calibre 0.6 betas now available - Page 2

user_none · 06-07-2009, 07:07 AM

Quote:

Originally Posted by itimpi

Is there a way in the current 0.6b1 release to tell it to use a particular format as the input to the conversion if there is more than one possible format present?

Upper left corner of the convert dialog allows you to select the input format for single conversion. If you are doing bulk conversion, no.

itimpi · 06-07-2009, 08:25 AM

Thanks - I missed that!

sirbruce · 06-07-2009, 10:38 AM

Instead of backing up an existing library, is there an easy way to install 0.6 and have it create it's own library somewhere else? What about my existing preferences file; will there be a conflict?

user_none · 06-07-2009, 10:54 AM

Quote:

Originally Posted by sirbruce

Instead of backing up an existing library, is there an easy way to install 0.6 and have it create it's own library somewhere else? What about my existing preferences file; will there be a conflict?

Use the --with-library option. However, backing up your library is just a precaution for the beta just in case there is a bug (the db updating code for instance) that causes data loss.

kovidgoyal · 06-07-2009, 11:06 AM

Quote:

Originally Posted by sirbruce

Instead of backing up an existing library, is there an easy way to install 0.6 and have it create it's own library somewhere else? What about my existing preferences file; will there be a conflict?

You can start calibre from the command line as

calibre --with-library \pathto\new\folder

or just rename the existing library folder to something else

kovidgoyal · 06-07-2009, 11:18 AM

Your existing preferences file should not be affected by the update in that you should be able to go back and forth between 0.6 and 0.5 with the same preferences files. However to be absolutely sure, you can just copy the calibre preferences folder before updating.

Sabardeyn · 06-07-2009, 11:33 AM

Just a couple of questions on the beta:

1) Which version of XPath is supported?
2) With the change to fractional series numbers, does calibre impose any limitations on the format and numeric value?

I can already see future users asking these questions and/or trying to get calibre to do far more than currently expected with both features. For instance, Trekkers trying to enter Star Dates into the series number. Or users creating their own unique numbering scheme / index. Pbook filing system, DC Comics universe / timeline / setting.

You know, if I think about this any more I'm going to start wanting some of these...

kovidgoyal · 06-07-2009, 11:51 AM

The version of Xpath supprted is 1.0

You can use any number greater than or equal to 0 of the form d.dd as a series number

sirbruce · 06-07-2009, 02:15 PM

Quote:

Originally Posted by kovidgoyal

You can start calibre from the command line as

calibre --with-library \pathto\new\folder

or just rename the existing library folder to something else

It did not work. After I installed Calibre and even started it with that option, it went into a dialog box that asked me again what Library to use. I again specified the NEW library location, which has no files in it. Calirbe 0.6 then proceeded to give me a "Moving Library...." dialog box, with an Abort button I cannot click.

sirbruce · 06-07-2009, 02:17 PM

Clicking the X box killed the Moving Library, but then Calibre 0.6 started pointing to my existing library.

sirbruce · 06-07-2009, 02:18 PM

From what I can tell, luckily none of the files in the old library were removed, just copied.

sirbruce · 06-07-2009, 02:21 PM

Exiting the new version of Calibre 0.6 did not stop the process of library copying. Instead, a calibre-parallel.exe was left running in the background that continued to try copying books. This must be fixed as well.

kovidgoyal · 06-07-2009, 02:23 PM

Quote:

Originally Posted by sirbruce

It did not work. After I installed Calibre and even started it with that option, it went into a dialog box that asked me again what Library to use. I again specified the NEW library location, which has no files in it. Calirbe 0.6 then proceeded to give me a "Moving Library...." dialog box, with an Abort button I cannot click.

Ah yes you can't use this technique on a first run of calibre 0.6. Only subsequent runs. So just rename your old library folder.

kovidgoyal · 06-07-2009, 02:26 PM

Quote:

Originally Posted by sirbruce

From what I can tell, luckily none of the files in the old library were removed, just copied.

