Finally! Cybook Firmware upgrade available for download! - Page 7

tompe · 12-25-2009, 01:06 PM

Quote:

Originally Posted by JSWolf

Would you mind taking a photo of this so I can see what you are talking about please?

ProfJulie · 12-25-2009, 01:42 PM

Quote:

Originally Posted by Kaero

One question to anyone with 1.5 software version: Is it still possible to hide headings, status bar, etc., during reading, so only the text of the book is shown? I hate such things, they distract me.

Yes, you can still hide those things.

fiery · 12-25-2009, 03:39 PM

Is there a way to backup the current firmware of my Cybook Opus in case I want to revert to the original system?

Jovvi · 12-25-2009, 04:21 PM

I´m not sure it worked for me, how can you see if the upgrade is sucsessful? I have an Opus from october. What version/build shold the Opus show if the upgrade was sucsessful? Bookeen doen´t say, as far as I can see...

Clara

Crusader · 12-25-2009, 04:22 PM

Quote:

Originally Posted by Jovvi

I´m not sure it worked for me, how can you see if the upgrade is sucsessful? I have an Opus from october. What version/build shold the Opus show if the upgrade was sucsessful? Bookeen doen´t say, as far as I can see...

Clara

Well the install screen shows a message after it is completed and asks for a reboot. If you have a successful install it should show firmware version 2 build 1094 (if I remember correctly).

Jovvi · 12-25-2009, 04:34 PM

Oh right! Now it worked!

Godzil · 12-25-2009, 06:32 PM

1093 for the Mobi version and 1094 for the ePub version

Jozawun · 12-25-2009, 06:33 PM

It simply doesn't install for me. When I press the navigation button, it still just continues on to the library page. I have tried two different cards with the same result. In each card the computer shows the extracted update file.
Has anybody any ideas as to what I am doing wrong?

Godzil · 12-25-2009, 06:47 PM

Does your SD card show up in the library?

Which version of the firmware do you currently have?

fiery · 12-25-2009, 06:55 PM

1. The "Crop Margins" option works very well on my PDFs. I no longer need the PDFEdit application to crop those white margins that waste so much space on my Opus.
2. The bug with the missing SD card on start-up is not fixed, yet. Sometimes it appears, sometimes not.

@JOZAWUN
Try to format your SD in FAT32. Then put the update_kernel file there. Mine was formatted in FAT (FAT16) by default. Bookeen requires that SD card must be in FAT32. Notice that on Windows Vista and 7 you will need some third party utility as Seagate DiscWizard to format your SD card in FAT32. Also, make sure that you hold the center button. In my first attempt I found that I was holding also the right navigation button and it started as usual. Then I put the reader on a desk and with my index finger on the center key it worked fine

Jozawun · 12-25-2009, 07:00 PM

Quote:

Originally Posted by Godzil

Does your SD card show up in the library?

Which version of the firmware do you currently have?

No, all that shows in the library is the E Ink blurb.
I have 1.2 (build 802).

tompe · 12-25-2009, 07:03 PM

Quote:

Originally Posted by JOZAWUN

It simply doesn't install for me. When I press the navigation button, it still just continues on to the library page. I have tried two different cards with the same result. In each card the computer shows the extracted update file.
Has anybody any ideas as to what I am doing wrong?

You have to hold the enter button pressed for 10-20 seconds. It did not work with a couple of seconds as the instruction said.

Jozawun · 12-25-2009, 07:11 PM

Quote:

Originally Posted by fiery

1. The "Crop Margins" option works very well on my PDFs. I no longer need the PDFEdit application to crop those white margins that waste so much space on my Opus.
2. The bug with the missing SD card on start-up is not fixed, yet. Sometimes it appears, sometimes not.

@JOZAWUN
Try to format your SD in FAT32. Then put the update_kernel file there. Mine was formatted in FAT (FAT16) by default. Bookeen requires that SD card must be in FAT32. Notice that on Windows Vista and 7 you will need some third party utility as Seagate DiscWizard to format your SD card in FAT32. Also, make sure that you hold the center button. In my first attempt I found that I was holding also the right navigation button and it started as usual. Then I put the reader on a desk and with my index finger on the center key it worked fine

BINGO; it worked when I put it on the desk and pressed down hard with a cylindrical communication device (or, pencil). Thanks for the suggestion. I wasn't being stupid, just ham-fisted!

