01-02-2009, 02:31 PM | #1 |
Member
Posts: 16
Karma: 102
Join Date: Nov 2008
Device: EZ Reader (Hanlin V3)
|
Review of the EZ Reader, especially for serialized books in Chinese
Please also see post #5 and #12 for an update on my experiences!
I just got my EZ Reader yesterday. I'm just going to review the aspects I tried. Please note I've only tried PDF, HTML, TXT, ZIP, and JPG formats. Color choices: Unlike a press release I read somewhere, the only color available was black. No red, blue or green. Bummer, but I'll live. Shipping and delivery time: The shipping time was exceptional! It was shipped the day after I ordered it, via Fedex Ground. Reader: The reader felt like quality construction. I also don't think it's ugly. True, it's not as nice as Sony's but hello ... Kindle, anyone? The page navigation buttons could stand being moved to the right side of the reader, as I usually hold my paperback books in my right hand, not my left. It has a nice solid feel in my hand, and is somewhat heavier than paperback book, but not too bad. The SD card slot at the top of the reader does not have a rubber cover on it, so I will need to see if I can find one (otherwise, I can easily see gravity dumping tons of dirt into the hole over time). The USB port and audio jack is at the bottom of the reader. Accessories: As mentioned in other reviews, the standard package comes with a leather case, USB charger, USB cable to connect to the computer, and a little screwdriver to open the battery door. For those people wondering why the battery wasn't installed in there by default, two guesses: 1) If a battery corrodes inside an electronic device, it destroys the electronic device too; 2) it might lessen the life of the battery Battery: As has been mentioned in other reviews, it appears to use a replaceable Nokia phone battery. I haven't checked to see how easy it is to get a replacement battery on Ebay or Radioshack, but I've read elsewhere it's not a problem. Leather case: The leather case is a nice soft black leather, and holds the reader very securely on three sides (you just slide it in). It's much better than Sony's leather case, which holds its reader by this swinging knob thing (a friend of mine got it and it fell out of the case; she's getting Velcro to make her Sony Reader more secure). I am pleased to report I don't think Velcro is necessary for the EZ Reader. What I found weird at first is that the magnetic clasp closes on the back, instead of the front (so the lumpy clasp part is behind). After using it for a while, I realized that the position of the clasp makes it easier to hold (and if you're laying it out flat on a table, the clasp is not sticking up right next to the ereader). It does appear to display smudges from my oily fingers, so I have to rub it occasionally to clean the oil off. One concern of mine -- all the different ereaders have slightly different dimensions and designs, so their covers are not interchangeable (for example, there's no way in heck Sony's cover could work for the EZ Reader, since it expects a hole at the top and bottom of the reader). So there's no options to buy a pink or other color cover for the EZ reader unless you get it custom made. Charging: Don't know how long it took to charge, since I charged it while I was sleeping. It turns out any USB charger will work; I know, since I successfully used my Motorola phone charger to charge it via the mini USB port It also seemed like I could use it while it was charging, though I got stuck on the first page of Jane Austen, and the page turning buttons weren't responding. So not too sure if you actually can. Chinese support: I tried to view text files encoded in the Chinese GB2312 encoding. When the EZ reader's system language was "English" (the default), the text file displayed Cyrillic. After I changed the system language to Chinese, the text file was able to display propertly. Loading of the 1 MB file was really fast, despite it being a 1000+ page count. I also tried HTML files encoded in GB2312, and they displayed great. Didn't try with the system setting in English though. Changing the system language was very easy, BTW. Adding books: Adding books was a snap! I just had to plug it into the computer, hit the OK button, and it showed up on my Windows laptop as an external drive. Weird thing was it showed up as two drives, but I could only access one of them to add files. Adding the files was as easy as copying and pasting. You cannot use the reader while it is plugged into your computer. I will try with my Mac next and see if it