Content Server issues

[dchapman]

Good day.

I am new here. Please be gentle.

Calibre 7.7.0 on Windows 11 Insider Preview.

This issue also occurred in earlier versions of Calibre.

Last fall the content server was working pretty well. Not terribly reliable but when it worked it worked well. I could connect from the localhost via a browser, from the LAN and from outside.

However, since early December the content server has not worked. Localhost, LAN, WAN, nothing happens. Port number unchanged. I tried HTTP and HTTPS.

I often get the error message:

------ begin error
calibre, version 7.7.0
ERROR: Unhandled exception: <b>ConnectionResetError</b>:[WinError 10054] An existing connection was forcibly closed by the remote host

calibre 7.7 embedded-python: True
Windows-10-10.0.22631-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.22631')
Python 3.11.5
Windows: ('10', '10.0.22631', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (2, 9, 0) && DeDRM (7, 2, 1) && Package KFX (from KFX Input) (2, 9, 0) && Barnes & Noble (1, 5, 3) && Fantastic Fiction (1, 6, 5) && Find Duplicates (1, 10, 9) && Goodreads (1, 8, 0) && Goodreads Sync (1, 16, 5) && KFX metadata reader (from KFX Input) (2, 9, 0) && From KFX (2, 9, 0) && KFX Input (2, 9, 0) && Set KFX metadata (from KFX Output) (2, 7, 0) && KFX Output (2, 7, 0) && Obok DeDRM (7, 2, 1) && Quality Check (1, 13, 10) && ePub Extended Metadata {Writer} (0, 11, 2) && ePub Extended Metadata {Reader} (0, 11, 2) && ePub Extended Metadata (0, 11, 2)
Traceback (most recent call last):
File "calibre\gui2\actions\device.py", line 243, in toggle_content_server
File "calibre\srv\embedded.py", line 145, in stop
File "calibre\srv\loop.py", line 758, in stop
File "calibre\srv\loop.py", line 688, in wakeup
File "calibre\srv\loop.py", line 682, in write_to_control
ConnectionResetError: [WinError 10054] An existing connection was forcibly closed by the remote host
------ end error

At this poiint I have always rebooted the computer as I am guessing this error is a Windows problem.

Any ideas?

Thanks,

David Chapman

[Cactus Chef]

Mods might want to move this to the Calibre forum.

[kovidgoyal]

This will be caused by a security/antivirus/firewall type program. Add exceptions for calibre.exe to such programs. You can also reboot in safe mode with networking to check.

[dchapman]

Thank you for the response.

Would anti-virus or firewall effect a local browser connection? ie.
Connect/share -> Visit Content server in browser?

I did restart in safe mode with network. No change.

I also disabled the firewall and VPN (both Bitdefender). Windows Defender is disabled.

I tried mild swearing. No change.

Any other thoughts?


Thanks again.

[kovidgoyal]

antivirus definitely would, it tends to take exception to programs communicating with each other often. In this case the communication is actually between a pair of sockets in the same program (the server's "control" pipe).

From the traceback it looks like the error happens when you are stopping the server. So this shouldnt be critical anyway. Restarting calibre should be enough. No need to restart the computer.

[dchapman]

Still struggling with this issue.

On occasion when I stop the server I get the following error. Restarting Calibre does not resolve this. Reboot is necessary.

----------

calibre, version 7.9.0
ERROR: Unhandled exception: <b>ConnectionResetError</b>:[WinError 10054] An existing connection was forcibly closed by the remote host

