Firmware 5.10.2 - Page 2

pete330 · 01-14-2019, 10:39 AM

Hello, the Jailbreak on my PW4 survived the update to FW 5.10.2. However, the KUAL booklet build from the NiLuJe Snapshots thread (build: Jan. 3, 2019) only showed a blank screen after starting. I had to follow the instructions & KUAL booklet JAR from this post: https://www.mobileread.com/forums/sh...27&postcount=1 to get KUAL working again.

NiLuJe · 01-14-2019, 12:12 PM

@pete330:

Quote:

Originally Posted by twobob

Q. I'm running on FW >= 5.9.x, and when I tap on KUAL's document, I end up on a blank screen, with just a status bar! I'm forced to hard-reboot my device to get back to my homescreen

.

A. Don't fret, this is a known issue on some devices/FW combos (especially on the KOA2, or the PW4, since they both ship on FW >= 5.9.x). On these devices, instead of the original Booklet version from the latest release/snapshot, you'll want to use @coplate's patched version, a (currently) up to date build of which can be found here, in my Snapshots thread.

NaniBot · 01-16-2019, 03:23 PM

Jailbreak survived the 5.10.2 update on a PW3. For some reason, KUAL didn't work and I had to reinstall it. The screensaver hack was messed up too so I had to uninstall and reinstall it. Works fine now.

Edit : I think the font layout changed along with the new update? Also, it feels a bit faster now(or is it just me?).

knc1 · 01-16-2019, 03:37 PM

Quote:

Originally Posted by NaniBot

Jailbreak survived the 5.10.2 update on a PW3. For some reason, KUAL didn't work and I had to reinstall it. The screensaver hack was messed up too so I had to uninstall and reinstall it. Works fine now.

Edit : I think the font layout changed along with the new update? Also, it feels a bit faster now(or is it just me?).

Gets more than just a bit tiring to keep writing the instructions for people who seem to need a personal copy but your in luck, I am halfway sane today ...

Quote:

Originally Posted by JB instructions

None of our add-ins are protected across updates, you must always re-install them.

NaniBot · 01-16-2019, 03:41 PM

Quote:

Originally Posted by knc1

Gets more than just a bit tiring to keep writing the instructions for people who seem to need a personal copy but your in luck, I am halfway sane today ...

Should've read before posting. Sorry.

ThomasRSB · 01-17-2019, 11:00 AM

Quote:

Originally Posted by NaniBot

Jailbreak survived the 5.10.2 update on a PW3. For some reason, KUAL didn't work and I had to reinstall it. The screensaver hack was messed up too so I had to uninstall and reinstall it. Works fine now.

Edit : I think the font layout changed along with the new update? Also, it feels a bit faster now(or is it just me?).

Hi,

I'm kind of new to this and it seems I can't find my way around- seems that a lot has happened since I jailbreaked my PW2 on 5.4..

I just directly updated to 5.10.2 from 5.4 and it seems that the jailbreak survived. The linkss folder is still on my device.

However, the ScreenSaver Hack is not working anymore.
I tried a bunch of things, like reinstalling the hack and applying the hotfix (1.15n for 5.x), but I'm not sure I do all the steps necessary.

Could you point me in the right direction? How exactly did you get the ScreenSavers working again?

Thanks

knc1 · 01-17-2019, 11:20 AM

Quote:

Originally Posted by knc1

Gets more than just a bit tiring to keep writing the instructions for people who seem to need a personal copy but your in luck, I am halfway sane today ...

click the quote's link

ThomasRSB · 01-17-2019, 11:52 AM

I understand that I have to reinstall stuff, but honestly I don't know how. I tried using the python 0.14 install and uninstall bins as well as the linkss 0.24N install and uninstall bins with my newly updated Paperwhite.

No matter which bin I drag to the root folder, the "Update your Kindle" option stays greyed out. As soon as I replug my Kindle, the file is gone from the root directory.

The hotfix was the only thing I could run via "Update your Kindle".

NiLuJe · 01-17-2019, 11:57 AM

@ThomasRSB: Snapshots. The releases are outdated. You'll need to go through MRPI to install everything except the JB Hotfix.

Read through a few of the JB threads re: FW 5.6.x to catch up, but, short story:

Quote:

Originally Posted by coplate

Hotfix -> MRPI -> KUAL Booklet w/ Coplate's patch -> Everything else

With a bit of leeway on a PW2, because the original unpatched Booklet version of KUAL *might* still work properly (it does on 5.9.7).

ThomasRSB · 01-17-2019, 01:23 PM

Quote:

Originally Posted by NiLuJe

@ThomasRSB: Snapshots. The releases are outdated. You'll need to go through MRPI to install everything except the JB Hotfix.

Read through a few of the JB threads re: FW 5.6.x to catch up, but, short story:

With a bit of leeway on a PW2, because the original unpatched Booklet version of KUAL *might* still work properly (it does on 5.9.7).

It took a while but I managed to get it working again

. Still was more complicated than I thought. Thanks a lot for the directions!

IVressE · 01-18-2019, 05:36 AM

Quote:

Originally Posted by NiLuJe

@ThomasRSB: Snapshots. The releases are outdated. You'll need to go through MRPI to install everything except the JB Hotfix.