works too. You do not have to put all your books in the "Ebooks" folder. You can create new folders / add files directly to the base, and it will show up. Directory support: You can add folders and subfolders to organize the books even more. It also supported and displayed non-English named folders (I used Chinese to name some folders, and it displayed fine). Just a quick note: This was after I changed the system language to Chinese; didn't check to see if it would display the Chinese folder name if the system language was English. Display: The display is excellent; very clear and sharp. The background is a very light grayish white. If you are near a Borders or Target or something, you can stop in and look at the Sony Reader 505 display; it's the same contrast and everything (The Sony 700's display has some reflective touchscreen over the e-ink panel, so it's actually less nice than the 505 or the EZ Reader's display). Display Response Time: Usually response time was very fast. Sometimes, there is the blackout of the screen that others have mentioned, but other times, I did not notice it. It takes a few seconds to load the book; I've heard that's because it needs to calculate the pagination. For really big books, it can take longer. Magnification: The EZ Reader only gives you the option of 1x, 2x, and 3x magnification. You can't make the fonts any larger than that, so the fonts may be either too small or too big for some people. For English books (I tried Hans Andersen's fairy tales), the smallest font size was a nice readable size, but may be too big for some people. For Chinese books, the smallest font size was kind of small, so the biggest font may still be too small for some people. Buttons: The buttons beep when I press down on them; I wonder if it's possible to turn off the beep. It's stopping me from trying to unobtrusively sneak in some reading at a really boring meeting Comic books (navigation): I tried loading some zipped chapters of Japanese manga/scanlations. The files were JPG files in a multifolder directory zipped into a ZIP file. The extension of the file was ".zip". I could only view one image at a time, and had to go back to the booklist to pick the next one. Maybe I'm missing some step here... Comic books (image quality): Image quality was like a 2nd generation photo copy. Somewhat spotty, but nowhere near the smoothness of a great grayscale manga from Viz. Still readable, though. It's only got 4 shades of gray, so I shouldn't have expected too much. Also note that the EZ Reader won't "chop up" the image into smaller pieces (so you can't, say, zoom in in landscape mode on the first half of the pic, then hit "next" to go to the next section of the pic). PDF: The PDF display kind of sucked for me. Not really the fault of the EZ Reader, but when you try to view a file that's meant for an 8 by 11 page on a 6 inch screen, readability decreases tremendously. I loaded a bus schedule and a PDF document on how to type in Chinese. The bus schedule was ok at the highest magnification setting. The "how to type in Chinese" doc was completely illegible, even at the highest magnification setting. It also did not reflow properly. To be fair, I picked PDF files that had lots of tables. Other people have had great experiences, but I'm guessing that they were viewing text-only PDFs. For people who are interested, these are the test files I used: Bus schedule | How to type in Chinese PDF Text display: English files are displayed as justified text, so spacing may sometimes be a little weird. Chinese files ... the smallest font size is the same size used in those little mainland China paperback books the size of your hand. However, because of the anti-glare and the e-ink, I have no problems reading it, as opposed to when I had to blow up the fonts enormously when I was reading on my laptop. Plus, my eyes don't hurt after reading for a while! Navigation in the book: You had options to jump to the first page, the last page, or a specific page in the book. Also, if you leave a book (have only tried with HTML/TXT), it automatically remembers where you left off if you re-open it later. I have some complaints about navigation options in the book, which I'll explain later down in the post (see my section about reading serialized novels on EZ Reader). Navigation in the booklist: Navigation in the booklist is more inconvenient than navigating inside a book. You can only navigate by clicking the forward and back buttons. There is no way to jump to, say, page 5 in the booklist. You can imagine the problem this