Frequently Asked Questions - Page 47

ThePage · 03-02-2011, 09:22 PM

Quote:

Originally Posted by ThePage

3 of my 5 PDF to rb produced single blank pages and the other 2 didn't convert to imp at all, because the rb's were no good to begin with - they don't open in Calibre.

I therefore converted from PDF to ePUb, making sure that those open, and converted the ePub to rb which are again unreadable - 4 of 5 took less than a minute, and the last is up to 47% at 23 minutes and counting!

Somehow Calibre seems to have gotten the book I was reading confused with last book I'd told it to convert and therby got indigestion!

Started over and it went ok, for that step.

Any file processed by Calibre seems to give my other Library program indigestion however, have tried both (good) RTF & Rb with no useful results in the form of the imp files that my reader uses.

Perkin · 03-03-2011, 07:07 AM

Quote:

Originally Posted by ThePage

Any file processed by Calibre seems to give my other Library program indigestion however, have tried both (good) RTF & Rb with no useful results in the form of the imp files that my reader uses.

Try loading the rtf into wordpad/Atlantis or other editor, then resave it.

library addict · 03-06-2011, 03:22 AM

Help! I’ve somehow caused the whole Search & Replace pane in the conversion window to have a very long horizontal slide bar. And it’s a pain to not have the test button easily clickable on the screen. Maybe it’s just a question of deleting the Search & Replace cache??? I recently had a very long text string I was correcting in a LIT file and I think that’s when the problem started.

I apologize if this has been covered, but I’ve searched and can’t find the answer.

kovidgoyal · 03-06-2011, 10:17 AM

Will be fixed in next release.

Nyssa · 03-06-2011, 03:43 PM

While messing around with some of the options in Calibre one day, I accidentally moved the Book Details to the bottom of the page instead of the right hand side. I then reset everything.
Now, I'd like to have that option back.
Anyone know how I can have the book details open up at the bottom?

T.I.A.

Manichean · 03-06-2011, 04:17 PM

Quote:

Originally Posted by Nyssa

Anyone know how I can have the book details open up at the bottom?

Check the look and feel- options in preferences (the one with the paint pot as icon). You'll want to set the very first option to "narrow" instead of "wide".

Nyssa · 03-06-2011, 05:23 PM

Quote:

Originally Posted by Manichean

Check the look and feel- options in preferences (the one with the paint pot as icon). You'll want to set the very first option to "narrow" instead of "wide".

Yay!!! I looked over the "Look & Feel" options, but never would have equated "Wide vs Narrow" with moving the book details.

Much Karma to you. Thank you!!

M T McGuire · 03-08-2011, 04:02 AM

Hello there, I'm really sorry if this question has been answered already, I have tried to find it but haven't turned up anything so it's likely to be my ignorance of the correct search terms to use...

OK, I want to put a decent epub book up on Goodreads. I have found a number of tutorials as to how but they are mostly from about 1999 so the information seems to be obsolete... it doesn't work and anyway they all finish with my having to use the command prompt and work in dos. Once we reach that level, I am lost and the rest of the project is usually an epic fail.

SO... now I'm trying Calibre. So far I have some pretty decent results converting a short story in word 7 html to an epub file. The only problem is, my cover automatically sizes itself. This means the picture is thin and tall or tiny and fat depending on how I move the edges of the reader. I don't want that to happen when people read my e-book. I want the dimensions of the cover to be locked.

Is there any way I can do that in Calibre? I'm pretty sure I managed it the first time but I haven't found a way to do it since.

I know it's a dunderhead question but if anyone is able to take pity on me and help it would be fantastic. I'm reasonably commonsense savvy about how e-books are structured and what you're supposed to do but I've not really understood how to make one. In short I'm a intelligent but not logical or mathematical so it takes a while to get through to me sometimes.

Cheers

MTM

Manichean · 03-08-2011, 04:42 AM

Quote:

Originally Posted by M T McGuire

I want the dimensions of the cover to be locked.

Is there any way I can do that in Calibre?

Look in the ePub output options in the conversion dialog, there is an option to keep the aspect ratio of the cover.

M T McGuire · 03-08-2011, 10:48 AM

Quote:

Originally Posted by Manichean

Look in the ePub output options in the conversion dialog, there is an option to keep the aspect ratio of the cover.

