Kindle touch get bricked, Need mmcblk0p1.img - Page 2

hostar · 02-28-2012, 10:20 AM

Quote:

How can I run factory reset in diag mode?

Run usbnet and execute:

Code:

./usr/sbin/factory_reset

If you doesn't have usbnet in diags, add that code to RUNME.sh

wsxhwyy · 02-29-2012, 06:38 AM

Well, I recovered the image and ran factory reset. But it still stuck at boot screen. Any possible reasons?

wsxhwyy · 02-29-2012, 06:39 AM

Or who could give me a detailed instruction about how to unbrick it?

I think that firmware 5.0.0 and 5.0.3 should use different images, or it will stuck.
Is there anyone who can successfully unbrick your kindle with that 5.0.0 image?

Could anyone please provide me a 5.0.3 image?

hostar · 02-29-2012, 07:13 AM

Quote:

Or who could give me a detailed instruction about how to unbrick it?

Maybe your /var/local/ is full.
Try to delete all content from /var/local/
Don't worry, Kindle will recover needed files from this directory automatically after next boot.
So try this, but I can't say, that is exactly your problem, there might be plenty of possible reasons, why Kindle is stuck.

wsxhwyy · 02-29-2012, 07:16 AM

I find that now data.tar.gz don't work!!

Maybe I did something wrong?

hostar · 02-29-2012, 07:20 AM

Quote:

Originally Posted by wsxhwyy

I find that now data.tar.gz don't work!!

Maybe I did something wrong?

Write more details please.

wsxhwyy · 02-29-2012, 07:22 AM

When I rebooted I found that my script is not running. I started usb storage mode in diags, I found that data.tar.gz was not deleted.

hostar · 02-29-2012, 07:29 AM

Quote:

Originally Posted by wsxhwyy

When I rebooted I found that my script is not running. I started usb storage mode in diags, I found that data.tar.gz was not deleted.

I'm afraid it's over my unbricking skills.
Can you somehow connect to usbnet?

wsxhwyy · 02-29-2012, 07:31 AM

Is there some way to connect to usbnet in diags mode without data.tar.gz?

hostar · 02-29-2012, 07:36 AM

If you followed once instructions in this post:
https://www.mobileread.com/forums/sho...4&postcount=38

you should be able to connect to usbnet from diags without any data.tar.gz or RUNME.sh
You just need to put ENABLE_DIAGS to userstore or boot to diag over MfgTool

02-29-2012, 06:39 AM	#18
wsxhwyy Member Posts: 24 Karma: 7124 Join Date: Feb 2012 Device: KT	Or who could give me a detailed instruction about how to unbrick it? I think that firmware 5.0.0 and 5.0.3 should use different images, or it will stuck. Is there anyone who can successfully unbrick your kindle with that 5.0.0 image? Could anyone please provide me a 5.0.3 image? Last edited by wsxhwyy; 02-29-2012 at 07:09 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bricked Kindle Touch	zkat	Kindle Developer's Corner	69	03-07-2012 04:08 PM
bricked Kindle touch. Could someone help,please	captainjack	Kindle Developer's Corner	10	02-08-2012 04:42 PM
Troubleshooting Kindle Touch semi-bricked?	kerotan	Amazon Kindle	3	02-07-2012 12:16 PM
Kindle Touch bricked?	LittleLui	Kindle Developer's Corner	4	12-30-2011 03:18 PM
Bricked kindle 3: rootfs files needed (mmcblk0p1.dmp)	Frenko	Kindle Developer's Corner	4	10-26-2011 06:39 AM

02-29-2012, 06:38 AM	#17
wsxhwyy Member Posts: 24 Karma: 7124 Join Date: Feb 2012 Device: KT	Well, I recovered the image and ran factory reset. But it still stuck at boot screen. Any possible reasons?

02-29-2012, 07:16 AM	#20
wsxhwyy Member Posts: 24 Karma: 7124 Join Date: Feb 2012 Device: KT	I find that now data.tar.gz don't work!! Maybe I did something wrong?

02-29-2012, 07:22 AM	#22
wsxhwyy Member Posts: 24 Karma: 7124 Join Date: Feb 2012 Device: KT	When I rebooted I found that my script is not running. I started usb storage mode in diags, I found that data.tar.gz was not deleted.

02-29-2012, 07:31 AM	#24
wsxhwyy Member Posts: 24 Karma: 7124 Join Date: Feb 2012 Device: KT	Is there some way to connect to usbnet in diags mode without data.tar.gz?

02-29-2012, 07:36 AM	#25
hostar Zealot Posts: 138 Karma: 12324 Join Date: Dec 2011 Location: CZ Device: Kindle 4 non-touch	If you followed once instructions in this post: https://www.mobileread.com/forums/sho...4&postcount=38 you should be able to connect to usbnet from diags without any data.tar.gz or RUNME.sh You just need to put ENABLE_DIAGS to userstore or boot to diag over MfgTool

Advert

Advert