would be if you had hundreds of books. The directory support helps a little, but they should really fix the software to add "Go to page xxx" support. If you exit a book and go back to the booklist, you will end up on the page with the book that you last read. So that's good. Sorting options: You can sort books in a folder by book name or date last modified. For HTML files, it uses the text in the "TITLE" element of the HTML file as the book name. These 2 options are very limiting! I really hope that they add an option to sort books in a folder by file name too (see my gripe about reading serialized novels on EZ Reader, below). My experience with using EZ Reader for reading serialized novels: So in general, the EZ Reader is great. However, there are some features that I wish it would add, which would make my reading experience much better. I tend to read a lot of serialized fanfics on the web. These fanfics are posted chapter by chapter, in HTML format. Each chapter can easily be 10-20 pages on the EZ Reader. And each complete fanfic can easily be over 300+ chapters (so that's over 3000 pages). Finally, sometimes the writer changes his/her mind about a detail in the story and goes back to change what happened in older chapters to make it fit in with what happens in the newest chapter, so I have to redownload the older chapter. Now, what does that mean for the EZ Reader? I don't really want to use MobiPocket to compile all the HTML chapters into one "book"; I'm lazy and would really rather just drag the HTML files into a folder for the book on the EZ Reader. Because EZ Reader uses the TITLE element in the chapters, I have a ready made table of contents when I open the subfolder (folder inside the Ebook folder) to view the chapters. Problem 1: The chapter numbers are spelled out "Chapter One, Chapter Two, etc". So sorting alphabetically does not work. How about sorting by date modified? Remember that I sometimes have to redownload older chapters, so the older chapter can sometimes have a "newer" date modified. That throws the order of the chapters out of whack (e.g. I'd have chapter one, two, four, five, six, seven, three). So, the best fix to the problem would be if I could sort the files by actual file name, since I can always guarantee those will be in the correct order (e.g. chapter001.html, chapter002.html, etc). Jinke are you listening?!! Problem 2: I mentioned earlier that my serialized fanfics have hundreds of chapters. That's a problem with EZ Reader, when I can only navigate teh book list by pressing the forward and next buttons. Think how many times I have to press the button to go to the 350th "book" in the current directory! Divvying up the files into subfolders is a compromise, but I would vastly prefer to be able to go to page 50 in the folder/bookshelf as well. If I can do that inside the book, how much harder can it be to do that in the bookshelf mode too? Ok, now I've selected a chapter and am reading it. At the end of the chapter, there's no option for me to go directly to the next chapter / file / book in the bookshelf. So I have to go back to the bookshelf (which fortunately sends me back to page 50 in the bookshelf, or wherever I last was), and then I select the next chapter to read. That's annoying! It would be great if I could just go Options > Go to next book listed in book shelf. That would also solve my problem with the comic book files (which I mentioned earlier). So in summary, my wish list for Jinke's next firmware update would be: 1. Ability to jump directly to a page number in the bookshelf 2. Ability to jump directly to the next "book" in the bookshelf while inside a book (the next book it jumps to should depend on what sort order you chose for the bookshelf). 3. Ability to also sort books on the bookshelf by physical file name. Overall: This is a great, easy to use reader that just needs some minor features added to its software. I don't need wireless. I love the replaceable phone battery it uses. The accessories it comes with are great, although some enterprising merchant should start selling other covers to come with it! BTW, I am using the firmware version that came with the reader: V2.00ASTAK.081024 Last edited by miki; 01-21-2009 at 01:55 PM. Reason: updated comments on reader & case |
01-02-2009, 03:11 PM | #2 |
Member
Posts: 16
Karma: 102
Join Date: Nov 2008
Device: EZ Reader (Hanlin V3)
|
Please rate this thread if you think my review was useful! It would also be great if you let me know what you think of my feature wishlist (esp. as regards sequential files).
