Instructions for patching firmware 4.11.12019 - Page 2

jcn363 · 11-28-2018, 01:58 PM

Quote:

Originally Posted by boriar

@jcn363
Are these new patches "font-size bulk change" the old "nickel-PROGRESIVE" or are a derivated work?

No they are different. These patches only apply on font-size, while Progesive is a sort of re-hash which changes the interface look.
Good luck.

JaBu · 11-28-2018, 02:35 PM

Since this version I don't have real fullscreen reading on my Clara HD anymore. I turned off title and footer in reading settings. They aren't visible since I turned them off but now I have margins in the size of the hidden title and footer.

The line in eReader.config is added correctly. Before I used 4.10.11655 and everything worked fine.

So, what's wrong here? Thanks for help
Jan

(Excuse my poor English - I'm from Germany)

My Clara is patched with these settings (same as with 4.10.11655):
libadobe —

libnickel
My 24 line spacing values yes
Custom left & right margins yes
custom font sizes yes
Freedom to advanced fonts control yes
ePub fixed/adjustable top/bottom margins yes
Custom kepub default margins yes
Set KePub hyphenation yes
Fix three KePub fullScreenReading bugs yes
Enable new homescreen yes
Force user line spacing in KePubs yes
Force user line spacing in ePubs 1 of 2 yes
Force user font-family in ePubs (Part 1 of 2) yes
Always display chapter name on navigation menu yes
Wikipedia Search language yes

librmsdk
Force user line spacing in ePubs 2 of 2 yes
Force user font-family in ePubs (Part 2 of 2) yes

nickel
Custom reading footer style no
Reading stats/Author name cut … yes

geek1011 · 11-28-2018, 02:53 PM

Quote:

Originally Posted by JaBu

Since this version I don't have real fullscreen reading on my Clara HD anymore. I turned off title and footer in reading settings. They aren't visible since I turned them off but now I have margins in the size of the hidden title and footer.

It's nothing to do with the patches. You'll want to remove the line from the config, as full screen reading is now officially supported (since a few versions ago). The only disadvantage with the official one is, as you noticed, there is a small (but not as large as you say you get) additional gap at the top and bottom.

jcn363 · 11-28-2018, 03:00 PM

Quote:

Originally Posted by JaBu

Since this version I don't have real fullscreen reading on my Clara HD anymore. I turned off title and footer in reading settings. They aren't visible since I turned them off but now I have margins in the size of the hidden title and footer.

The line in eReader.config is added correctly. Before I used 4.10.11655 and everything worked fine.

So, what's wrong here?

Nothing at all.
It's a fail in the new firmware. To reduce the footer space you can use something like this.

JaBu · 11-28-2018, 04:23 PM

Thanks! I´ll give it a try. But it seems a little bit of space on top stays free.

jcn363 · 11-28-2018, 05:04 PM

Quote:

Originally Posted by JaBu

Thanks! I´ll give it a try. But it seems a little bit of space on top stays free.

Yes, I still don't achieve...
Good luck.

JaBu · 11-29-2018, 12:22 PM

Thanks for your help. I deleted the string in eReader.config and put the suggested code by jcn363/GeoffR into nickel.yaml.

I'm very happy with the result. The margin is much smaller, nearly as before. I can live with that.

Martina Schein · 12-01-2018, 11:04 AM

Thank you verry much for the patcher, @geek1011 and @jcn363. My two readers (Kobo Aura H2O 2nd Edition, Version and Kobo Aura H2O 1st Edition) work great with the firmware and the patches (I use the progressive version).

thiagoguedes · 12-12-2018, 07:02 PM

Quote:

Originally Posted by Martina Schein

Thank you verry much for the patcher, @geek1011 and @jcn363. My two readers (Kobo Aura H2O 2nd Edition, Version and Kobo Aura H2O 1st Edition) work great with the firmware and the patches (I use the progressive version).

Hi,

Pretty new to Kobo devices - just got mine today. I am currently running 4.10.11655 and was able to push some small patches. From your post I understand that I can manually install this version even if it's not officially supported? I am mainly interested in the "get rid of header" option.

Is there any side effect? Could you please share the details?

Thanks,

Regards,

geek1011 · 12-12-2018, 07:05 PM

Quote:

Originally Posted by thiagoguedes

Hi,

Pretty new to Kobo devices - just got mine today. I am currently running 4.10.11655 and was able to push some small patches. From your post I understand that I can manually install this version even if it's not officially supported? I am mainly interested in the "get rid of header" option.

Is there any side effect? Could you please share the details?

Thanks,

Regards,

Yep. You can manually install this firmware version without side effects. Just install it the same way as any other version. Note that a new version was released today for all devices, but I won't be getting around to the patches till Sunday at the earliest. If you want to stay on this version and not be automatically updated, enable the "Always show confirmation dialog" or "Block wifi firmware upgrade" patch in libnickel.

thiagoguedes · 12-12-2018, 07:19 PM

Quote:

Originally Posted by geek1011

Yep. You can manually install this firmware version without side effects. Just install it the same way as any other version. Note that a new version was released today for all devices, but I won't be getting around to the patches till Sunday at the earliest. If you want to stay on this version and not be automatically updated, enable the "Always show confirmation dialog" or "Block wifi firmware upgrade" patch in libnickel.

