Damaged USB port for KA1. Not taking a charge. - Page 2

Derf · 08-30-2018, 10:05 PM

So what will you do with it? I could probably fix it if it’s just a bad connector.

I’d suggest putting a big white dot of paint on one side of the end of the next microUSB cable so it’s easy for your daughter to identify “up”.

Cootey · 08-31-2018, 05:20 AM

Quote:

Originally Posted by Derf

So what will you do with it? I could probably fix it if it’s just a bad connector.

I’d suggest putting a big white dot of paint on one side of the end of the next microUSB cable so it’s easy for your daughter to identify “up”.

That's very close to what I did. I put stickers on the UP side on every cable she uses for her Kobo. (I bought her an old Kobo Touch for $30 so she has something to use until Christmas.) It's funny that she damaged the port (though I've seen other posts about loose USB ports on KA1s, so perhaps its a factory defect). She had a case on the KA1 and never scratched the screen or scuffed the unit. She was so good with it! So maybe it wasn't really her fault.

As for the broken KA1, I'll probably sell it for parts. I was thinking of creating a topic and asking people what I could expect to get on eBay for a working KA1 with a broken USB port. What would you charge to repair it? It seems that the micro USB component needs to be removed off the motherboard, then replaced.

Derf · 08-31-2018, 04:25 PM

I have a hot air reflow solder station and a digital thermostat micro soldering iron. Send me a PM and I’ll give you my phone number. You can send me some pictures of the port and I’ll look up the cost of a new surface mount port at Digikey just in case. I would only charge you shipping both ways and the cost of a new part if it’s needed.

crankypants · 09-06-2018, 09:18 AM

If the USB port gets bent enough it can disconnect from the circuit board. This happened to me with a power bank. It was easy to fix for me since I know soldering and I fixed a USB A port, but those micro-USB ports are tiny.

stumped · 09-06-2018, 02:52 PM

To get an estimated eBay value for any item , search and filter on condition e.g. spares repairs only then also filter for completed sales only.

Sweetpea · 09-07-2018, 03:21 AM

Quote:

Originally Posted by Cootey

Unfortunately, days after finding her KA1, she complained it wouldn't take a charge. As far as I have been able to determine, no cables will connect. These same cables power my KA1 LE just fine. There is a hairline crack in the case just above the USB port. Since she had stripped the nubs off a USB cable last month, I'm thinking she was struggling to connect the cable into the unit again. I tried to firmware reset the device just in case it was a software issue, but the KA1 died halfway through. ¯\_(ツ)_/¯

https://www.instructables.com/id/Qi-...on-an-ereader/
Isn't this an option for her new reader? No more need to charge the device using a cable, thus less chance of her accidentally breaking it.

frostschutz · 09-07-2018, 03:47 AM

Kinda falls apart at "Step 2: Connect the Receiver to the Ereader Using the Micro-usb Port"

And then the port is blocked, how do you transfer books?

08-30-2018, 10:05 PM	#16
Derf Connoisseur Posts: 99 Karma: 1173714 Join Date: Jul 2018 Location: Long Island, NY Device: Kobo Clara HD / Mac User	Damaged USB port for KA1. Not taking a charge. So what will you do with it? I could probably fix it if it’s just a bad connector. I’d suggest putting a big white dot of paint on one side of the end of the next microUSB cable so it’s easy for your daughter to identify “up”.

09-07-2018, 03:47 AM	#22
frostschutz Linux User Posts: 2,279 Karma: 6123806 Join Date: Sep 2010 Location: Heidelberg, Germany Device: none	Kinda falls apart at "Step 2: Connect the Receiver to the Ereader Using the Micro-usb Port" And then the port is blocked, how do you transfer books? Last edited by frostschutz; 09-07-2018 at 03:52 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB wall charger for KA1	hkckoo	Kobo Reader	8	11-24-2016 06:59 PM
Ended Kobo Glo with damaged USB port	PeterT	Flea Market	12	05-20-2015 04:58 PM
PW1 lost PADs for serial port, but found signals near USB port	uniqdom	Kindle Developer's Corner	1	04-29-2015 08:45 AM
Paperwhite not taking charge	bsekf	Amazon Kindle	7	08-15-2014 09:16 AM
New ST taking forever first charge?	lorraineg57	Barnes & Noble NOOK	3	12-23-2012 01:27 PM

08-31-2018, 04:25 PM	#18
Derf Connoisseur Posts: 99 Karma: 1173714 Join Date: Jul 2018 Location: Long Island, NY Device: Kobo Clara HD / Mac User	I have a hot air reflow solder station and a digital thermostat micro soldering iron. Send me a PM and I’ll give you my phone number. You can send me some pictures of the port and I’ll look up the cost of a new surface mount port at Digikey just in case. I would only charge you shipping both ways and the cost of a new part if it’s needed.

09-06-2018, 09:18 AM	#19
crankypants Hmm. Posts: 124 Karma: 2016606 Join Date: Oct 2015 Device: Android 4.2 Google Play Reader	If the USB port gets bent enough it can disconnect from the circuit board. This happened to me with a power bank. It was easy to fix for me since I know soldering and I fixed a USB A port, but those micro-USB ports are tiny.

09-06-2018, 02:52 PM	#20
stumped Wizard Posts: 3,305 Karma: 10259306 Join Date: May 2016 Device: kobo forma, Kobo Libra, Huawei media Tab, fire HD10, PW3 HDX8.9,	To get an estimated eBay value for any item , search and filter on condition e.g. spares repairs only then also filter for completed sales only.

Advert

Advert