calibre 7.9 embedded-python: True
Windows-10-10.0.22631-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.22631')
Python 3.11.5
Windows: ('10', '10.0.22631', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (2, 10, 0) && DeDRM (7, 2, 1) && Package KFX (from KFX Input) (2, 10, 0) && Barnes & Noble (1, 5, 3) && Fantastic Fiction (1, 7, 0) && Find Duplicates (1, 10, 9) && Goodreads (1, 8, 1) && Goodreads Sync (1, 16, 5) && KFX metadata reader (from KFX Input) (2, 10, 0) && From KFX (2, 10, 0) && KFX Input (2, 10, 0) && Set KFX metadata (from KFX Output) (2, 7, 0) && KFX Output (2, 7, 0) && Obok DeDRM (7, 2, 1) && Quality Check (1, 13, 10) && ePub Extended Metadata {Writer} (0, 11, 2) && ePub Extended Metadata {Reader} (0, 11, 2) && ePub Extended Metadata (0, 11, 2)
Traceback (most recent call last):
File "calibre\gui2\actions\device.py", line 243, in toggle_content_server
File "calibre\srv\embedded.py", line 145, in stop
File "calibre\srv\loop.py", line 764, in stop
File "calibre\srv\loop.py", line 694, in wakeup
File "calibre\srv\loop.py", line 688, in write_to_control
ConnectionResetError: [WinError 10054] An existing connection was forcibly closed by the remote host

----------

Thanks

[gbm]

Change the server port defauth is 8080 I use 9095.

bernie

Originally Posted by dchapman

Still struggling with this issue.

On occasion when I stop the server I get the following error. Restarting Calibre does not resolve this. Reboot is necessary.

----------

calibre, version 7.9.0
ERROR: Unhandled exception: <b>ConnectionResetError</b>:[WinError 10054] An existing connection was forcibly closed by the remote host

calibre 7.9 embedded-python: True
Windows-10-10.0.22631-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.22631')
Python 3.11.5
Windows: ('10', '10.0.22631', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (2, 10, 0) && DeDRM (7, 2, 1) && Package KFX (from KFX Input) (2, 10, 0) && Barnes & Noble (1, 5, 3) && Fantastic Fiction (1, 7, 0) && Find Duplicates (1, 10, 9) && Goodreads (1, 8, 1) && Goodreads Sync (1, 16, 5) && KFX metadata reader (from KFX Input) (2, 10, 0) && From KFX (2, 10, 0) && KFX Input (2, 10, 0) && Set KFX metadata (from KFX Output) (2, 7, 0) && KFX Output (2, 7, 0) && Obok DeDRM (7, 2, 1) && Quality Check (1, 13, 10) && ePub Extended Metadata {Writer} (0, 11, 2) && ePub Extended Metadata {Reader} (0, 11, 2) && ePub Extended Metadata (0, 11, 2)
Traceback (most recent call last):
File "calibre\gui2\actions\device.py", line 243, in toggle_content_server
File "calibre\srv\embedded.py", line 145, in stop
File "calibre\srv\loop.py", line 764, in stop
File "calibre\srv\loop.py", line 694, in wakeup
File "calibre\srv\loop.py", line 688, in write_to_control
ConnectionResetError: [WinError 10054] An existing connection was forcibly closed by the remote host

----------

Thanks

[kovidgoyal]

That's some antivirus/security software deciding it doesnt like the content server. The connection it is interrupting is an internal control connection the server uses (a socket pair). This should never fail.

[DNSB]

It could be an issue with the Windows 11 Insider Preview the OP is running. I've seen quite a few odd issues with calibre and Sigil running on my Win11 Insider Preview VM. Though I am wondering what Insider Preview level they are running since 10.0.22631, as far as I know, is a release build not an Insider Preview. Current Beta build would be 22635.3500 while Dev and Canary would be 26100.268. As far as I am aware, the last Beta 22631.2338 build was in Sept., 2023.

I can't get worked up over issues on Insider Preview builds. Well, maybe on the Release Preview channel since that is close to the next public release but any other level from Canary to Dev to Beta is a crapshoot.

OTOH, I run my Insider Preview VM as a vanilla setup. No 3rd party Antivirus, no 3rd party VPN to make it easier to locate the probable cause of a bug.

[dchapman]

Good day.

My apologies. This machine is not running Insider Preview.

--------
C:\Users\dchap>ver

Microsoft Windows [Version 10.0.22631.3527]

C:\Users\dchap>
--------

I'm going to see if i can find a way to make Bitdefender leave Calibre alone.

Thanks,

[dchapman]

Still working on this. Today I restarted Calibre in debug mode and the content server worked fine on local host, the LAN, and from outside. I thought this is promising. I then tried to get the server to work through the Bitdefender VPN. Now I'm back to not functioning at all. :-( VPN on or off no server. I do have a DynDNS account.
Below is the debug log from the most recent debug mode.

