08-19-2013, 02:15 PM | #1 |
Junior Member
Posts: 5
Karma: 10
Join Date: Mar 2009
Device: itouch
|
Viewing Content Server from the Internet
Viewing Content Server from the Internet
In the past I have, through trial and error, successfully set up the content server with my ebooks. At the present time, the content server is still available, but not through the interent. To my knowledge I have not changed anything, but something has changed. I can view the content server on my PC - no problem. I did not use 8080 for a port but another 4 digit number that worked for 6 months. I also decided to create a service for the content server, so that the server would be available 24/7. I used anyserviceinstaller and it worked fine. I could find my server on the internet by pointing to my internet address on the web. 68.45. __.___.___: and after a colon the port number I set up in calibre server. The service pointed to a cmd file that started the content server on a particular port. It worked - it was wonderful. The service appears to be working, I have checked it. As I said above the content server is not available on the Internet. I have checked my windows firewall and everything appears to be a go. I have checked my outside IP address with myipchicken and using that outside IP address I cannot get to the content server!! Recently, I started using x64 bit Calibre instead of x32 bit Calibre - would that be a factor?? Is there someone out there that is familiar with what I trying to explain here, can you give me a few hints to check out. Thanks Russ David |
08-19-2013, 07:45 PM | #2 |
US Navy, Retired
Posts: 9,864
Karma: 13806776
Join Date: Feb 2009
Location: North Carolina
Device: Icarus Illumina XL HD, Nexus 7
|
Since you seem to have jumped through most of the hoops it may be a x64 problem. Most folks x64 works fine but for some folks there are hiccups. Install calibre portable (which is x32) and see if that version works for you. It can be installed along side of any other version.
|
08-19-2013, 10:06 PM | #3 |
Wizard
Posts: 2,082
Karma: 8796704
Join Date: Jun 2010
Device: Kobo Clara HD,Hisence Sero 7 Pro RIP, Nook STR, jetbook lite
|
|
08-19-2013, 10:52 PM | #4 |
Well trained by Cats
Posts: 29,803
Karma: 54830978
Join Date: Aug 2009
Location: The Central Coast of California
Device: Kobo Libra2,Kobo Aura2v1, K4NT(Fixed: New Bat.), Galaxy Tab A
|
The path to 64 bit is different than 32 bit as far as your firewall is concerned.
You may need to update your white list |
08-19-2013, 11:09 PM | #5 |
US Navy, Retired
Posts: 9,864
Karma: 13806776
Join Date: Feb 2009
Location: North Carolina
Device: Icarus Illumina XL HD, Nexus 7
|
|
08-24-2013, 01:36 PM | #6 |
Junior Member
Posts: 5
Karma: 10
Join Date: Mar 2009
Device: itouch
|
Still no luck
Thanks to all who tried to help. My laptop died so I moved onto a desktop and added x64 Calibre to the desktop. I manage to salvage the hard drive for the laptop and my book collection is now residing on the desktop.
So... I decided to start over with the content server. Router is still set up with port forwarding. I used 4040. Server works on my desktop. Created a bat file (start calibre-server –port 4040 –with-library C:\Users\Russ\Calibre 2 Library). Used Anyserviceinstaller to create a service for the content server - service was created. Checked the windows firewall and the content server is allowed. I used my outside ip address as verified by Ipchicken and still no luck. I did get a message saying unable to connect to proxy server - That's a new one. Incidentally, I believe I got an unable to connect message in the past that mentioned DNS server something???. I have not changed anything regarding DNS or proxy or whatever. Just to repeat - the content server was working great about 2 weeks ago! Again thanks for your suggestions, if anyone has any other ideas, please let me know. Windows 7 x64 Linksys router with tomato 1.25 firmware 1.00 x64 Calibre Thanks Russ David |
Tags |
content server, myipchicken, service |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calibre Content Server and Windows Home Server 2011 | HughMcC | Calibre | 8 | 10-01-2014 07:26 AM |
500 Internal Server Error accessing content server Calibre 0.8.8 | DaddyO57 | Calibre | 1 | 07-20-2012 06:08 PM |
Content server not serving all content. | False_Chicken | Calibre | 0 | 10-19-2011 05:56 PM |
Problem Viewing Content | patchespepper | Calibre | 8 | 03-31-2011 02:40 AM |
Viewing Kindle Content-A question | Just4Fun | Amazon Kindle | 1 | 12-13-2007 03:07 PM |