They are only removed after the copying completes

kovidgoyal · 06-07-2009, 02:27 PM

Quote:

Originally Posted by sirbruce

Exiting the new version of Calibre 0.6 did not stop the process of library copying. Instead, a calibre-parallel.exe was left running in the background that continued to try copying books. This must be fixed as well.

You really shouldn't exit calibre in the middle of a library move operation, it can have undefined results.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calibre metadata.calibre not allowing updates	Chuckels550	Calibre	10	08-09-2010 05:12 PM
Using Calibre as a client for another Calibre instance?	toddos	Calibre	27	06-30-2010 04:57 AM
Sigil 0.2.0 betas available	Valloric	Sigil	98	05-03-2010 04:07 PM
cannot open calibre on osx 10.6-- "Calibre is already running" message	jlip	Calibre	4	01-02-2010 11:05 PM
calibre command line utilities and calibre defaults	astrodad	Calibre	2	08-07-2008 03:27 PM

06-07-2009, 08:25 AM	#17
itimpi Wizard Posts: 4,552 Karma: 950151 Join Date: Nov 2008 Device: Sony PRS-950, iphone/ipad (Marvin/iBooks/QuickReader)	Thanks - I missed that!

06-07-2009, 10:38 AM	#18
sirbruce Provocateur Posts: 1,859 Karma: 505847 Join Date: Feb 2009 Location: Columbus, OH Device: Kindle Touch, Kindle 2, Kindle DX, iPhone 3GS	Instead of backing up an existing library, is there an easy way to install 0.6 and have it create it's own library somewhere else? What about my existing preferences file; will there be a conflict?

06-07-2009, 11:18 AM	#21
kovidgoyal creator of calibre Posts: 43,860 Karma: 22666666 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Your existing preferences file should not be affected by the update in that you should be able to go back and forth between 0.6 and 0.5 with the same preferences files. However to be absolutely sure, you can just copy the calibre preferences folder before updating.

06-07-2009, 11:33 AM	#22
Sabardeyn Guru Posts: 644 Karma: 1242364 Join Date: May 2009 Location: The Right Coast Device: PC (Calibre), Nexus 7 2013 (Moon+ Pro), HTC HD2/Leo (Freda)	Just a couple of questions on the beta: 1) Which version of XPath is supported? 2) With the change to fractional series numbers, does calibre impose any limitations on the format and numeric value? I can already see future users asking these questions and/or trying to get calibre to do far more than currently expected with both features. For instance, Trekkers trying to enter Star Dates into the series number. Or users creating their own unique numbering scheme / index. Pbook filing system, DC Comics universe / timeline / setting. You know, if I think about this any more I'm going to start wanting some of these...

06-07-2009, 11:51 AM	#23
kovidgoyal creator of calibre Posts: 43,860 Karma: 22666666 Join Date: Oct 2006 Location: Mumbai, India Device: Various	The version of Xpath supprted is 1.0 You can use any number greater than or equal to 0 of the form d.dd as a series number

06-07-2009, 02:17 PM	#25
sirbruce Provocateur Posts: 1,859 Karma: 505847 Join Date: Feb 2009 Location: Columbus, OH Device: Kindle Touch, Kindle 2, Kindle DX, iPhone 3GS	Clicking the X box killed the Moving Library, but then Calibre 0.6 started pointing to my existing library.

06-07-2009, 02:18 PM	#26
sirbruce Provocateur Posts: 1,859 Karma: 505847 Join Date: Feb 2009 Location: Columbus, OH Device: Kindle Touch, Kindle 2, Kindle DX, iPhone 3GS	From what I can tell, luckily none of the files in the old library were removed, just copied.

06-07-2009, 02:21 PM	#27
sirbruce Provocateur Posts: 1,859 Karma: 505847 Join Date: Feb 2009 Location: Columbus, OH Device: Kindle Touch, Kindle 2, Kindle DX, iPhone 3GS	Exiting the new version of Calibre 0.6 did not stop the process of library copying. Instead, a calibre-parallel.exe was left running in the background that continued to try copying books. This must be fixed as well.

Advert

Advert