Jinke released update 2.20EN.091124 - Page 2

Nikko73 · 12-04-2009, 12:21 AM

@cbell

You are a genius. Thank you. That was indeed the problem. It now works fine (except that it dosn't reflow).

Cheers,

Nick

cbell · 12-04-2009, 05:01 AM

You're very welcome, Nikko. Glad to be helpful

Reflow-ability is set when the ebook is created.

avysk · 12-06-2009, 06:15 PM

When I try to open some[1] fb2 files, the device either goes to reset or just returns to the filelist menu after some time. I'm very sure[2] that the files are not corrupted so it must be the firmware.

[1] Actually, all of those I've tried, but I didn't try many. I should admit that the files I've tried are quite big, let's say 1Mb+ but so what?

[2] I can reflash previous firmware and read the same files happily.

LARdT · 12-12-2009, 09:40 PM

Quote:

Originally Posted by Siorghlas

I cannot download the firmware from Jinke, and this is a recurrent problem for me. Luckily I have found a mirror here: http://cli.gs/TM73Y

The interesting new feature: ADE (PDF) with 9 zoom levels. Not as good as it could be, but better nevertheless. I'd like a Reflow on/off switch.

I've read some info on a Spanish forum that rtf display is (at least partially) broken.

The mirror belongs to the Spanish site that happens to be my blog:
"Mi reader Papyre 6.1 para libros electrónicos" and I'll be very happy if you visit it.
It is in Spanish but it has a translation to English in the menu.
I'm opening a new thread in this forum that perhaps you may find interesting.

LCF · 02-08-2010, 06:29 PM

Quote:

Originally Posted by Siorghlas

There's something bad in this last firmware: the associated parser for RTF and TXT, instead of being FB2, is the TXT one (much more rustic: ugly “system” font, just 3 Zoom levels, etc.). So for heavy TXT/RTF readers this is a backward step (contrary to PDF/ePUB).

Quote:

Originally Posted by DaleDe

You are correct that LBook offers FB2 as a choice for reading but Jinke does not. It is important to be correct in who offers what or readers can become very confused.

Dale

Very sad. I used 1.27 LBook firmware for over a year until I decided to upgrade so I can read a few PDFs... and now I can't stand the .txt or the .rtf files I have. And I have a lot of them.

Is there any (more or less) official firmware, which includes both PDF reflow and nice, fb2-like .txt and .rtf files?

Dopedangel · 02-09-2010, 04:32 AM

Quote:

Originally Posted by LCF

Very sad. I used 1.27 LBook firmware for over a year until I decided to upgrade so I can read a few PDFs... and now I can't stand the .txt or the .rtf files I have. And I have a lot of them.

Is there any (more or less) official firmware, which includes both PDF reflow and nice, fb2-like .txt and .rtf files?

Try Tirwal's triple boot firmware you can change the reader without flashing so you can use fbreader.

LCF · 02-09-2010, 06:29 AM

I'll give it a shot

LCF · 02-11-2010, 11:45 AM

Well, I tried the Tirwal... And I'm fascinated. Sooo many options, so much to play with.
The initial install used FB2 parser for .txt/.rtf and had pdf reflow just like the Jinke update. I haven't tried the others jet.
Both thumbs up for Tirwal & co.!

12-06-2009, 06:15 PM	#18
avysk Junior Member Posts: 2 Karma: 10 Join Date: Dec 2009 Device: Hanlin V3	fb2 support is mighty broken in 2.20 When I try to open some[1] fb2 files, the device either goes to reset or just returns to the filelist menu after some time. I'm very sure[2] that the files are not corrupted so it must be the firmware. [1] Actually, all of those I've tried, but I didn't try many. I should admit that the files I've tried are quite big, let's say 1Mb+ but so what? [2] I can reflash previous firmware and read the same files happily.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware Update The update has been released!!	cvkemp	Amazon Kindle	3	09-09-2010 10:26 PM
Has the firmware update been released yet?	nursedude	Kobo Reader	42	07-02-2010 02:35 AM
First eDGe Update Just Released!	Batman Jr.	enTourage eDGe	19	04-01-2010 12:52 PM
Hanlin V3 update just released	Nate the great	News	0	11-26-2009 07:37 PM
Firmware Update How often is an update released for K2?	sbell1	Amazon Kindle	2	04-05-2009 01:43 PM

12-04-2009, 12:21 AM	#16
Nikko73 Enthusiast Posts: 34 Karma: 62 Join Date: Feb 2009 Location: Gold Coast, Australia Device: Kobo Aura One (after Hanlin, Sony and other Kobo devices)	@cbell You are a genius. Thank you. That was indeed the problem. It now works fine (except that it dosn't reflow). Cheers, Nick

12-04-2009, 05:01 AM	#17
cbell Frenetic Posts: 590 Karma: 8181 Join Date: Apr 2008 Location: Australia Device: iLiad V2	You're very welcome, Nikko. Glad to be helpful Reflow-ability is set when the ebook is created.

02-09-2010, 06:29 AM	#22
LCF Wizard Posts: 1,472 Karma: 9795311 Join Date: Aug 2008 Location: Germany Device: Hanlin V3 (LBook), GS3	I'll give it a shot

02-11-2010, 11:45 AM	#23
LCF Wizard Posts: 1,472 Karma: 9795311 Join Date: Aug 2008 Location: Germany Device: Hanlin V3 (LBook), GS3	Well, I tried the Tirwal... And I'm fascinated. Sooo many options, so much to play with. The initial install used FB2 parser for .txt/.rtf and had pdf reflow just like the Jinke update. I haven't tried the others jet. Both thumbs up for Tirwal & co.!

Advert

Advert