----------
Failed to initialize plugin: 'C:\\Users\\dchap\\AppData\\Roaming\\calibre\\plug ins\\Goodreads More Tags.zip'
Traceback (most recent call last):
File "calibre_plugins.goodreads_more_tags.config", line 12, in <module>
ImportError: cannot import name 'Qt' from 'qt' (C:\Program Files\Calibre2\app\bin\python-lib.bypy.frozen\qt\__init__.pyc)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "calibre\customize\ui.py", line 789, in initialize_plugins
File "calibre\customize\ui.py", line 76, in load_plugin
File "calibre\customize\zipplugin.py", line 306, in load
File "importlib\__init__.py", line 126, in import_module
File "<frozen importlib._bootstrap>", line 1204, in _gcd_import
File "<frozen importlib._bootstrap>", line 1176, in _find_and_load
File "<frozen importlib._bootstrap>", line 1147, in _find_and_load_unlocked
File "<frozen importlib._bootstrap>", line 690, in _load_unlocked
File "calibre\customize\zipplugin.py", line 205, in exec_module
File "calibre_plugins.goodreads_more_tags.__init__" , line 12, in <module>
File "calibre\customize\zipplugin.py", line 205, in exec_module
File "calibre_plugins.goodreads_more_tags.config", line 15, in <module>
ModuleNotFoundError: No module named 'PyQt4'
ApplicationPaletteChange event ignored
Using calibre Qt style: True
calibre Debug log
calibre 7.10 embedded-python: True
Windows-10-10.0.22631-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.22631')
Python 3.11.5
Windows: ('10', '10.0.22631', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre-debug.exe
Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (2, 10, 0) && DeDRM (7, 2, 1) && Package KFX (from KFX Input) (2, 10, 0) && Barnes & Noble (1, 5, 5) && Fantastic Fiction (1, 7, 0) && Find Duplicates (1, 10, 9) && KFX metadata reader (from KFX Input) (2, 10, 0) && From KFX (2, 10, 0) && KFX Input (2, 10, 0) && Set KFX metadata (from KFX Output) (2, 7, 0) && KFX Output (2, 7, 0) && Obok DeDRM (7, 2, 1) && Quality Check (1, 13, 10) && ePub Extended Metadata {Writer} (0, 11, 2) && ePub Extended Metadata {Reader} (0, 11, 2) && ePub Extended Metadata (0, 11, 2)
calibre 7.10 embedded-python: True
Windows-10-10.0.22631-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.22631')
Python 3.11.5
Windows: ('10', '10.0.22631', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre-debug.exe
Successfully initialized third party plugins: Gather KFX-ZIP (from KFX Input) (2, 10, 0) && DeDRM (7, 2, 1) && Package KFX (from KFX Input) (2, 10, 0) && Barnes & Noble (1, 5, 5) && Fantastic Fiction (1, 7, 0) && Find Duplicates (1, 10, 9) && KFX metadata reader (from KFX Input) (2, 10, 0) && From KFX (2, 10, 0) && KFX Input (2, 10, 0) && Set KFX metadata (from KFX Output) (2, 7, 0) && KFX Output (2, 7, 0) && Obok DeDRM (7, 2, 1) && Quality Check (1, 13, 10) && ePub Extended Metadata {Writer} (0, 11, 2) && ePub Extended Metadata {Reader} (0, 11, 2) && ePub Extended Metadata (0, 11, 2)
QPA platform: windows
devicePixelRatio: 1.75
logicalDpi: 96.0 x 96.0
physicalDpi: 142.875 x 142.89128205128205
[0.00] Starting up...
[0.01] Showing splash screen...
[0.26] splash screen shown
[0.26] Initializing db...
[0.38] db initialized
[0.38] Constructing main UI...
DEBUG: 0.0 obok::utilities.py - loading translations
DEBUG: 0.0 obok::dialogs.py - loading translations
DEBUG: 0.0 obok::config.py - loading translations
DEBUG: 0.0 obok::action_err.py - loading translations
[1.69] GUI main window shown
[1.91] main UI initialized...
[1.91] Hiding splash screen

----------

Thanks,