Dropped my reader in water - Page 3

Jack Tingle · 12-11-2009, 10:29 AM

All joking aside, there are three issues with water immersion:
1) shorting due to the water - cure: dry it out. Any kind of dessicant is a good aid: silica gel, rice, kitty litter, anything like that which attracts water. Freezing may or may not help, depending on where the water is and what the device contains.
2) deposits due to salts, etc. in the water - If you dunked it into water with some kind of electrolyte (e.g., sea water, urine, etc.) you need to rinse it with demineralized water before drying it out; probably too late now
3) corrosion & swelling of thin internal connections & structures - the above need to be done quickly.

Good Luck,
Jack Tingle

Harry001 · 12-11-2009, 12:41 PM

we are in the good old US of A!
Just go to Sony with your receip, bang the reader on the table and say - it stops working! I did not do anything, it just stops.
you have the waranty - and they will do nothing! The customer is always right and in this bad crisis, no company likes to loose a customer.

just trie it - and if you have to lie --> just do so!
They are lying to us all the time.
Thats my 2 ct

keep reading
harry

emonti8384 · 12-27-2009, 08:37 PM

Okay ladies and gentlemen, I bought a psp charger today (hopefully it was the right one). The one I have is almost like a travel charger I think, it has the thing you plug into the wall and then the cord it comes with has a usb cord on one side (that plugs into the wall charger) and the ac charger port thingy on the other side. Do you think that will work? I put my reader on it 5 minutes ago, and I will keep you updated on what happens. If that's not the right charger for it, or if you think it's not going to work, let me know. Thanks everyone!!!!!

JSWolf · 12-27-2009, 09:37 PM

Quote:

Originally Posted by emonti8384

Okay ladies and gentlemen, I bought a psp charger today (hopefully it was the right one). The one I have is almost like a travel charger I think, it has the thing you plug into the wall and then the cord it comes with has a usb cord on one side (that plugs into the wall charger) and the ac charger port thingy on the other side. Do you think that will work? I put my reader on it 5 minutes ago, and I will keep you updated on what happens. If that's not the right charger for it, or if you think it's not going to work, let me know. Thanks everyone!!!!!

That should work. We have a USB wall wart and I bought a multi-plug USB cord to go with it. One of the plugs is for the PSP and t works fine for charging the 500 and the 505.

emonti8384 · 12-27-2009, 10:20 PM

Well, I am sorry to say that it did not work. Sigh. I put it on the charger and the red light came on but after 30 minutes the red light went off. I tried turning it on while it was still plugged in-nada. I plugged it back in to the computer and it still won't show up anywhere on here. I even put in a memory card to see if nothing else, that would come up. Same thing, it doesn't show up anywhere on my computer.

What should I do now? Send it in to Sony and see what they say? Or do you think I should put it in the flea market and try to sell it? If it cost too much to fix I'm prob just going to end up doing that anyways. I already have my 600, which views pics and plays mp3's, so it's not like I need that part of the reader. If I sell it I'm prob gonna go out and get a 300 for a backup. I'm so sad tho! I still read in the tub, but now I put it in a zip-lock baggie (the good ones) so if I do drop it I won't have this problem. Again.

dreams · 12-28-2009, 02:12 AM

Ouch! I thought for sure it would be working by now.

Have you seen / read / tried the below thread?
https://www.mobileread.com/forums/showthread.php?t=21337

emonti8384 · 12-28-2009, 07:42 AM

Can I do a hard reset even tho nothing shows up on the screen? When I s;ide the power button nothing happens.

dreams · 12-28-2009, 04:59 PM

Quote:

Originally Posted by emonti8384

Can I do a hard reset even tho nothing shows up on the screen? When I s;ide the power button nothing happens.

I looked in the MR Wiki for Sony Portable Reader under Hard Reset and you start with the Reader off. The Wiki 505 page.

This is the download page for specific OS for the 505 on the Sony site. I've never had to use this but if needed it's there.

Sony eSupport for The firmware update did not complete on the Reader. You have to scroll down as there is a lot of white blank space when it comes up.

Well, if the battery is shorted out from trying to turn it on when wet, you can always try opening it up and replacing the battery yourself. Apparently, it is way cheaper than sending it in for Sony repair and replacement.
Sony Reader PRS-505 battery about $34 USD at BatteryShip.com.

MR member igorsk has a disassembly set of photos for the 505 so you can see what is inside and notes about it.

I figure that it can't hurt to try anything and everything. You just never know, something just may work. Also, sometimes I've read that a poster tries something again and it works.

