Frequently Asked Questions - Page 17

Anarel · 12-20-2009, 07:29 PM

Hi,

I've been using Calibre to make ebooks, and it was to my delight that for one book, I ran it through Calibre and found when I loaded it onto my Kindle that there were chapter marks! I could actually jump from chapter to chapter.

It didn't work for the last few chapters at the end, but still, I was thrilled.

The only thing is, I can't figure out how I did it in the first place and haven't managed to do it again.

Help please? (Calibre works great btw!)

kovidgoyal · 12-20-2009, 08:56 PM

IIRC it will work if you have the TOC detection options setup correctly for your input document.

Anarel · 12-20-2009, 09:08 PM

Quote:

Originally Posted by kovidgoyal

IIRC it will work if you have the TOC detection options setup correctly for your input document.

Oh... >_< what would be the correct options to set up? I really don't even remember messing with anything TOC related so I have no idea how I did it the first time.

Thanks for the fast reply.

kovidgoyal · 12-20-2009, 09:16 PM

Read the conversion section of the User Manual, that's where this is explained.

Anarel · 12-20-2009, 09:20 PM

Quote:

Originally Posted by kovidgoyal

Read the conversion section of the User Manual, that's where this is explained.

I'm sorry, I thought I looked through the manual well enough, guess I didn't. Thanks again!

jjim · 12-26-2009, 05:38 AM

Can someone help me I got a hanvonn516 reader for xmas,have downloaded Calibre put around a hundred ebooks in the library and connected
the reader to my laptop selected the book I wanted clicked send to reader
up comes no device connected yet reader is showing connected what
have I done wrong????? can anyone guide me through the steps I need an idiots guide as I am not very computer savvy. the manual is in fractured english and no help at all.

Thanks in advance Jim

kovidgoyal · 12-26-2009, 09:29 AM

calibre doesn't have support for the hanvon, see http://calibre-ebook.com/user_manual...pported-in-app

barnacle · 12-27-2009, 04:54 AM

Apologies if this is a repeat, but I can't see the issue anywhere except in the fault tickets on the Calibre page...

The latest version 0.6.30 fails under 32-bit Ubuntu 9.04 - it's complaining about GLIBC_2.10:

Quote:

____________________ WARNING ____________________
Setting up completion failed with error:
__________________________________________________
Traceback (most recent call last):
File "/home/kovid/build/calibre/src/calibre/linux.py", line 172, in setup_completion
File "/home/kovid/build/calibre/src/calibre/ebooks/metadata/cli.py", line 12, in <module>
File "/home/kovid/build/calibre/src/calibre/customize/ui.py", line 12, in <module>
File "/home/kovid/build/calibre/src/calibre/customize/builtins.py", line 393, in <module>
File "/home/kovid/build/calibre/src/calibre/ebooks/pdf/output.py", line 18, in <module>
File "/home/kovid/build/calibre/src/calibre/ebooks/pdf/writer.py", line 22, in <module>
File "ExtensionLoader_PyQt4_QtWebKit.py", line 12, in <module>
ImportError: /lib/tls/i686/cmov/libc.so.6: version `GLIBC_2.10' not found (required by /opt/calibre/libQtNetwork.so.4)

The only available 9.04 Ubuntu package is 0.4.143, and that will crash if an existing library (I previously used 0.6.28) is selected... which is rather a shame as this means the entire library must be recreated. Damn.

0.6.13 is available in 9.10 but - if installed to 9.04 - segfaults on starting.

I shall play with an upgrade to 9.10 and see what happens.

I don't suppose I can persuade Kovid to roll back a version?

Neil

barnacle · 12-27-2009, 10:09 AM

After further investigation... upgrade to Ubuntu 9.10 works with 0.6.30, but it has to be installed from Kovid's site.
There's a version 0.6.13 in the 9.10 repositories, but it won't import (at least) existing .pdb and .lrf files - it has the 'no such function uuid' error discussed elsewhere here.

Thanks,

Neil

kovidgoyal · 12-27-2009, 11:52 AM

Previous versions of calibre are available from sourceforge.net

Just untar them into the /opt/calibre directory (or wherever you chose to install calibre)

barnacle · 12-27-2009, 01:35 PM

Ah, excellent, thanks, Kovid.

Might it be worth a comment to that effect on your download page? And perhaps a link?

(And might I say what a fine program, while I'm at it?)

