Can someone help me to downgrade PW2 5.4.2 to 5.4.0? - Page 3

felix158 · 02-03-2015, 10:30 AM

Quote:

Originally Posted by justin916

Code:

#################################################
#  N O T I C E  *  N O T I C E  *  N O T I C E  #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################

I have attached an updated version of the guide I am writing for this, I am on step 14. How do I proceed to backup my current data and copy the partition and kernel files onto the kindle? My instinct is to use the command above to make the kindle writeable and then go to the root directory, but after that I'm stumped.

I had the same NOTICE NOTICE NOTICE message.
I just ignored it. As Step 14. It worked fine (previous message)

Rudeman · 02-12-2015, 08:03 AM

Quote:

Originally Posted by felix158

2/ Step 3 to 5 of the TXT : To install the Rescue Pack, I had to Use KUAL and MR Package Installer (see here : https://www.mobileread.com/forums/sho...d.php?t=251143 )

Sorry, i don't get it... How can you use Kual if you're on 5.1.6? Please help me!

knc1 · 02-12-2015, 08:20 AM

Quote:

Originally Posted by Rudeman

Sorry, i don't get it... How can you use Kual if you're on 5.1.6? Please help me!

(I assume the version number above is a typo.)

KUAL is just a document, put it in your documents folder.
Find it shown on your main screen like any other document.

Your device **must** have been jailbroken **prior to** being updated to the 5.6.x series of firmware.

If the jailbreak that was used was the most recent, then everything that KUAL requires to run was saved across the upgrade.
Also, some of the less recent versions of the jailbreak can be restored by NiLuJe's "hotfix".

Rudeman · 02-12-2015, 08:47 AM

I had a jailbroken Version of 5.4.x But sadly the device made a ota-update to 5.6.1.0.2
When i start KUAL (it worked before the ota-update), there comes a message that "Mobileread Kindlet Kit" is not installed.

Will try the hotfix in the meantime...

Besides, thx for the quick reply!

Rudeman · 02-12-2015, 08:58 AM

Nice, the Hotfix from NiLuJe worked fine for me!
thx knc1 for your help!

ACardAttack · 03-01-2015, 06:00 PM

I'm using justin's guide and I have a couple questions.

When I get to the SSH part, am I just really entering command lines?

Is each line in the the guide a command in itself?

So In step 15
"zcat /mnt/us/mmcblk0p1.bin.gz| dd of=/dev/mmcblk0p1 bs=4096"
is one long command?

And in step 17
rm /mnt/us/ENABLE_DIAGS
idme -d --bootmode main
reboot

Is three different commands?

Also if I downgrade, will I need to rejailbreak and reinstall the file that prevents amazon from autoupdating?

Thanks

knc1 · 03-01-2015, 08:07 PM

Quote:

Originally Posted by ACardAttack

I'm using justin's guide and I have a couple questions.

When I get to the SSH part, am I just really entering command lines?

Is each line in the the guide a command in itself?

So In step 15
"zcat /mnt/us/mmcblk0p1.bin.gz| dd of=/dev/mmcblk0p1 bs=4096"
is one long command?

And in step 17
rm /mnt/us/ENABLE_DIAGS
idme -d --bootmode main
reboot

Is three different commands?

Also if I downgrade, will I need to rejailbreak and reinstall the file that prevents amazon from autoupdating?

Thanks

Yes,
Yes,
Yes and that is a short command, single commands can be 5,000+ characters long,
Yes,
Yes and Yes.

Belenos · 03-02-2015, 12:08 PM

Quote:

Originally Posted by justin916

Sorry, it took me a couple days to circle back around. I reinstalled the rescue pack and confirmed that the progress bar does fill all the way up, then reboots the kindle.

To my surprise the whole thing worked this time and I am in rescue mode. No idea what I did differently but I don't want to turn it off and risk losing it. I am SSHed in but am now stuck on what to do next? I am getting the following message

Code:

#################################################
#  N O T I C E  *  N O T I C E  *  N O T I C E  #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################

I have attached an updated version of the guide I am writing for this, I am on step 14. How do I proceed to backup my current data and copy the partition and kernel files onto the kindle? My instinct is to use the command above to make the kindle writeable and then go to the root directory, but after that I'm stumped.

Thanks for the guide, it worked

ACardAttack · 03-05-2015, 07:59 AM

Quote:

Originally Posted by felix158

3/ Step 11 of the TXT : My "network device" would not install itself automatically (running Windows 8). I followed these instructions for W7. It was almost the same : https://www.mobileread.com/forums/sho...73&postcount=6
4/ Step 14 of the TXT : I didn't know how to backup, so I crossed my fingers and ignored this step.
5/ Step 17 : /mnt/us/ENABLE_DIAGS didn't exist, somehow it was already deleted. I still typed the command, and continued.

Thanks for the step 11 tip, I had the same issue

Same for me on step 14, I forgot to look into it until it might have been too late and I ignored it and ENABLE_DIAGS also didn't exist anymore, I guess installing the firmware wiped it clean

All in all, thanks to everyone here, I got mine running 5.4 and collection manager, so important for managing a large collection of books

Thanks KNC1 for answering my questions. I always like to know what I'm doing when I'm messing around with technology for the first time. I'm competent enough to follow directions and research what I'm doing, but I'm far from an expert.

knc1 · 03-05-2015, 02:51 PM

Quote:

Originally Posted by ACardAttack

- - - -
Thanks KNC1 for answering my questions. I always like to know what I'm doing when I'm messing around with technology for the first time. I'm competent enough to follow directions and research what I'm doing, but I'm far from an expert.

