![]() |
#1 |
Junior Member
![]() Posts: 8
Karma: 10
Join Date: Oct 2015
Device: Kindle
|
Request for PW3 kernel [posted in another thread]
i need Kindle pw3 kernel。who can help me?grateful for you!!
|
![]() |
![]() |
![]() |
#2 |
Ex-Helpdesk Junkie
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 19,421
Karma: 85397180
Join Date: Nov 2012
Location: The Beaten Path, USA, Roundworld, This Side of Infinity
Device: Kindle Touch fw5.3.7 (Wifi only)
|
Moderator Notice
Please do not post offtopic questions in unrelated threads. If you have a question to ask that does not fit in another thread, you can use the ![]() |
![]() |
![]() |
Advert | |
|
![]() |
#3 |
Going Viral
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
If you need a Kernel, then you need both the Kernel and its matching build of modules.
You don't mention which version, so just get the update*.bin file from the Amazon support page. Then take it apart with KindleTool from NiLuJe's snapshots thread. I have been advised that the current update packages __do__ ship the kernel along with the main filesystem (they didn't use to). Last edited by knc1; 10-21-2015 at 01:39 PM. |
![]() |
![]() |
![]() |
#4 |
BLAM!
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 13,484
Karma: 26012494
Join Date: Jun 2010
Location: Paris, France
Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E
|
You'll get the main kernel that way, yep. For diags, you'll have to resort to your own backups
![]() |
![]() |
![]() |
![]() |
#5 |
Junior Member
![]() Posts: 8
Karma: 10
Join Date: Oct 2015
Device: Kindle
|
SOS
my kindle is not jailbroken。
I used 1.8V TTL USB linked RX,TX,GND Choose the 4 Erase MMC0, Brush into PW2's(kernel main_kernel.img,diags_kernel diags_kernel.img)by the fastboot。I think that can be general....it's my fault ![]() Firmware Version 5.65(PW3,300ppi) U-Boot 2009.08-lab126 (Apr 15 2015 - 07:37:55) CPU: Freescale i.MX6 family TO0.0 at 996 MHz Temperature: 31 C, calibration data 0x5ae53a5f mx6sl pll1: 996MHz mx6sl pll2: 528MHz mx6sl pll3: 480MHz mx6sl pll8: 50MHz ipg clock : 66000000Hz ipg per clock : 66000000Hz uart clock : 80000000Hz cspi clock : 60000000Hz ahb clock : 132000000Hz axi clock : 198000000Hz emi_slow clock: 22000000Hz ddr clock : 396000000Hz usdhc1 clock : 198000000Hz usdhc2 clock : 198000000Hz usdhc3 clock : 198000000Hz usdhc4 clock : 198000000Hz MMC: FSL_ESDHC: 0,FSL_ESDHC: 1,FSL_ESDHC: 2 Board: Muscat WFO Boot Reason: [ POR ] Boot Device: NAND Board Id: ************** S/N: **************** I2C: ready DRAM: 512 MB Using default environment In: serial Out: serial Err: serial Quick Memory Test 0x80000000, 0x1fff0000 POST done in 111 ms Battery voltage: 4041 mV Hit any key to stop autoboot: 0 ## Booting kernel from Legacy Image at 80800000 ... Image Name: Linux-3.0.35-lab126 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2420416 Bytes = 2.3 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... [ 0.093625] boot: C def:bcut:batterycut=1 [ 0.250842] max77696-battery max77696-battery.0: MG characterization data not found, check boardid [-22] [ 0.271818] LPDDR2 MfgId: 0x3 [Elpida] 3.0.35-lab126 #1 Wed Aug 28 15:30:45 PDT 2013 armv7l [ 0.392663] mmc0: unrecognised EXT_CSD revision 7 [ 0.397387] mmc0: error -22 whilst initialising MMC card [ 0.611526] mmc0: unrecognised EXT_CSD revision 7 [ 0.616254] mmc0: error -22 whilst initialising MMC card [ 0.839608] mmc0: unrecognised EXT_CSD revision 7 |
![]() |
![]() |
Advert | |
|
![]() |
#6 | |
Going Viral
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Hint: look at the build date (2013), the PW-3 wasn't even manufactured back then. The initial factory install for the PW-3 is dated 20150630 and PW-3, 5.6.5 is even newer. The series 5.6.x firmware kernels **are not general**. Newer devices use a newer version of eMMC chip, which the older kernels can not use. Use the 5.6.5 kernel and filesystem image posted by amazon for the PW-3. http://www.amazon.com/gp/help/custom...deId=201756220 Use the most recent KindleTool build to take the update package apart to get at the files you need. https://www.mobileread.com/forums/sho...d.php?t=225030 You **do** need to flash the main filesystem image also, not just the (correct) kernel. Note: the main filesystem image is too large for fastboot to install. You need a working diags system installed first and use that to install the main system's filesystem. You will also need to flash a copy of the diags filesystem (not just the diags kernel). I don't know where you will get that, it isn't (yet) posted on any of our recovery image sites. Note: As a general rule, we do not post any recovery images on the image backup sites that Amazon is still distributing, but Amazon never distributed a diags system image. (That is present in the flash when the board is assembled.) Perhaps you can find someone in your own country that has a serial port installed on their PW-3 and who has not pressed the 'erase all' selection. ![]() Have them make you an image of the diags filesystem and diags kernel. The geekmaster scripts should still work for making the backup image of the diags kernel. https://www.mobileread.com/forums/sho...=backup+script The diags system image is the entire contents of /dev/mmcblk0p2. Additional (old) information here: https://www.mobileread.com/forums/sho...d.php?t=170929 = = = = PS: the 'erase all' command selection does work, it has since way back when it first appeared, there is no need to try it out. ![]() Last edited by knc1; 10-21-2015 at 05:13 PM. |
|
![]() |
![]() |
![]() |
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Posted in wrong thread] | dave trumble | Amazon Kindle | 2 | 07-17-2014 06:41 AM |
PRS-T1 How-to: Compiling the kernel and kernel modules | altruizine | Sony Reader Dev Corner | 9 | 09-03-2012 09:12 PM |
Which thread have I posted in? | Zippity | General Discussions | 12 | 01-19-2012 01:35 PM |
[Old Thread] Calibre 'feature request' thread | Waba | Calibre | 2 | 02-10-2010 07:52 PM |