Neil

kovidgoyal · 12-27-2009, 05:30 PM

There's already a note about it on the linux download page

barnacle · 12-28-2009, 05:55 AM

Thanks! Did that just sneak in or was I blind previously? I'm sure I missed it before...

btw - would simply renaming the current /opt/calibre directory provide an immediate backup in case of a new version biting me? I'm assuming all the pointers and links would be similarly named - is this the case?

Neil

kovidgoyal · 12-28-2009, 10:16 AM

yeah it would

barnacle · 12-29-2009, 06:52 PM

Cheers!

12-20-2009, 07:29 PM	#241
Anarel Evangelist Posts: 424 Karma: 61399 Join Date: Dec 2009 Device: K1, GKDX, K3	Hi, I've been using Calibre to make ebooks, and it was to my delight that for one book, I ran it through Calibre and found when I loaded it onto my Kindle that there were chapter marks! I could actually jump from chapter to chapter. It didn't work for the last few chapters at the end, but still, I was thrilled. The only thing is, I can't figure out how I did it in the first place and haven't managed to do it again. Help please? (Calibre works great btw!) Last edited by Anarel; 12-20-2009 at 07:33 PM.

12-26-2009, 05:38 AM	#246
jjim Junior Member Posts: 5 Karma: 10 Join Date: Dec 2009 Location: aberdeen scotland Device: hanvon n516	Can someone help me I got a hanvonn516 reader for xmas,have downloaded Calibre put around a hundred ebooks in the library and connected the reader to my laptop selected the book I wanted clicked send to reader up comes no device connected yet reader is showing connected what have I done wrong????? can anyone guide me through the steps I need an idiots guide as I am not very computer savvy. the manual is in fractured english and no help at all. Thanks in advance Jim Last edited by jjim; 12-26-2009 at 05:39 AM. Reason: addition

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Frequently Asked Questions (and answers too!)	Stinger	Kobo Reader	112	05-12-2017 11:40 AM
PRS-300 Reader freezing frequently	paddy77	Sony Reader	15	01-17-2011 02:33 AM
PRS-600 Do you frequently read PDFs on your PRS600?	drmaxx	Sony Reader	20	09-22-2009 07:15 PM
Questions we wish we had asked before buying a Reader	Dr. Drib	Sony Reader	15	05-22-2009 06:13 AM
Three not asked earlier questions about iLiad	Malder1	iRex	9	08-14-2006 02:10 PM

12-20-2009, 08:56 PM	#242
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	IIRC it will work if you have the TOC detection options setup correctly for your input document.

12-20-2009, 09:16 PM	#244
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Read the conversion section of the User Manual, that's where this is explained.

12-26-2009, 09:29 AM	#247
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	calibre doesn't have support for the hanvon, see http://calibre-ebook.com/user_manual...pported-in-app

12-27-2009, 10:09 AM	#249
barnacle Enthusiast Posts: 28 Karma: 54 Join Date: Dec 2009 Device: Sony Pocket	After further investigation... upgrade to Ubuntu 9.10 works with 0.6.30, but it has to be installed from Kovid's site. There's a version 0.6.13 in the 9.10 repositories, but it won't import (at least) existing .pdb and .lrf files - it has the 'no such function uuid' error discussed elsewhere here. Thanks, Neil

12-27-2009, 11:52 AM	#250
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Previous versions of calibre are available from sourceforge.net Just untar them into the /opt/calibre directory (or wherever you chose to install calibre)

12-27-2009, 01:35 PM	#251
barnacle Enthusiast Posts: 28 Karma: 54 Join Date: Dec 2009 Device: Sony Pocket	Ah, excellent, thanks, Kovid. Might it be worth a comment to that effect on your download page? And perhaps a link? (And might I say what a fine program, while I'm at it?) Neil

12-27-2009, 05:30 PM	#252
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	There's already a note about it on the linux download page

12-28-2009, 05:55 AM	#253
barnacle Enthusiast Posts: 28 Karma: 54 Join Date: Dec 2009 Device: Sony Pocket	Thanks! Did that just sneak in or was I blind previously? I'm sure I missed it before... btw - would simply renaming the current /opt/calibre directory provide an immediate backup in case of a new version biting me? I'm assuming all the pointers and links would be similarly named - is this the case? Neil

12-28-2009, 10:16 AM	#254
kovidgoyal creator of calibre Posts: 45,378 Karma: 27230406 Join Date: Oct 2006 Location: Mumbai, India Device: Various	yeah it would

12-29-2009, 06:52 PM	#255
barnacle Enthusiast Posts: 28 Karma: 54 Join Date: Dec 2009 Device: Sony Pocket	Cheers!

Advert

Advert