10-13-2012, 09:56 AM | #106 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
exactly that : ) - was wondering if I should in fact be using a different driver. (as one already works just fine for the x server...)
I will go trawling for likely good output then (now at 81% charge, on USB trickle since 1AM this morning.) |
10-14-2012, 09:29 AM | #107 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
Fixed framebuffer info
Code:
id: mxc_epdc_fb smem_start: 0x75400000 smem_len: 2179072 type: PACKED_PIXELS type_aux: 0 visual: STATIC_PSEUDOCOLOR xpanstep: 1 ypanstep: 1 ywrapstep: 0 line_length: 608 mmio_start: 0x00000000 mmio_len: 0 accel: 0 Variable framebuffer info xres: 600 yres: 800 xres_virtual: 608 yres_virtual: 3584 xoffset: 0 yoffset: 0 bits_per_pixel: 8 grayscale: 1 red.offset: 0 green.offset: 0 red.length: 8 green.length: 8 red.msb_right: 0 green.msb_right: 0 blue.offset: 0 transp.offset: 0 blue.length: 8 transp.length: 0 blue.msb_right: 0 transp.msb_right: 0 nonstd: 0 activate: 128 width: -1 height: -1 accel_flags: 0 pixclock: 32258064 left_margin: 17 right_margin: 172 upper_margin: 4 lower_margin: 18 hsync_len: 15 vsync_len: 4 sync: 0 vmode: 0 rotate: 1 Last edited by twobob; 10-14-2012 at 09:37 AM. |
10-14-2012, 11:26 AM | #108 | |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
And a note for the next idiot who spends ages deciding what would be a quick way to view his hidden partitions
[root@kindle /dev]# mount -o loop /dev/mmcblk0p2 /mnt/mmc [root@kindle /dev]# cd /mnt/mmc [root@kindle mmc]# ls Quote:
|
|
10-14-2012, 11:37 AM | #109 | |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
After much faffing. I am of the conclusion that
Quote:
is at fault. as there is no dropbear there, nor any local folder for that matter. I'll have a play. add the symlink to /usr/local/bin and add in dropbear. see what happens |
|
10-14-2012, 11:47 AM | #110 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
Some kindles were reported to delete those files after you add them, which may be your problem as well... Perhaps we could add our own startup script that adds the missing /usr/local from a hidden location, at every boot. Last edited by geekmaster; 10-14-2012 at 12:42 PM. |
|
10-14-2012, 11:55 AM | #111 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
hmm. okay well I used Ixtabs installer. and they are missing. so I have added them myself using the loop mount. rebooting now. see what happens.
|
10-14-2012, 12:10 PM | #112 | |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
ah phooey.. yup deleted. sigh...
Okay... more digging. Quote:
Last edited by twobob; 10-15-2012 at 09:14 AM. |
|
10-14-2012, 12:56 PM | #113 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
okay so I found it...
../opt/factory/system_diags rm -rf /usr/local/* embedded in the binary... advice anyone? EDIT: Hex edited to rm -rf /usr/vocal/* (Kindle Diags Acapella version) EDIT A ZILLION YEAR LATER... you could use sed too.. Last edited by twobob; 03-13-2013 at 07:48 AM. |
10-14-2012, 01:02 PM | #114 |
but forgot what it's like
Posts: 741
Karma: 2345678
Join Date: Dec 2011
Location: north (by northwest)
Device: Kindle Touch
|
|
10-14-2012, 01:04 PM | #115 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
|
10-14-2012, 01:05 PM | #116 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Do you still have that bsdiff/bspatch package built? Maybe run off a bsdiff file that people can use to bspatch that binary with. (And maybe a second one so they can un-bspatch the change when it interferes with an ota update). Last edited by knc1; 10-14-2012 at 01:17 PM. |
|
10-14-2012, 01:13 PM | #117 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
no probs mate. it was good practice and you have more important things to do : )
all that said. still isn't fixed. see what this reboot brings about... EDIT: Well at least that is the "deletions" fixed. It's all still there now hmm. iptables? *goes digging again* nope: # Usbnet. All traffic allowed. -A INPUT -i usb0 -j ACCEPT Last edited by twobob; 10-14-2012 at 01:22 PM. |
10-14-2012, 03:00 PM | #118 | |
Going Viral
Posts: 17,212
Karma: 18210809
Join Date: Feb 2012
Location: Central Texas
Device: No K1, PW2, KV, KOA
|
Quote:
Or just the files where not deleted from the file system. Something, somewhere, has to start the server. And doesn't the K5 use the "upstart" init system (rather than sysv5)? ssh is working in "Main" - correct? Maybe poke around in the init scripts to see if one needs to be copied and/or added to the "Diags" image. Warning: Just guessing here. |
|
10-14-2012, 04:29 PM | #119 |
( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Tır
Posts: 6,586
Karma: 6299991
Join Date: Jun 2012
Location: uti gratia usura (Yao ying da ying; Mo ying da yieng)
Device: PW-WIFI|K5-3G+WIFI| K4|K3-3G|DXG|K2| Rooted Nook Touch
|
I've dug through the DIAGS startup in LOOPMOUNT/etc/upstart/diags and it looks to me like it should be called.
I'll linky it in a mo. Have to add some logging or something.... |
10-14-2012, 04:46 PM | #120 |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
K5 uses upstart only when booted from main, not diags. This could change with future firmware versions.
Diags actually runs a monolithic startup script that has a bunch of code copied from a bunch of upstart scripts. It is interesting to read the comments in that script. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
H.264 clip running on standard E Ink panel | Alexander Turcic | News | 95 | 03-19-2011 01:19 PM |
Death of E-Ink display? | DD1509 | News | 181 | 01-06-2010 04:48 PM |
Anybody knows the cost of E-Ink Display | jeffreylamster | OpenInkpot | 7 | 04-24-2009 01:49 PM |
Motorola has the first example of Android running on a E-Ink display. | Kris777 | News | 1 | 02-17-2009 11:09 PM |
Paperlike display running for 12 years and still going strong | Alexander Turcic | News | 3 | 06-08-2006 10:25 PM |