initiate factory reset by script

[barobach_so]

Originally Posted by tshering

Use unix style line endings (LF), instead of Windows style endings (CR+LF). You can select in notepad++ the end of line character (or sequence of charactres).

You can add some lines to the script in order to give you an optical feedback whether the script is executed at all. The led will start blinking.

Spoiler:

#!/bin/sh

echo "ch 3" > /sys/devices/platform/pmic_light.1/lit
echo "cur 1" > /sys/devices/platform/pmic_light.1/lit
echo "bp 5" > /sys/devices/platform/pmic_light.1/lit
echo "dc 5" > /sys/devices/platform/pmic_light.1/lit

PLATFORM=freescale
if [ `dd if=/dev/mmcblk0 bs=512 skip=1024 count=1 | grep -c "HW CONFIG"` == 1 ]; then
  CPU=`ntx_hwconfig -s -p /dev/mmcblk0 CPU`
  PLATFORM=$CPU-ntx
fi

if [ -f "/etc/u-boot/${PLATFORM}/u-boot.recovery" ]; then
  dd if=/etc/u-boot/${PLATFORM}/u-boot.recovery of=/dev/mmcblk0 bs=128k count=1 seek=6
  sync
  reboot
else
  mount -o remount,rw /mnt/sd
  sleep 2
  echo "Cannot find /etc/u-boot/${PLATFORM}/u-boot.recovery" > /mnt/sd/factory_reset.log
  sync
  /bin/busybox poweroff
fi

hi

thank you
Its worked on H2O with your written patch
I asked my friend to use Linux to make script

here is the file for those who don't have Linux