Thanks

Is it 4.12.12111? I saw in pgaskin but I was not sure even though it list as compatible for the H2O. I can wait for the next patch, no rush.

Just move .tgz to .kobo and that's it? No risks for kernel drivers or something?

Best,

geek1011 · 12-12-2018, 07:22 PM

Quote:

Originally Posted by thiagoguedes

Thanks

Is it 4.12.12111? I saw in pgaskin but I was not sure even though it list as compatible for the H2O. I can wait for the next patch, no rush.

Just move .tgz to .kobo and that's it? No risks for kernel drivers or something?

Best,

Yep! And that's my site (I'm Patrick Gaskin)

. And yes, no risks.

thiagoguedes · 12-12-2018, 07:34 PM

LOL Ok, thanks Patrick

Fafhrd · 12-17-2018, 03:46 AM

Hello Everybody,
There seems to be firmware updates at the adress https://pgaskin.net/KoboStuff/kobofirmware.html.

davidfor · 12-17-2018, 06:08 AM

Quote:

Originally Posted by Fafhrd

Hello Everybody,
There seems to be firmware updates at the adress https://pgaskin.net/KoboStuff/kobofirmware.html.

There is already a thread to discuss the firmware: https://www.mobileread.com/forums/sh...d.php?t=313381. And another for the patches.

11-28-2018, 02:35 PM	#17
JaBu Member Posts: 19 Karma: 10 Join Date: Jun 2015 Device: Kobo Clara HD, Mini	No fullscreen reading anymore Since this version I don't have real fullscreen reading on my Clara HD anymore. I turned off title and footer in reading settings. They aren't visible since I turned them off but now I have margins in the size of the hidden title and footer. The line in eReader.config is added correctly. Before I used 4.10.11655 and everything worked fine. So, what's wrong here? Thanks for help Jan (Excuse my poor English - I'm from Germany) My Clara is patched with these settings (same as with 4.10.11655): libadobe — libnickel My 24 line spacing values yes Custom left & right margins yes custom font sizes yes Freedom to advanced fonts control yes ePub fixed/adjustable top/bottom margins yes Custom kepub default margins yes Set KePub hyphenation yes Fix three KePub fullScreenReading bugs yes Enable new homescreen yes Force user line spacing in KePubs yes Force user line spacing in ePubs 1 of 2 yes Force user font-family in ePubs (Part 1 of 2) yes Always display chapter name on navigation menu yes Wikipedia Search language yes librmsdk Force user line spacing in ePubs 2 of 2 yes Force user font-family in ePubs (Part 2 of 2) yes nickel Custom reading footer style no Reading stats/Author name cut … yes

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Instructions for patching firmware 3.13.1	GeoffR	Kobo Developer's Corner	56	07-01-2016 09:59 AM
Instructions for patching firmware 3.17.3	GeoffR	Kobo Developer's Corner	60	09-17-2015 05:35 PM
Instructions for patching firmware 3.17.0	GeoffR	Kobo Developer's Corner	49	08-16-2015 05:20 AM
Instructions for patching firmware 3.12.1	GeoffR	Kobo Developer's Corner	56	03-20-2015 05:14 AM
Instructions for patching firmware 3.8.0	GeoffR	Kobo Developer's Corner	92	10-22-2014 07:22 AM

11-28-2018, 04:23 PM	#20
JaBu Member Posts: 19 Karma: 10 Join Date: Jun 2015 Device: Kobo Clara HD, Mini	Thanks! I´ll give it a try. But it seems a little bit of space on top stays free.

11-29-2018, 12:22 PM	#22
JaBu Member Posts: 19 Karma: 10 Join Date: Jun 2015 Device: Kobo Clara HD, Mini	Thanks for your help. I deleted the string in eReader.config and put the suggested code by jcn363/GeoffR into nickel.yaml. I'm very happy with the result. The margin is much smaller, nearly as before. I can live with that.

12-01-2018, 11:04 AM	#23
Martina Schein eBook-Reader-Fan Posts: 175 Karma: 444178 Join Date: Sep 2012 Location: Saarbruecken / DE Device: Kobo Aura H2O 2nd Edition	Thank you verry much for the patcher, @geek1011 and @jcn363. My two readers (Kobo Aura H2O 2nd Edition, Version and Kobo Aura H2O 1st Edition) work great with the firmware and the patches (I use the progressive version).

12-12-2018, 07:34 PM	#28
thiagoguedes Junior Member Posts: 3 Karma: 10 Join Date: Dec 2018 Device: H2OE2V1	LOL Ok, thanks Patrick

12-17-2018, 03:46 AM	#29
Fafhrd Member Posts: 10 Karma: 10 Join Date: Nov 2018 Location: Lyon, France Device: Kobo Glo HD, Kobo Libra 2, Kobo Libra H2O, Kobo Sage	Hello Everybody, There seems to be firmware updates at the adress https://pgaskin.net/KoboStuff/kobofirmware.html.

Advert

Advert