link: http://mattgemmell.com/2008/12/08/what-have-you-tried/ Then go read the "simple debricking" sticky thread at the top of this forum (including the linked threads and other references). Then if you have questions, post them in that thread (not here). You will understand our answers if you do your "homework" first, but the information is complete enough that you will probably not have any questions after you do your homework. The number of downloads of forensic image files is far larger than the successful debricking reports, indication that MANY people successfully debricked their kindles on their own using the information that we provide here, without needing to ask additional questions. You can do successfully fix your kindle yourself too. Just follow the instructions that we provided. We are glad to help unusual cases where those instructions are not enough, but please do not waste our limited and valuable time by asking "Frequently Asked Questions" that have been answered many times. But especially, we do not need new threads for old "worn-out" topics. Last edited by geekmaster; 05-12-2012 at 03:16 PM. |
|
Advert | |
|
05-12-2012, 10:35 PM | #3 | |
Junior Member
Posts: 2
Karma: 10
Join Date: May 2012
Device: Kindle Touch
|
Quote:
I try to use the mfgtool on Win 7, however, it said, please connect device. I found that Windows 7 couldn't find my kindle even I followed the Magic Key steps. The windows 7 can't recognize the KT as well as its USB storage. Seems the KT is totally turned to a brick. |
|
05-12-2012, 11:38 PM | #4 |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Windows fastboot needs the libusb drivers installed correctly, using instructions and links provided in the debricking threads. Fastboot mode does not change what is on the screen. It only changes the USB VID/PID that a usb utility (or device manager) would show you.
There is no such thing as "totally turned to a brick" unless you have a serious HARDWARE failure. You would know this if you read the stuff I told you to read. Go read it. All of it. Including the linked threads. Do it. Do it now, before you are tempted to ask another frequently asked (and answered) question. Thanks. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem to exit ENABLE DIAGS in kindle touch | luis_ox | Amazon Kindle | 7 | 08-04-2012 08:01 PM |
Kindle 4 Crashed in Diags Mode | drajov | Amazon Kindle | 6 | 07-25-2012 03:34 PM |
HELP kindle 4 diags | hawk72 | Kindle Developer's Corner | 3 | 05-03-2012 09:42 AM |
Kindle Touch Stuck at diags | sole | Kindle Developer's Corner | 13 | 05-01-2012 08:47 AM |
page buttons on kindle touch? | bluerfoot | Amazon Kindle | 21 | 12-14-2011 05:08 PM |