Oldtribe · 12-26-2009, 01:36 AM

Quote:

Originally Posted by fiery

Try to format your SD in FAT32.

I had a 1GB SD card formatted as FAT16, and the firmware upgrade worked just nice. No problems at all.

kacir · 12-26-2009, 04:42 AM

Quote:

Originally Posted by JSWolf

Quote:

Originally Posted by mitja_i

· (Bookeen exclusive!) Browsing mode: while reading and also in the “Library”, keep next/prev. page button pressed to enter ultra-fast pagination mode (works on all Cybook hardware).

Yes, if you hold the page turn button down, you will get fast page flipping with the 600 & 700.

He. He. He.
Guess what happens when you keep page forward [or page back] button pressed on the oldest of them all - Sony PRS-500?
It enters the fast page browsing mode ;-)

And I am not doing to describe PocketBook 360 ;-)

12-25-2009, 03:39 PM	#93
fiery Member Posts: 12 Karma: 18 Join Date: Nov 2009 Device: Cybook Opus	Backup current firmware? Is there a way to backup the current firmware of my Cybook Opus in case I want to revert to the original system?

12-25-2009, 06:55 PM	#100
fiery Member Posts: 12 Karma: 18 Join Date: Nov 2009 Device: Cybook Opus	Impressions of the new ePub firmware v2.0 1. The "Crop Margins" option works very well on my PDFs. I no longer need the PDFEdit application to crop those white margins that waste so much space on my Opus. 2. The bug with the missing SD card on start-up is not fixed, yet. Sometimes it appears, sometimes not. @JOZAWUN Try to format your SD in FAT32. Then put the update_kernel file there. Mine was formatted in FAT (FAT16) by default. Bookeen requires that SD card must be in FAT32. Notice that on Windows Vista and 7 you will need some third party utility as Seagate DiscWizard to format your SD card in FAT32. Also, make sure that you hold the center button. In my first attempt I found that I was holding also the right navigation button and it started as usual. Then I put the reader on a desk and with my index finger on the center key it worked fine

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gen3 Old Cybook / upgrade firmware to ePub	AlexBell	Bookeen	8	05-23-2010 07:36 AM
What to expect from new Cybook firmware upgrade	nelsonescorcio	Bookeen	138	03-31-2009 07:29 AM
Cybook Gen3 V1.1 (Build 685) upgrade finally available	DDHarriman	Bookeen	190	06-10-2008 10:28 AM
Bookeen releases Cybook firmware upgrade - and pulls it again	Alexander Turcic	Legacy E-Book Devices	0	12-29-2005 05:54 PM
Cybook firmware upgrade next month	Colin Dunstan	Legacy E-Book Devices	0	02-11-2005 08:51 AM

12-25-2009, 04:21 PM	#94
Jovvi Connoisseur Posts: 56 Karma: 948222 Join Date: Oct 2008 Location: Sweden Device: Cybook Gen3, Cybook Opus, iPad and HTC Wildfire (Android)	I´m not sure it worked for me, how can you see if the upgrade is sucsessful? I have an Opus from october. What version/build shold the Opus show if the upgrade was sucsessful? Bookeen doen´t say, as far as I can see... Clara

12-25-2009, 04:34 PM	#96
Jovvi Connoisseur Posts: 56 Karma: 948222 Join Date: Oct 2008 Location: Sweden Device: Cybook Gen3, Cybook Opus, iPad and HTC Wildfire (Android)	Oh right! Now it worked!

12-25-2009, 06:32 PM	#97
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	1093 for the Mobi version and 1094 for the ePub version

12-25-2009, 06:33 PM	#98
Jozawun Fanatic Posts: 519 Karma: 2693434 Join Date: Dec 2009 Location: Australia Device: Cybook Gen 3, Pocketbook 902, Sony 650	It simply doesn't install for me. When I press the navigation button, it still just continues on to the library page. I have tried two different cards with the same result. In each card the computer shows the extracted update file. Has anybody any ideas as to what I am doing wrong?

12-25-2009, 06:47 PM	#99
Godzil a pthread?? where? where? Posts: 1,763 Karma: 30462 Join Date: Mar 2009 Location: Somewhere in EU Device: Newton MessagePad 2100, and only this	Does your SD card show up in the library? Which version of the firmware do you currently have?

Advert

Advert