That was easy to do -
you already understood everything, only needed the confirmation.
- - - -
Other times, other posters -
not quite so easy

(Directions? You mean read the file called: README, that those are the directions? Who? Me? etc. {and other "human nature" things}

)

mkeles84 · 06-25-2015, 04:49 PM

My kindle pw2 is now 5.6.2.1.
I tried to copy the rescue bin file to Kindle ( H : ) folder, and follow settings>Update kindle is not active and then I see that rescue bin file was deleted by kindle.
I didn't pass first one.

knc1 · 06-25-2015, 05:30 PM

Quote:

Originally Posted by mkeles84

My kindle pw2 is now 5.6.2.1.
I tried to copy the rescue bin file to Kindle ( H : ) folder, and follow settings>Update kindle is not active and then I see that rescue bin file was deleted by kindle.
I didn't pass first one.

Information please:
* Had it been jail broken before the update to 5.6.2.1?
* Any idea what version of the jail break was on it?

mkeles84 · 06-25-2015, 05:49 PM

Quote:

Originally Posted by knc1

Information please:
* Had it been jail broken before the update to 5.6.2.1?
* Any idea what version of the jail break was on it?

I think, it hadn't been jail broken, my kindle was second hand and I upgraded it as soon as buying. Has it be jail broken before? Any way to downgrade

Thanks for your interest.

eschwartz · 06-25-2015, 05:58 PM

Everything begins with jailbreaking your Kindle.

firmware 5.6.x cannot be jailbroken unless you are comfortable performing the jailbreak over a serial port -- i.e. hardware modding.

You said you upgraded it as soon as you bought it -- bad move.

knc1 · 06-25-2015, 08:40 PM

Quote:

Originally Posted by mkeles84

I think, it hadn't been jail broken, my kindle was second hand and I upgraded it as soon as buying.
- - - -

Some graphic advice:

Spoiler:

02-12-2015, 08:47 AM	#34
Rudeman Junior Member Posts: 3 Karma: 10 Join Date: Jul 2014 Device: Kindle Paperwhite 2	I had a jailbroken Version of 5.4.x But sadly the device made a ota-update to 5.6.1.0.2 When i start KUAL (it worked before the ota-update), there comes a message that "Mobileread Kindlet Kit" is not installed. Will try the hotfix in the meantime... Besides, thx for the quick reply! Last edited by Rudeman; 02-12-2015 at 08:49 AM.

06-25-2015, 04:49 PM	#41
mkeles84 Enthusiast Posts: 45 Karma: 20 Join Date: Apr 2015 Device: Kobo Aura/Glo/Kindle PW2	My kindle pw2 is now 5.6.2.1. I tried to copy the rescue bin file to Kindle ( H : ) folder, and follow settings>Update kindle is not active and then I see that rescue bin file was deleted by kindle. I didn't pass first one. Last edited by mkeles84; 06-25-2015 at 05:15 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which one are you ordering: PW2 wifi or PW2 3G	jocampo	Amazon Kindle	37	08-18-2014 10:48 AM
Downgrade for PW2	brims	Amazon Kindle	24	01-08-2014 11:39 PM
Touch I Want To Downgrade To 1.9.14	MorganM	Kobo Reader	5	08-02-2012 04:15 AM
Downgrade from 1.29 to 1.21	jmseight	iRiver Story	1	04-28-2012 10:58 AM
How to downgrade fv. from 3.1 to 3.0.3	apofview	Kindle Developer's Corner	3	02-12-2011 09:56 AM

02-12-2015, 08:58 AM	#35
Rudeman Junior Member Posts: 3 Karma: 10 Join Date: Jul 2014 Device: Kindle Paperwhite 2	Nice, the Hotfix from NiLuJe worked fine for me! thx knc1 for your help!

03-01-2015, 06:00 PM	#36
ACardAttack Member Posts: 11 Karma: 10 Join Date: Jun 2014 Device: Paperwhite 2	I'm using justin's guide and I have a couple questions. When I get to the SSH part, am I just really entering command lines? Is each line in the the guide a command in itself? So In step 15 "zcat /mnt/us/mmcblk0p1.bin.gz\| dd of=/dev/mmcblk0p1 bs=4096" is one long command? And in step 17 rm /mnt/us/ENABLE_DIAGS idme -d --bootmode main reboot Is three different commands? Also if I downgrade, will I need to rejailbreak and reinstall the file that prevents amazon from autoupdating? Thanks

06-25-2015, 05:58 PM	#44
eschwartz Ex-Helpdesk Junkie Posts: 19,421 Karma: 85400180 Join Date: Nov 2012 Location: The Beaten Path, USA, Roundworld, This Side of Infinity Device: Kindle Touch fw5.3.7 (Wifi only)	Everything begins with jailbreaking your Kindle. firmware 5.6.x cannot be jailbroken unless you are comfortable performing the jailbreak over a serial port -- i.e. hardware modding. You said you upgraded it as soon as you bought it -- bad move.

Advert

Advert