11-06-2019, 12:27 PM | #1 |
Connoisseur
Posts: 77
Karma: 564
Join Date: Sep 2016
Device: Icarus Illumina
|
Pocketbook inkpad 840 or 2 image file needed
Unfortunately I can't get the image file complete off my micro SD card. However I have everything else to get this ereader working again.
Does anyone have an image file, ideally of the 840 but I'll also give the inkpad 2 image file ago. Thanks |
11-06-2019, 02:13 PM | #2 |
TheBigFish
Posts: 30
Karma: 46180
Join Date: May 2010
Location: Belgium - THE surrialistic country
Device: boox note air / pocketbook 840
|
hehe, see other thread , i'll pm you my image
|
11-06-2019, 03:28 PM | #3 |
Connoisseur
Posts: 77
Karma: 564
Join Date: Sep 2016
Device: Icarus Illumina
|
|
05-05-2024, 12:40 PM | #4 |
Junior Member
Posts: 3
Karma: 10
Join Date: May 2024
Device: Pocketbook 840
|
840 InkPad 2 Image
Hello, pls, could not someone send me an image file for Pocketbook InkPad 2 840 too? My card is broken (read only problem), I have serial, but part of my files is missing, for example, /ebrmain/cramfs is empty, so it is impossible to to access files important for microSD change at all. Thank you very much.
|
05-05-2024, 02:09 PM | #5 |
Wizard
Posts: 3,009
Karma: 18765431
Join Date: Oct 2010
Location: Sudbury, ON, Canada
Device: PRS-505, PB 902, PRS-T1, PB 623, PB 840, PB 633
|
/ebrmain/cramfs is the mount point for the squashfs filesystem contained inside /ebrmain/cramfs.img. If the image file isn't in your ebrmain filesytem, then you can extract if from the firmware update package fairly easily using the firmware unpacking tools found on the internet.
|
05-09-2024, 02:26 AM | #6 | |
Junior Member
Posts: 3
Karma: 10
Join Date: May 2024
Device: Pocketbook 840
|
840 InkPad ReadOnly problem
Quote:
If someone would have any help or recommendation I would be happy. I know that PocketBook 840 is old type, but it is only 8" I can find. There are only 10" or 6-7" on the market, and it is too big or too small, I really like 840 InkPad 8".... Thank you very much. |
|
05-09-2024, 03:00 AM | #7 | |
Junior Member
Posts: 3
Karma: 10
Join Date: May 2024
Device: Pocketbook 840
|
cramfs.img size
Quote:
|
|
09-09-2024, 05:47 AM | #8 | |
Junior Member
Posts: 1
Karma: 10
Join Date: Sep 2024
Device: Pocketbook Inkpad 840
|
Quote:
There's another way to replace the internal micro SD card. I also tried the tutorial from your link last week but couldn't figure it out as I'm not used to Linux in general so I tried to find solutions which could work using Windows. Here's how I did it: 1. Download the serial.zip attached to this post and extract content on the root of your external SD card (this will place the serial.app in the "applications" folder on the external card), put the card in the reader and launch the app. It will generate a deviceinformation.txt file which contains the serial number of the reader (device serial) + the serial number of your external sd card (CID-external) that you'll need later. 2. Make a full backup image of the old (4gb) micro SD card. (used HDDRawCopy portable version https://hddguru.com/software/HDD-Raw-Copy-Tool/ ) 3. Restore the backup on the new (I used a Samsung EVO 32gb) micro SD card. -You won't need your old sd card anymore. From this point everything will be done on the new micro SD card- (keep the old card and the full backup around just in case you need to try again if something doesn't work) 4. I used VirtualBox and launched ubuntu https://ubuntu.com/download from it (it's not necessary to install it, I used the 'try ubuntu" mode, but be careful if you place files on it don't close the virtual box or save the state when you turn it off, to keep the folders/files) 5. On ubuntu I installed GIT (it retrieves packages in github) by opening a console from desktop and using the command sudo apt-get install git-all 6. The github package pocketbook-bootloop-fix helps to generate a .freezestatus file which is the file to replace on internal memory to be able to use the new sd card. The command to download it is git clone https://github.com/spanceac/pocketbook-bootloop-fix 7. Locate the pocketbook-bootloop-fix folder, then go to the Linux folder and open a console from that folder In the command prompt use the following command: make Then press ENTER Now that the tool is ready to generate files, this is the code that will generate the file you need: ./serial/serial --serial_number POCKETBOOK_SERIAL_NUMBER --sd_serial SD_CARD_SERIAL_NUMBER Where POCKETBOOK_SERIAL_NUMBER is the serial number of the device and SD_CARD_SERIAL_NUMBER your NEW sd card’s CID number. (don't be like me and use the old SD card's CID number and wonder what went wrong for hours lol) Example with random numbers: ./serial/serial --serial_number YT001900087600W000X9 --sd_serial 0xd709e03f Now you've got a .freezestatus file in the /pocketbook-bootloop-fix/Linux folder 8. To be able to copy it to the right folder you'll have to enable read/write permission for the new sd card. note: I don't know much about Linux so there might be a faster way to do it 9. Mount the sd card using a usb reader (Linux won't recognise the computer's micro sd card reader). I have one like this https://www.amazon.co.uk/Wen-Cheng-M.../dp/B073SYX1TF 10. From file manager I clicked on every folder that appeared (you should see about 5 folders) (for some reason this is the only way I found for the terminal to detect my folders, once they appeared in file manager I was able to apply commands for these folders) 11. There's a 103MB folder that cannot be read, try to open it anyway so it appears in media/ubuntu 12. Once all folders are visible in media/ubuntu I opened a console in that folder* and used the command: *(you can use cd /media/ubuntu/ to make sure you're in the right folder) sudo chmod -R -v 777 * 13. You should be able to open all folders now, locate the one that has a .freezestatus file (it should be a folder that contains other folders such as “dictionaries, lost+found, pbpk, ppbk,” etc.) , and replace the .freezestatus file present with the one you've created. That's it! Put the new card into the internal slot and it should launch. 14. (optional) Increase internal memory size using a bigger micro SD card: If you have a bigger SD card and want to increase the internal memory size, this post https://www.mobileread.com/forums/sh...8&postcount=89 sums up all the commands to use and works well! (don't forget to make a backup of the "Pocketbook" partition that contains all your personal files, as you have to delete the partition before recreating it). Thanks polossatik! -> To find the card's path name to be able to apply sudo fdisk /dev/sdx where x is a letter that can change each time you plug your card, go to one of the card's folder click right and go to the properties, then open it in Disks. Disks will display the full name of the partition's path (for instance /dev/sdd1, so you'll know to replace sdx with sdd for the command, don't add the partition number as fdisk will run for the whole sd card). If anyone has questions feel free to ask, this is summarised version of a longer tutorial I wrote to myself in case this happens again. Massive thanks to the other threads where I found the .freezestatus method and how to increase internal memory size. Links below https://www.mobileread.com/forums/sh...0&postcount=93 https://www.mobileread.com/forums/sh...55#post4406955 https://www.mobileread.com/forums/sh...d.php?t=278728 https://www.mobileread.com/forums/sh...8&postcount=89 Source of the serial.app (thanks a lot nhedgehog!) https://www.mobileread.com/forums/sh...2&postcount=56 Misc.: Formatting a micro SD card in fat32 using max 32kb sectors allows to put a bigger external SD card in the reader. Tried it using guiformat https://github.com/inconsistent-dg/g...readme-ov-file to format a 64Go sd card, works well. Ended up with 32Gb internal + 64Go external. Might work with bigger SD cards. |
|
09-09-2024, 11:12 AM | #9 |
Guru
Posts: 769
Karma: 625812
Join Date: Sep 2013
Device: EnergySistemEreaderPro, Nook STG, Pocketbook 622, Bookeen Cybooks ...
|
Be aware that, if you change the sd_serial, you will loose TTS support, since this is bound to the the original sd_serial too.
Last edited by nhedgehog; 09-09-2024 at 11:31 AM. |
Thread Tools | Search this Thread |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pocketbook Inkpad 840 firmware | Andrewski | PocketBook | 3 | 03-02-2017 08:12 AM |
Buy Pocketbook Inkpad 840 | jonch919 | Flea Market | 1 | 03-05-2016 06:23 AM |
Issues with Inkpad 840 | Cereal | PocketBook | 12 | 02-15-2016 10:28 AM |
Pocketbook inkpad 840 disponible | pierro78 | PocketBook | 13 | 06-06-2015 08:20 AM |
Kobo Aura H2O vs. PocketBook 840 InkPad | Buhaj47 | Which one should I buy? | 47 | 02-12-2015 10:07 PM |