geekmaster formula 42 (the dithermatron demo)

[twobob]

Originally Posted by NiLuJe

@twobob: There's sporadic evidence that Amazon uses scratchbox internally, if you want to go the whole LFS way of things, and not just a X-TC .

(I know, it's fun to point to another project after spending two days making faces at buildroot, no? ).

I personally only need a TC, so crosstool-ng suits me just fine, but YMMV .

Perhaps I should just make draw a line in the sand. But Kek is so shiny... And the friendly voices burbling just on the other side of that much greener looking field are calling to me.

"RTFM Twobob, jump across-compile the fence"

Hopefully the documentation will end before the medication does.

[knc1]

Originally Posted by NiLuJe

I personally only need a TC, so crosstool-ng suits me just fine, but YMMV .

That is covered, see today's copy of the manual.

You can grab the toolchain sources, the pre-built binaries, and the "as-built" pre-configured crosstool-ng build system that generated those binaries from those sources, all in one place.
Then just sit back and pretend you had been the one to run "make".
(or emerge, or bsd-jerk-me, or whatever)

[NiLuJe]

But, but... I *like* running make! I'm using Gentoo, after all .

[knc1]

Originally Posted by NiLuJe

But, but... I *like* running make! I'm using Gentoo, after all .

Oops - some of the files where missing from the resource description appendix. fixed.

[lexai]

Good day
I have a device amazon kindle dx graphite
I use it as a monitor through the VNC (kindlevncviewer)

Can I change the device driver for the fps to be more
In this time approximately 1 fps / per second

files:

/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_shim
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy/eink_fb_shim.ko
license: GPL
author: Lab126
description: eInk Legacy-to-HAL shim
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: show_logo:non-zero to show logo (int)
parm: splash_screen_up:sets which splash screen is currently up (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal_emu
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_emu.ko
license: GPL
author: Lab126
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: emu_bpp:1, 2, 4, or 8 (long)
parm: emu_orientation:0 (portrait) or 1 (landscape) (int)
parm: emu_size:0 (default, 6-inch), 6 (6-inch), or 9 (9.7-inch) (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal.ko
license: GPL
author: Lab126
depends:
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: einkfb_logging:non-zero to enable debugging (long)
parm: einkfb_hw_shutdown_mode:non-zero to fully shut down hardware (int)
parm: einkfb_hw_bringup_mode:non-zero to fully bring up hardware (int)
/lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/legacy$ modinfo eink_fb_hal_broads
filename: /lib/modules/2.6.22.19-lab126/kernel/drivers/video/eink/hal/eink_fb_hal_broads.ko
license: GPL
author: Lab126
depends: eink_fb_hal
vermagic: 2.6.22.19-lab126 preempt mod_unload ARMv6
parm: bs_bootstrap:non-zero to bootstrap (int)
parm: bs_bpp:2, 4, or 8 (long)
parm: bs_orientation:0 (portrait) or 1 (landscape) (int)
parm: bs_upside_down:0 (not upside down) or 1 (upside down) (int)

https://yadi.sk/d/WVIfQczJ3G333r - files *.KO driver

https://yadi.sk/d/eRgmYMw43G33GY - driver source code

[knc1]

Please do not double post.

Answer (as given in reply to your other post): No.