Good Luck

emonti8384 · 12-28-2009, 09:30 PM

Hard Reset
(erases all contents)

If the device is on, slide the "Power" so that it turns off. Look for a small pinhole on the back panel (not the side, that's the charging indicator LED) and press the reset button on the back using a bent paper clip (do not use anything sharp like a pin).
Slide the "Power" button to turn it on. While the screen displays "Starting up ...", you will see the light above the "Power" button flash in yellow. Wait for 35 to 40 seconds, then proceed to hold down the "MARK" and "VOL +" buttons.
(NOTE on the PRS505, do not wait those 35~40 seconds, push and hold the "Mark" and "VOL +" buttons immediately -- the boot window is shorter on 505s)

CONTINUE TO keep these 2 buttons pressed for about 5 to 10 seconds, until the round "PAGE" button makes a quick blue flash.
CONTINUE to keep these 2 buttons pressed for another 25 seconds, the screen will show a "Reset All" message, and ask to delete all content.
Press button '5' to clean up content, this could take several minutes if you have many files on the Reader. When the deletion completes, the Reader will turn off.
Press the "Power" button to turn it on; this could take several minutes if you have many files on the Reader.
Connect your device to your PC and log-in to the store.
Go to Account>Manage Devices – you will be asked if you’d like to authorize this device to your account. Please say yes.
Your device should be ready to read eBooks purchased from your account.

I think this is what ur talking about?

When I push in the reset button and push the power switch I don't get a yellow flash. I tried plugging it into the ac outlet and doing it too-nothing. I don't think it's the battery, the light comes on whenever I plug it in. I have no idea, I'm ready to start crying tho

dreams · 12-28-2009, 11:16 PM

I seem to remember something about 10 resets or something and went looking... I found the below...

I've never had problems with my 505 (knock on wood) but I try to always read problem threads to try and learn. I hope something works for you with the information that I can find..

https://www.mobileread.com/forums/showpost.php?p=706036&postcount=6

From the above post, you may want to try the below part... to just get it on.. I don't know about the modification part.

Quote:

from R0B_IX

Second, when speaking to a Sony rep, he gave this suggestion for resetting the device:
1. Hold the reset button for 20 seconds
2. Press the power switch twice.
I had to do this about three times before it accomplished anything, but eventually the device restarted once and then a yellow light started blinking. The first time it worked, the device was not plugged into the PC, but I have no idea if that's important. At that point, the procedure can be repeated and during the restart, plug the device into the computer. As long as you plug it in before it tries to process media.xml, you will be put into a usb mode and can make the modifications necessary.

emonti8384 · 12-29-2009, 06:51 AM

I have decided to send it to the Sony store and see what they say. Worse comes to worse if it's too expensive to fix I can always sell it for parts

. I will keep everyone updated (hopefully it doesn't take ridiculously long), and thank you all for your advice-it did not go unappreciated!

emonti8384 · 12-30-2009, 09:22 PM

Sent my reader to Texas, hopefully they won't have it for the next 3 months. When they call me to authorize the repairs I will let u know what is wrong with it. Thank you for ur input everyone, ur advice was definitely helpful; too bad it didn't work tho!!!

JSWolf · 12-30-2009, 10:10 PM

Quote:

Originally Posted by emonti8384

Sent my reader to Texas, hopefully they won't have it for the next 3 months. When they call me to authorize the repairs I will let u know what is wrong with it. Thank you for ur input everyone, ur advice was definitely helpful; too bad it didn't work tho!!!

I wish you luck with the repair.

emonti8384 · 01-06-2010, 11:40 PM

Sony has received my reader in Laredo, TX. They sent me an email saying they will keep me updated on the staus of my repair.

dreams · 01-07-2010, 12:21 AM

Quote:

Originally Posted by emonti8384

Sony has received my reader in Laredo, TX. They sent me an email saying they will keep me updated on the staus of my repair.

Yea!

12-28-2009, 07:42 AM	#37
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Can I do a hard reset even tho nothing shows up on the screen? When I s;ide the power button nothing happens. Last edited by emonti8384; 12-28-2009 at 07:45 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just dropped in to say hello	oldtimer	Introduce Yourself	3	10-05-2009 06:14 PM
Dropped reader, now it won't respond!!	RavenT69	Sony Reader	5	08-15-2009 11:54 PM
Dropped Kindle I	dhynesok	Amazon Kindle	15	03-17-2009 12:50 PM
Help! Dropped 505 Reader, Display "wrapped"?	gr8day2b	Sony Reader	7	04-23-2008 10:51 PM
Dropped my iliad	HappyMartin	iRex	6	12-16-2007 07:59 PM

12-11-2009, 10:29 AM	#31
Jack Tingle Punctuation Fetishist Posts: 557 Karma: 1070000 Join Date: Nov 2008 Location: The Bluest Commonwealth In East America Device: Kindle PW, Nexus 7 (2013), Galaxy S5 phone, Galaxy Tab 4 8.0	All joking aside, there are three issues with water immersion: 1) shorting due to the water - cure: dry it out. Any kind of dessicant is a good aid: silica gel, rice, kitty litter, anything like that which attracts water. Freezing may or may not help, depending on where the water is and what the device contains. 2) deposits due to salts, etc. in the water - If you dunked it into water with some kind of electrolyte (e.g., sea water, urine, etc.) you need to rinse it with demineralized water before drying it out; probably too late now 3) corrosion & swelling of thin internal connections & structures - the above need to be done quickly. Good Luck, Jack Tingle

