Problem with PRS-T3

infosix · 02-28-2017, 01:45 PM

I had a serious problem with my Sony PRS-T3. The screen is completely frozen and I have to open the device to reset it. I have check the board (visually inspection) and there is no trace of heating or water condensation).

And guess what the device work perfectly and flawlessly until I put the plastic cover on it. And again it freeze and I have to go back to square one. I have also try using some spacer before closing the device without any success.

Do you have any idea of the localization of the problem. May be a bad connector or something like that.

I need your precious help !

02-28-2017, 01:45 PM	#1
infosix Junior Member Posts: 5 Karma: 10 Join Date: Dec 2011 Device: Sony PRS-T3	Problem with PRS-T3 I had a serious problem with my Sony PRS-T3. The screen is completely frozen and I have to open the device to reset it. I have check the board (visually inspection) and there is no trace of heating or water condensation). And guess what the device work perfectly and flawlessly until I put the plastic cover on it. And again it freeze and I have to go back to square one. I have also try using some spacer before closing the device without any success. Do you have any idea of the localization of the problem. May be a bad connector or something like that. I need your precious help !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-T3 Problem with PRS-T3	victor861	Sony Reader	19	04-11-2017 05:57 PM
PRS-T3 PRS t3 Problem	Saturated	Sony Reader	4	08-17-2016 04:48 AM
Driver problem for PRS-T2 & PRS-T3, but not PRS-T1	DrChiper	Devices	10	06-13-2014 03:07 AM
PRS-T1 Problem with my PRS-T1, need help!	rangdaz	Sony Reader Dev Corner	0	08-24-2012 10:42 AM
PRS-T1 prs-t1 problem	mathematicap	Sony Reader	4	08-15-2012 09:59 AM