|
Advert | |
|
01-02-2009, 06:41 PM | #3 | |
Grand Sorcerer
Posts: 11,470
Karma: 13095790
Join Date: Aug 2007
Location: Grass Valley, CA
Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7
|
Quote:
Personally I think the answer to sequential files is zip and CBZ support. Dealing with a whole directory full of loose files is problematic IMHO. Since you are reading work in progress I can see your point but for most of us something like ePUB with is a zipped set of xhtml files is a better way to go. CBZ is the same only for images instead of xhtml files. Using just a raw zip file with html files in it along with appropriate images etc. would be quite useful, particularly if a TOC could be generated on the fly with one entry for each file. This is close to your folder idea and probably both could be implemented in the same fashion if you assume a folder only holds one book. CBZ uses file names like you asked for but of course each file is only a page so CBZ support provides the correct functionality in file traversal and if implemented correctly you could even support bookmarks and continued reading support to return to the correct place. Dale |
|
01-03-2009, 07:44 AM | #4 |
Member
Posts: 23
Karma: 10
Join Date: Jun 2008
Device: None
|
PDF
For PDF's that don't render well try this free Mobipocket Creator:
I had PDF's that were manuals with tables also (two columns on the page). I converted tp PRC and they remder much better. It is not perfect but for non-standard docs, it works well. I think there is also software out there to convert to WOLF format (which is XML-based I believe). Haven't tried that yet, but you may want to give it a try. |
01-12-2009, 05:47 PM | #5 |
Member
Posts: 16
Karma: 102
Join Date: Nov 2008
Device: EZ Reader (Hanlin V3)
|
After a couple of weeks of use...
Ok, I have been using the EZ Reader for a couple of weeks now, and these are my new experiences.
Solution to the file directory sorting problem: I mentioned my frustration with trying to get ongoing serialized books in a folder to display in order; well, I found a good solution to the problem -- I downloaded a free program that does nothing but change the "file modified" date all the files in a directory. If I change the file modified date for all the HTML files in the folder ("book"), and then tell the reader to sort by date modified, it usually works! Although you may get it in ascending or descending order, not sure. Screen refresh rate: The screen refresh rate slowed down as the battery life went down. It is still not bad, but yes, you do see the black flashes when the page redraws itself. Battery life, chargers, and more: For 1.5 weeks, I was happily reading and occasionally copying over files to the EZ Reader via the USB cable. The battery meter still indicated it was at full strength ... alas, it turned out to be a fantasy. I have read somewhere, though, that you should not trust the battery meter on the reader if you are using a brand new battery; you have to let the battery drain a couple of times before the meter will provide accurate readings. The battery was actually pretty completely drained after 1.5 weeks, or about 20-25 hours of reading. I'm not sure how many page turns that is; while it's not 8000 pages, that's an still excellent life. So anyway, I was happily reading, and then...the screen stopped responding, and the buttons stopped beeping. So I was stuck on page 10 of my current book. The little light at the top corner of the reader was a bright red. And the battery meter at the bottom right corner of the screen was still saying it was at full strength. I tried pressing the power button, doing a soft reset, then a hard reset. No response. So then I tried plugging in the EZ Reader to the AC charger it comes with (and it's a really weird charger), and left it plugged in overnight. There was no response from the reader (no changing to an orange flashing light, no beeping, etc) when I plugged in, but I was crossing my fingers and hoping for the best. Come the morning (say 8-10 hours later), nothing had happened. The battery