Doh! Chanelling Homer or what, I had even found the page but I'm working on a notepad computer so all the info was scrolled up under the edge at the top... the thing looked blank, then I saw this slider bar at the side and thought 'hmm'.

I now have a very presentable e-book. I think my quest may have ended!

Cheers

MTM

Manichean · 03-08-2011, 05:33 PM

Moderator Notice
This thread is now closed, because it has devolved from its original purpose to a catch-all thread for general purpose questions. Instead of posting in here, open up a new thread in the appropriate subforum. The thread will of course stay here for archival and research.

03-06-2011, 03:43 PM	#695
Nyssa Series Addict Posts: 6,180 Karma: 167189477 Join Date: Dec 2010 Location: Florida, USA Device: Kindle Paperwhite (2nd Gen)	How Did I Do That? While messing around with some of the options in Calibre one day, I accidentally moved the Book Details to the bottom of the page instead of the right hand side. I then reset everything. Now, I'd like to have that option back. Anyone know how I can have the book details open up at the bottom? T.I.A.

03-08-2011, 04:02 AM	#698
M T McGuire Addict Posts: 231 Karma: 1006970 Join Date: Apr 2010 Location: Bury St Edmunds, Suffolk, England Device: kindle	Hello there, I'm really sorry if this question has been answered already, I have tried to find it but haven't turned up anything so it's likely to be my ignorance of the correct search terms to use... OK, I want to put a decent epub book up on Goodreads. I have found a number of tutorials as to how but they are mostly from about 1999 so the information seems to be obsolete... it doesn't work and anyway they all finish with my having to use the command prompt and work in dos. Once we reach that level, I am lost and the rest of the project is usually an epic fail. SO... now I'm trying Calibre. So far I have some pretty decent results converting a short story in word 7 html to an epub file. The only problem is, my cover automatically sizes itself. This means the picture is thin and tall or tiny and fat depending on how I move the edges of the reader. I don't want that to happen when people read my e-book. I want the dimensions of the cover to be locked. Is there any way I can do that in Calibre? I'm pretty sure I managed it the first time but I haven't found a way to do it since. I know it's a dunderhead question but if anyone is able to take pity on me and help it would be fantastic. I'm reasonably commonsense savvy about how e-books are structured and what you're supposed to do but I've not really understood how to make one. In short I'm a intelligent but not logical or mathematical so it takes a while to get through to me sometimes. Cheers MTM Last edited by M T McGuire; 03-08-2011 at 04:16 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frequently Asked Questions (and answers too!)	Stinger	Kobo Reader	112	05-12-2017 11:40 AM
PRS-300 Reader freezing frequently	paddy77	Sony Reader	15	01-17-2011 02:33 AM
PRS-600 Do you frequently read PDFs on your PRS600?	drmaxx	Sony Reader	20	09-22-2009 07:15 PM
Questions we wish we had asked before buying a Reader	Dr. Drib	Sony Reader	15	05-22-2009 06:13 AM
Three not asked earlier questions about iLiad	Malder1	iRex	9	08-14-2006 02:10 PM

03-06-2011, 03:22 AM	#693
library addict Grand Sorcerer Posts: 13,091 Karma: 37197878 Join Date: Nov 2010 Location: USA Device: Nexus 7 2, Samsung Galaxy Tab A 8" (retired=Sony PRS650, Kobo Mini)	Help! I’ve somehow caused the whole Search & Replace pane in the conversion window to have a very long horizontal slide bar. And it’s a pain to not have the test button easily clickable on the screen. Maybe it’s just a question of deleting the Search & Replace cache??? I recently had a very long text string I was correcting in a LIT file and I think that’s when the problem started. I apologize if this has been covered, but I’ve searched and can’t find the answer.

03-06-2011, 10:17 AM	#694
kovidgoyal creator of calibre Posts: 45,156 Karma: 27110894 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Will be fixed in next release.

03-08-2011, 05:33 PM	#701
Manichean Wizard Posts: 3,130 Karma: 91256 Join Date: Feb 2008 Location: Germany Device: Cybook Gen3	Moderator Notice This thread is now closed, because it has devolved from its original purpose to a catch-all thread for general purpose questions. Instead of posting in here, open up a new thread in the appropriate subforum. The thread will of course stay here for archival and research.

Advert

Advert