PW2 PW2 and others debrick from Erase MMC successful!

[Santatic]

My Kindle PW2 bricked 2 weeks ago and I painfully Erase MMC
I stuck until today.

I try many option but only this work.
Hope it help to you!

Get some info from:
https://gist.github.com/TobiasWooldr...ca75190b9a473f
https://gist.github.com/TobiasWooldr...omment-3435765

My step to debrick:

1. Download new version of Kindle from Amazon
   My Kindle PW2, so I get https://www.amazon.com/update_Kindle...white_10th_Gen
   
   And I get https://www.amazon.com/update_Kindle_Paperwhite_6th_Gen to get uImage
   
2. Extract update_kindle_paperwhite_v2_5.12.2.2.bin by kindletool to pw2 folder:

   ./kindletool extract update_kindle_paperwhite_v2_5.12.2.2.bin pw2

3. Connect your Kindle to minicom by press power button ~ 16 seconds
4. Run bist fastboot to connect to fastboot
   

   sudo ./fastboot flash kernel uImage
   sudo ./fastboot setvar bootmode system
   sudo ./fastboot reboot

   when your Kindle reboot you will see your kindle start new kernel
   Press any key when you see

   Press [ENTER] for recovery menu...

   to enter Recovery Menu
   
5. If you did something before you can choos option 4. Erase MMC again
   If not you can choose I. Initialize Partition Table (fdisk) and format FAT
   Then O. Format and overwrite FAT partition
   Then E. Export FAT partition
   
   After Export FAT your kindle should connect to your USB port
6. Rename your update_kindle_all_new_paperwhite_5.16.2.1.1.bin to update.bin
   Then copy update.bin to your Kindle USB Port
   
7. Remove your Kindle USB port from your computer then your Kindle will show Recovery Menu again
8. Choose: U. Update using update*.bin file on FAT partition then your update will be install
9. Now you can setup your Kindle like a new device