Problem installing Kindle ScreenSavers Hack

ratchetclank · 12-30-2015, 08:25 PM

Hi everyone,

I have a problem installing the screensaver hack on a PW2. I'm on 5.4.2.1 with KUAL installed.

I followed the install instruction but on the after the reboot step, I still get the default screensavers.

I tryed reinstalling the lastest jailbreak (it shoed the jailbrek message), rebooting and reinstalling the lastest KUAL, but with no effect.

I figgured out that I had a "back door lock" enabled in kual (I jailbreaked it many month ago and don't remember exactly what i had done), i disabled it but with no effect. I tryed the installation via the "update your kindle" and via MRPI but, also, with no effect.

I'm running out of ideas and i would have really liked to be able to change my screensavers.

dhdurgee · 12-30-2015, 08:36 PM

You don't have a "special offers" Kindle, do you? The screensaver hack will NOT work on a "special offers" Kindle. If you have "special offers" you have to pay Amazon to get rid of them and then do the screensaver hack.

If you don't have a "special offers" Kindle are you sure you are installing the proper binary? Check the first few digits of the serial against the table in the references to be sure which model you have and be sure you are usng the correct binary.

Dave

ratchetclank · 12-30-2015, 09:37 PM

I don't think it's an add supported one as of
1) the price i brough it (129 € in october 2013)
2) I had never see any ad on it neither when powerd up nor when in sleep mode

My serial start with B0D4, which, according to the comparison table indicate a "Kindle PaperWhite 2 (2013) WiFi (U.S., Intl.)"

Edit : Ok, I'm just a big MORON....
I downloaded and used the "kindle-python-0.14.N-pw2_kt2_kv_pw3.zip" instead of the "kindle-linkss-0.24.N.zip" ...

And that why kids, you shouldn't try to install thing past midnight ...

Anyway, thanks for the help ^^

eschwartz · 12-30-2015, 09:59 PM

Well, you installed part of the screensavers hack.

Should come in handy if you want book covers for screensavers.

...

Always take a look at the userstore, because chances are something would be left there.

In this case, the python folder, but you should've gotten the linkss folder.

12-30-2015, 08:25 PM	#1
ratchetclank Junior Member Posts: 2 Karma: 10 Join Date: Dec 2015 Device: PW2	Problem installing Kindle ScreenSavers Hack Hi everyone, I have a problem installing the screensaver hack on a PW2. I'm on 5.4.2.1 with KUAL installed. I followed the install instruction but on the after the reboot step, I still get the default screensavers. I tryed reinstalling the lastest jailbreak (it shoed the jailbrek message), rebooting and reinstalling the lastest KUAL, but with no effect. I figgured out that I had a "back door lock" enabled in kual (I jailbreaked it many month ago and don't remember exactly what i had done), i disabled it but with no effect. I tryed the installation via the "update your kindle" and via MRPI but, also, with no effect. I'm running out of ideas and i would have really liked to be able to change my screensavers.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K5 FW 5.x ScreenSavers Hack	NiLuJe	Kindle Developer's Corner	3026	Today 10:08 AM
Is it impossible to hack screensavers in K4 4.1?	nonfactor	Kindle Developer's Corner	1	07-04-2012 07:17 PM
Hack for screensavers on Kindle 2	KookyKathy	Introduce Yourself	5	01-09-2010 11:16 PM
Trouble installing screensaver hack on Kindle 2	sparrowlight	Kindle Developer's Corner	2	12-17-2009 11:17 PM
Hacks Kindle can not restart after installing unicode font hack!	nguyeng	Amazon Kindle	6	11-28-2009 10:34 AM

12-30-2015, 08:36 PM	#2
dhdurgee Guru Posts: 855 Karma: 2525050 Join Date: Jun 2010 Device: K3W, PW4	You don't have a "special offers" Kindle, do you? The screensaver hack will NOT work on a "special offers" Kindle. If you have "special offers" you have to pay Amazon to get rid of them and then do the screensaver hack. If you don't have a "special offers" Kindle are you sure you are installing the proper binary? Check the first few digits of the serial against the table in the references to be sure which model you have and be sure you are usng the correct binary. Dave

12-30-2015, 09:37 PM	#3
ratchetclank Junior Member Posts: 2 Karma: 10 Join Date: Dec 2015 Device: PW2	I don't think it's an add supported one as of 1) the price i brough it (129 € in october 2013) 2) I had never see any ad on it neither when powerd up nor when in sleep mode My serial start with B0D4, which, according to the comparison table indicate a "Kindle PaperWhite 2 (2013) WiFi (U.S., Intl.)" Edit : Ok, I'm just a big MORON.... I downloaded and used the "kindle-python-0.14.N-pw2_kt2_kv_pw3.zip" instead of the "kindle-linkss-0.24.N.zip" ... And that why kids, you shouldn't try to install thing past midnight ... Anyway, thanks for the help ^^

12-30-2015, 09:59 PM	#4
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85397180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Well, you installed part of the screensavers hack. Should come in handy if you want book covers for screensavers. ... Always take a look at the userstore, because chances are something would be left there. In this case, the python folder, but you should've gotten the linkss folder.

Advert