[Request] Go 6 firmware link.

[ronnie2024]

Thanks. I am a newbie, so I will carefully do that. Could You please share me the recovery file of it. And do I need to root before doing autoupdate?

[Renate]

@ronnie2024

I sent you a link to the recovery in PM. You can rename it rec.img

If you are already rooted you can simply:

C:\>adb push rec.img sdcard
C:\>adb shell
$ su
# dd if=/sdcard/rec.img of=/dev/block/by-name/recovery_a
# dd if=/sdcard/rec.img of=/dev/block/by-name/recovery_b
# reboot recovery

If you are not, then you will probably have to use EDL since fastboot is most non-functional these days. Check my sig, learn about EDL.

C:\>edl /lpoke6.bin
C:\>edl /w /precovery_a rec.img
C:\>edl /w /precovery_b rec.img
C:\>edl /z
C:\>adb reboot recovery

Once you're there, it's time for a little sanity test.

C:\>adb shell
# start autoupdate

Do you see friendly text? Good.

Download the upx from the link above. Use DeBooxUpx to decrypt it. Take update.zip and put it on a flash drive or a micro SD card. Plug/stuff the flash/card into your reader. It should start and run happily, then reboot to new system. It will also overwrite your nice custom recovery. You can go back and write it again or just wait until you need it next time.

[ronnie2024]

Thanks for your detail guide. I did it successful last night on my Poke6.

Do you see friendly text? Good.

Yes, I see the normal text after reboot to recovery and also Autoupdate process in percentage.

[mio-19]

Originally Posted by Renate

Oh, you mean:

Model:  Go6 (English)
Finger: Onyx/Go6/Go6:11/2025-02-11_23-36_v4.0-beta4_a390c414ef/48880:user/release-keys
Link:   http://firmware-us.boox.com/cb6afbde5365d8fc8ab86ab94490aad4/update.upx
Size:   1,752,091,374
MD5:    cb6afbde5365d8fc8ab86ab94490aad4

Now 2025-03-09_14-38_v4.0-rel is released. I will try to get a new link

[Renate]

I'm just seeing February 11.

[vuanh1408]

Originally Posted by Renate

I'm just seeing February 11.

Hi Renate. Im having a Poke 6 running firmware 3.5.4. Could I use the Go6 4.0 beta version link you gave above to update my Poke 6 to Go6
If it's possible, could you kindly sent me the custom rec? Tks alot

[Renate]

So what happened? I thought that I gave you the Go6 custom recovery.

You keep talking of different devices so I'm all confused.

[vuanh1408]

Originally Posted by Renate

So what happened? I thought that I gave you the Go6 custom recovery.

You keep talking of different devices so I'm all confused.

Yeah i got the poke6 rec and it works perfectly. No prolem. Tks a lot

[tanghhz]

Originally Posted by ronnie2024

Hi there, can anyone please help me to install my Chinese Poke6 to international Go6 version

Hi, I'm trying to test poke6 firmware on my Go6, is the poke6 rec img available anywhere?
Did a lot of search but get nothing.

Thanks!

[vuanh1408]

Originally Posted by tanghhz

Hi, I'm trying to test poke6 firmware on my Go6, is the poke6 rec img available anywhere?
Did a lot of search but get nothing.

Thanks!

I used Renate rec of go 6 on poke 6 without problem. I think it works on go6 too

[Renate]

Originally Posted by tanghhz

Hi, I'm trying to test poke6 firmware on my Go6, is the poke6 rec img available anywhere?

You want to turn your international device to Chinese release?
Ok, The Chinese has already gone to 4.

Model:  Poke6 (Chinese)
Finger: Onyx/Poke6/Poke6:11/2025-03-09_12-50_v4.0-rel_5cf49da030/49131:user/release-keys
Link:   http://firmware.boox.com/c04ee94d5bddc60a896ba5db843dbde1/update.upx
Size:   1,727,958,508
MD5:    c04ee94d5bddc60a896ba5db843dbde1

I sent you a link to the Go6 custom recovery.
Use the same procedure as above for Ronnie.

It might be good to use EDL to make a 32 GB backup as going to 4 might cause non-rollback-able changes to userdata.

[tanghhz]

Thanks @vuanh1408 @Renate for the quick update.
I'll definitely try it!

[TuanBC]

Originally Posted by ronnie2024

Hi there, can anyone please help me to install my Chinese Poke6 to international Go6 version

Have you got any success with this? I am having a Poke 6 and am looking for a way to convert it to International version too ^^

[Renate]

Originally Posted by TuanBC

Have you got any success with this?

Yes, of course. I've turned my Go6 from international > Chinese > international.

I guess that my custom recovery is working well enough to generally release.
It's attached it here labelled as zip. But it's not. Just use as is, rename it poke6-recovery.img

As mentioned, it comes up with a white screen. You can connect with ADB and proceed from there.
You can also go to stock recovery (I think) by typing "start recovery".

[vuanh1408]

Originally Posted by Renate

You want to turn your international device to Chinese release?
Ok, The Chinese has already gone to 4.

Model:  Poke6 (Chinese)
Finger: Onyx/Poke6/Poke6:11/2025-03-09_12-50_v4.0-rel_5cf49da030/49131:user/release-keys
Link:   http://firmware.boox.com/c04ee94d5bddc60a896ba5db843dbde1/update.upx
Size:   1,727,958,508
MD5:    c04ee94d5bddc60a896ba5db843dbde1

I sent you a link to the Go6 custom recovery.
Use the same procedure as above for Ronnie.

It might be good to use EDL to make a 32 GB backup as going to 4 might cause non-rollback-able changes to userdata.

Hi i downloaded the Poke 6 firmware and used DeBoox to decrypt it but it didnt work coz there wasnt Poke6 model in BooxKey.csv of deboox. Could you show me how to do it pls?