Quick question - does the KUAL package located in your snapshot thread include Coplate's patch? I would assume so, but I'd like to know for sure. I tried reading through the changelog but found no mention of this, so maybe I'm wrong or blind.

Bonus (or is it malus?) quick question: basically whenever an update comes, all we need to do is go to the snapshots thread, grab the latest packages (KUAL + awk, Python, SS hack) that are stored there, put them into MRPI and install and we should be home free, right?

NiLuJe · 01-18-2019, 12:26 PM

@IVressE:

The KUAL build listed in the first post of the snapshots thread is a *vanilla* build.
My up-to-date build w/ coplate's patch also happens to live in the Snapshots thread, but in a later, single post. Which is why it's linked to from the KUAL FAQ

.

So, barring KUAL quirks (some devices *will* need the patched KUAL build, others won't), yeah, that's the idea

.

tabascosw · 01-20-2019, 06:00 AM

I just got it done on my PW3. Took a bit more effort than usual. First time I needed the patched KUAL build and I had to use all the newest builds (MR PI, ScreenSaverHack and Python 2.7) from the snapshot thread.

Sol Arkite · 01-20-2019, 11:28 PM

I’m still having power drain and no progress on indexing. I erased the library and dropped a smaller group of books in. Just like before no progress is made in the indexing of the text. Could the jailbreak somehow affect that process?

ilovejedd · 01-20-2019, 11:40 PM

Quote:

Originally Posted by Sol Arkite

I’m still having power drain and no progress on indexing. I erased the library and dropped a smaller group of books in. Just like before no progress is made in the indexing of the text. Could the jailbreak somehow affect that process?

Highly unlikely. You probably have some problematic books.

01-16-2019, 03:23 PM	#18
NaniBot Junior Member Posts: 2 Karma: 10 Join Date: Dec 2016 Location: India Device: Kindle Paperwhite 3	Jailbreak survived the 5.10.2 update on a PW3. For some reason, KUAL didn't work and I had to reinstall it. The screensaver hack was messed up too so I had to uninstall and reinstall it. Works fine now. Edit : I think the font layout changed along with the new update? Also, it feels a bit faster now(or is it just me?). Last edited by NaniBot; 01-16-2019 at 03:29 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Firmware Update Instructions and the latest Firmware Versions	mitchwah	Ectaco jetBook	113	10-24-2023 09:02 PM
Firmware glitch - typing text slow on some firmware+device combinations	mdp	Onyx Boox	11	11-11-2017 12:48 AM
PRS-T1 new firmware available	thomasn75	Sony Reader	58	12-25-2011 12:00 PM
Firmware 2.0.3 Pocketbook IQ - another firmware is release for IQ	tvpupsik	PocketBook	26	12-13-2010 03:03 PM
SMARTQ7: firmware 5 VS .92 firmware 5.1?	wwang	Alternative Devices	2	12-17-2009 12:41 PM

01-14-2019, 10:39 AM	#16
pete330 Connoisseur Posts: 70 Karma: 200233 Join Date: Aug 2013 Device: Kindle Paperwhite	Hello, the Jailbreak on my PW4 survived the update to FW 5.10.2. However, the KUAL booklet build from the NiLuJe Snapshots thread (build: Jan. 3, 2019) only showed a blank screen after starting. I had to follow the instructions & KUAL booklet JAR from this post: https://www.mobileread.com/forums/sh...27&postcount=1 to get KUAL working again.

01-17-2019, 11:52 AM	#23
ThomasRSB Junior Member Posts: 3 Karma: 10 Join Date: Jan 2019 Device: Kindle Paperwhite 2	I understand that I have to reinstall stuff, but honestly I don't know how. I tried using the python 0.14 install and uninstall bins as well as the linkss 0.24N install and uninstall bins with my newly updated Paperwhite. No matter which bin I drag to the root folder, the "Update your Kindle" option stays greyed out. As soon as I replug my Kindle, the file is gone from the root directory. The hotfix was the only thing I could run via "Update your Kindle".

01-18-2019, 12:26 PM	#27
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@IVressE: The KUAL build listed in the first post of the snapshots thread is a vanilla build. My up-to-date build w/ coplate's patch also happens to live in the Snapshots thread, but in a later, single post. Which is why it's linked to from the KUAL FAQ . So, barring KUAL quirks (some devices will need the patched KUAL build, others won't), yeah, that's the idea .

01-20-2019, 06:00 AM	#28
tabascosw Junior Member Posts: 9 Karma: 10 Join Date: Dec 2011 Location: Germany Device: PW3	I just got it done on my PW3. Took a bit more effort than usual. First time I needed the patched KUAL build and I had to use all the newest builds (MR PI, ScreenSaverHack and Python 2.7) from the snapshot thread.

01-20-2019, 11:28 PM	#29
Sol Arkite Zealot Posts: 127 Karma: 30302 Join Date: Oct 2015 Device: KV; PW3 ; PW2 ; k5; KT2	I’m still having power drain and no progress on indexing. I erased the library and dropped a smaller group of books in. Just like before no progress is made in the indexing of the text. Could the jailbreak somehow affect that process?

Advert

Advert