charge was still at zero. So I can say pretty conclusively, the AC charger that comes with the reader sucks -- CORRECTION: The AC Charger works - see my latest post (Post #12) --. You should go out and get a AC charger retail (say a Motorola phone charger, which is what I used to charge up the reader the first time). I'm speculating here, but everytime I plug in the EZ Reader to my computer, it would ask me if I wanted to charge the battery or copy files over, and I'd have to click enter to confirm yes. Since the AC adapter is this weird looking thing you have to attach the USB cable to, maybe the EZ Reader needed me to confirm yes. However, since the OS had either gone to sleep or shut down or was frozen, my hitting the enter button was not registering with the reader. That's my guess (although I did not get asked whether I wanted to charge or copy when I plugged in teh reader to my phone's USB charger. Other options: I reviewed my options after the bundled adapter did not work: - Wait another 3 hours to charge the reader with my Motorola phone's USB charger - Try charging the reader by attaching it to my computer - Swapping out the battery with another Nokia battery. Confirmed that Nokia phone batteries can be swapped in I'm lucky I happen to have a Nokia phone and a retail USB phone charger. Three cheers for the EZ Reader using standard phone batteries! That's one thing none of the other readers out there have, and a major reason why I got this reader in the first place. I was too impatient to try the Motorola charger after waiting a whole night for the Astak's charger to charge the battery, so I swapped out the EZ Reader battery with my (fully charged) Nokia phone's battery, and voila! The EZ Reader restarted, and it worked again! The battery meter was even responsive and started to show the battery going down as the days went by. (And for the curious, my phone charged and is also working fine with the EZ Reader's battery; When I swapped the EZ Reader battery in, the phone indicated the battery charge level was VERY low and needed to be charged right away, despite being plugged in to the EZ Reader charger overnight). Final notes: I am very very very happy with the EZ Reader. I was not happy about the part where the battery ran down (while lying to me and saying it was still full), and the bundled AC charger didn't seem to charge. However, I think it is a case of it being a virgin battery; after it's been drained a couple of times, I think the battery meter will be more accurate (the battery meter certainly seems to be more accurate with my well used Nokia phone battery). Last edited by miki; 01-21-2009 at 01:54 PM. |
Advert | |
|
01-12-2009, 05:58 PM | #6 |
Grand Sorcerer
Posts: 7,452
Karma: 7185064
Join Date: Oct 2007
Location: Linköpng, Sweden
Device: Kindle Voyage, Nexus 5, Kindle PW
|
Did you test to turn the unit on when charging? Maybe it will not allow charging with the unit off.
The standard for charging via USB says that D+ and D- should be connected on the device side. Then it will detect that and not ask if you want to charge or transfer data. For my Nokia Phone (N85) if I use an ordinary USB cable it will only trickle charge. |
01-12-2009, 06:52 PM | #7 | |
reader
Posts: 6,975
Karma: 5183568
Join Date: Mar 2006
Location: Mississippi, USA
Device: Kindle 3, Kobo Glo HD
|
Quote:
I have seen reports with other devices that USB charging does not work with a completely flat battery, so perhaps this is the case here (which is a problem when USB is the only option). |
|
01-12-2009, 09:08 PM | #8 |
Member
Posts: 23
Karma: 10
Join Date: Jun 2008
Device: None
|
I had the exact same experience with the battery . I think it needs to run completely down a couple times per the manual.
|
01-13-2009, 05:54 PM | #9 |
Enthusiast
Posts: 34
Karma: 12
Join Date: Jan 2009
Location: Stuttgart, Germany/Wilmington, NC
Device: Kindle 2, iPhone
|
I sent an email to Astak asking about the buttons on the right side (since the BeBook has them). I was told that you can use buttons 9 and 10 to turn pages. I hope that helps some!