12-11-2009, 12:41 PM	#32
Harry001 Addict Posts: 210 Karma: 729 Join Date: Dec 2008 Location: Tehran/Iran - new posting 2024 Device: Nook glow light 3, 3+ and 4+, Tolino Epos 1, 2 and 3	we are in the good old US of A! Just go to Sony with your receip, bang the reader on the table and say - it stops working! I did not do anything, it just stops. you have the waranty - and they will do nothing! The customer is always right and in this bad crisis, no company likes to loose a customer. just trie it - and if you have to lie --> just do so! They are lying to us all the time. Thats my 2 ct keep reading harry

12-27-2009, 08:37 PM	#33
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Okay ladies and gentlemen, I bought a psp charger today (hopefully it was the right one). The one I have is almost like a travel charger I think, it has the thing you plug into the wall and then the cord it comes with has a usb cord on one side (that plugs into the wall charger) and the ac charger port thingy on the other side. Do you think that will work? I put my reader on it 5 minutes ago, and I will keep you updated on what happens. If that's not the right charger for it, or if you think it's not going to work, let me know. Thanks everyone!!!!!

12-27-2009, 10:20 PM	#35
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Well, I am sorry to say that it did not work. Sigh. I put it on the charger and the red light came on but after 30 minutes the red light went off. I tried turning it on while it was still plugged in-nada. I plugged it back in to the computer and it still won't show up anywhere on here. I even put in a memory card to see if nothing else, that would come up. Same thing, it doesn't show up anywhere on my computer. What should I do now? Send it in to Sony and see what they say? Or do you think I should put it in the flea market and try to sell it? If it cost too much to fix I'm prob just going to end up doing that anyways. I already have my 600, which views pics and plays mp3's, so it's not like I need that part of the reader. If I sell it I'm prob gonna go out and get a 300 for a backup. I'm so sad tho! I still read in the tub, but now I put it in a zip-lock baggie (the good ones) so if I do drop it I won't have this problem. Again.

12-28-2009, 02:12 AM	#36
dreams It's about the umbrella Posts: 25,110 Karma: 56250158 Join Date: Jan 2009 Device: Sony 505\| K Fire \| KK 3G+Wi-Fi \| iPhone 3Gs \|Vista 32-bit Hm Prem w/FF	Ouch! I thought for sure it would be working by now. Have you seen / read / tried the below thread? https://www.mobileread.com/forums/showthread.php?t=21337

12-28-2009, 09:30 PM	#39
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Hard Reset (erases all contents) If the device is on, slide the "Power" so that it turns off. Look for a small pinhole on the back panel (not the side, that's the charging indicator LED) and press the reset button on the back using a bent paper clip (do not use anything sharp like a pin). Slide the "Power" button to turn it on. While the screen displays "Starting up ...", you will see the light above the "Power" button flash in yellow. Wait for 35 to 40 seconds, then proceed to hold down the "MARK" and "VOL +" buttons. (NOTE on the PRS505, do not wait those 35~40 seconds, push and hold the "Mark" and "VOL +" buttons immediately -- the boot window is shorter on 505s) CONTINUE TO keep these 2 buttons pressed for about 5 to 10 seconds, until the round "PAGE" button makes a quick blue flash. CONTINUE to keep these 2 buttons pressed for another 25 seconds, the screen will show a "Reset All" message, and ask to delete all content. Press button '5' to clean up content, this could take several minutes if you have many files on the Reader. When the deletion completes, the Reader will turn off. Press the "Power" button to turn it on; this could take several minutes if you have many files on the Reader. Connect your device to your PC and log-in to the store. Go to Account>Manage Devices – you will be asked if you’d like to authorize this device to your account. Please say yes. Your device should be ready to read eBooks purchased from your account. I think this is what ur talking about? When I push in the reset button and push the power switch I don't get a yellow flash. I tried plugging it into the ac outlet and doing it too-nothing. I don't think it's the battery, the light comes on whenever I plug it in. I have no idea, I'm ready to start crying tho

12-29-2009, 06:51 AM	#41
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	I have decided to send it to the Sony store and see what they say. Worse comes to worse if it's too expensive to fix I can always sell it for parts . I will keep everyone updated (hopefully it doesn't take ridiculously long), and thank you all for your advice-it did not go unappreciated!

12-30-2009, 09:22 PM	#42
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Sent my reader to Texas, hopefully they won't have it for the next 3 months. When they call me to authorize the repairs I will let u know what is wrong with it. Thank you for ur input everyone, ur advice was definitely helpful; too bad it didn't work tho!!!

01-06-2010, 11:40 PM	#44
emonti8384 browneyedgurl Posts: 523 Karma: 356470 Join Date: Dec 2008 Location: Warren, OH Device: PRS-505/950x2, PRS-600 silver, Galaxy III purple, T2 black	Sony has received my reader in Laredo, TX. They sent me an email saying they will keep me updated on the staus of my repair.

Advert

Advert