Terminal program for PB622/623

[Meistro]

Hi, recently the powerbutton of my Pocketbook touch hd3 has died. I tried all, but the button is dead.
Shutdown i can do by remapping home button or by using the sw menu. Turning on is now only possible by connecting it via usb.
Is there a way to use eg tje home button to power up the device?

That would really help my out to keep using my PB632

Thanks in advance.

[neil_swann80]

Originally Posted by Meistro

Hi, recently the powerbutton of my Pocketbook touch hd3 has died. I tried all, but the button is dead.
Shutdown i can do by remapping home button or by using the sw menu. Turning on is now only possible by connecting it via usb.
Is there a way to use eg tje home button to power up the device?

That would really help my out to keep using my PB632

Thanks in advance.

I do not know of a way to remap the buttons at the firmware level.

I think you'll either need to get the device repaired, or carry around the smallest powerbank you can find to jump-start the ereader!

[Meistro]

Originally Posted by neil_swann80

I do not know of a way to remap the buttons at the firmware level.

I think you'll either need to get the device repaired, or carry around the smallest powerbank you can find to jump-start the ereader!

Thanks for the response Neil, if that's the case that would be unfortunate, but a temporary solution idd.

[nhedgehog]

Hi leomeyer, thanks for that version I bought an Era Colour I couldn't get PBTerm working. Your Allwinner B288 version is running fine on that machine. Nicely done!

Originally Posted by leomeyer

Working pbterm for Verse Pro Color (U634k3.6.8.3806)

Hi, I'm new to this forum (but a long term Pocketbook user, though...)

I have recently received a Verse Pro Color on which pbterm didn't run. After some experimentation I could build a working version. The repository is here:

https://github.com/leomeyer/pbterm

The reason for the crash (or rather, premature exit) was that the call to posix_openpt() failed with error 2 (ENOENT). I fixed it by falling back to using pipes as if the error code was EACCES for which a mechanism had already been implemented.

HTH - Leo

[leomeyer]

You're welcome. Glad that it works for you!