And thanks for the very detailed review! |
01-13-2009, 07:27 PM | #10 | |
Member
Posts: 16
Karma: 102
Join Date: Nov 2008
Device: EZ Reader (Hanlin V3)
|
Hi Tompe,
The EZ Reader does allow charging with the unit on, I think. When I first got the reader, I plugged it in to my Motorola USB phone charger to charge, and it instantly turned on (Astak splash screen, etc). My problem was that the battery had completely drained down, and it wasn't responding to my pressing down on the power button (and I tried holding it down for various lengths of time). And yes, I tried doing this before and after I plugged it in to the Astak USB charger. I wanted to read my stuff on the commute to work, so I didn't bother with other experiments; there obviously must be a solution to the "can't charge when battery is completely drained while you were in the middle of reading problem". Probably a good thing I should have tried, after the EZ Reader stopped responding to the power button, would have been to take out the battery and put it back in; that should "turn off" the device, so I could plug it in and get it charged. Oh well, hindsight. Quote:
|
|
01-16-2009, 07:56 PM | #11 | |
Astak Director, Bus. Devl
Posts: 2,560
Karma: 2500000
Join Date: Apr 2008
Device: Astak Pocket PRO
|
Just a note on charging
Quote:
you should see a picture of a battery with a lightning bolt. In any case, you should see something like this IF it is charging. Regarding colors, all we have now are in "Black" because colors take a minimum order and time to make. At CES we showed: white, black, red, marroon, blue and silver. ALL are beautiful; and we received overwhelming support to make them in colors. Colors are definitely coming. Maybe 5 weeks. You want them and we want them. Jinke has received the entire two reviews and is now already working on solutions for the EZ Reader. Robert B |
|
01-21-2009, 01:54 PM | #12 |
Member
Posts: 16
Karma: 102
Join Date: Nov 2008
Device: EZ Reader (Hanlin V3)
|
What to do when your battery is completely drained, and the AC adapter doesn't seem to be charging
This is just a quick update. The battery draining and screen freezing I mentioned in post #5 happened again; the reader wouldn't respond when I plugged in the EZ Reader's AC adapter. So I removed the battery and then put it back in again, and it was then able to charge. The screen restarted to show the welcome screen, and the reader started charging. I was also able to read to my hearts content while the battery was charging, so I can confirm that you can use the reader while plugged in to the AC adapter. Note that I wasn't able to do this when I first got the reader; My best guess is because the first time around, it was a brand new unused battery, while this time, it was a well used phone battery. One final thing of note: the battery meter is somewhat unreliable. The last time the battery was drained, the meter on the EZ reader said it was still at 100%. I blamed that on the battery being new. This time, the battery was definitely well used, had been drained and recharged several times (I used my old phone battery), and yet it was still not reporting the correct charge level on the battery. So, don't know what's going on with that, but I'd recommend you charge every few days, if you're a heavy reader. Again, another option is to use a dedicated USB charger such as a Motorola phone charger. Last edited by miki; 01-21-2009 at 01:58 PM. |
01-21-2009, 07:11 PM | #13 |
Grand Sorcerer
Posts: 11,470
Karma: 13095790
Join Date: Aug 2007
Location: Grass Valley, CA
Device: EB 1150, EZ Reader, Literati, iPad 2 & Air 2, iPhone 7
|
You need to discharge and charge the battery on the unit itself. The battery gauge has to be calibrated on the device itself. It won't calibrate if you charge the battery somewhere else.
Dale |
01-22-2009, 12:48 PM | #14 |
Addict
Posts: 231
Karma: 5588994
Join Date: Dec 2008
Location: Paris, France
Device: Cybook Gen3, Archos 80 G9, Sony PRS-650, Sony T1, Asus MemoPad.
|
Hi Miki, where do you get Chinese books in txt format? There is one on the Bebook site but of limited interest. Are there others out there? Can one buy a series such as the works of Jin Yong?
|
04-01-2009, 09:54 AM | #15 |
Heavy eBook User
Posts: 64
Karma: 13
Join Date: Aug 2008
Location: Malaysia
Device: Hanlin V8, V3, Fujitsu Tablet PC, EEE PC
|
Hi, do visit our blog, ebookreaderv.blogspot.com where we recommend some useful sites to download Chinese ebooks like Wuxia for Jin Yong, and mony mores in txt and other formats....cheers!
|
Tags |
ezreader, feature request, hanlin, review |
Thread Tools | Search this Thread |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Read Chinese books in Sony Reader PRS900 using Chinese Fonts | PSL | ePub | 3 | 10-08-2010 08:11 AM |
Sites for modern Chinese E-Books | HansTWN | Deals and Resources (No Self-Promotion or Affiliate Links) | 4 | 06-20-2009 10:00 PM |
Looking for Contemporary Simplified Chinese Books for PRS 505 | eldon | Sony Reader | 2 | 08-25-2008 05:22 AM |
The definite review: reading manga, comics, comic books on the Sony Reader | athlonkmf | Sony Reader | 25 | 07-04-2007 10:15 AM |