Onyx Boox M92 sample has arrived. First imression - I love it! - Page 16

thomas01155 · 12-28-2011, 09:13 AM

Quote:

Originally Posted by abpos

Got mine for 2 days now. Everything seems to work fine.
But can't get the SD Card(sdhc 16 GB) out of the card slot. Or ist there a trick?
While testing the SD-Card the device froze 1 time, because I tried to get the card out while it was in use.
I had to use a pair of tweezers to get the card out.

Don't get me wrong the sd-card works fine, just want to get it out sometimes.

On the M91S you push it further in and it pings out, you need a bit of nail or something else to push it in. Not sure if its the same on the M92

logrus · 12-28-2011, 11:05 AM

Hi,
I've bought the Boox m92 through ereader-store.de, received device today and I have really serious problem with it. While it seems to work flawlessly when it's on (I've checked the basic features - browsing epub,pdfs,connecting to pc, no crashes/freexes), but the process of switching device on is a disaster! Before it's on I have to do a hard reset a few times by pressing the hole in the back. In most cases it does not respond at all to pressing the power button (yes, I keep it pressed for a few seconds!) or it displays the boot screen (image with two books and e-reader), but the progress bar does not show up.
I'm really annoyed with this issue, and from my point of view its unacceptable to have a 15% chance to switch the reader normally by pressing the power button. Anyone had the same problem? Is it general issue or something is wrong with my particular device and I should immediately send it back?

a.a.k · 12-28-2011, 11:19 AM

Hi guys ..
I have received mine today.. I play with it for bit and I can say that I am happy with it. I tried several files and all were ok. Reading Arabic EUB were only possible after changing the default viewer.
however, I noticed that reading The Economist is not really comfortable on the device...you need to zoom many times to read columns article.. moreover, the device built looks sensitive, so I think you need to be careful with it if you kids around !

apart from this, I am happy with my purchase and I would recommend it to friends

BTW, can anyone tell me where to type the website address in the browser? I could not find it.

Thierry.C · 12-28-2011, 11:46 AM

Hello,

Firstly, I would like to thank everyone here for the efforts to share information, and especially JBaach for his marvelous job, indeed!

I have some questions regarding highlights in PDFs, especially to owners of M92, but I'm also interested in the behaviour on other devices:

Is it possible to keep the highlights visible when a PDF is sent to a computer?
Edit: I guess I discovered that this feature is not supported in M92 by reading another thread. Could you confirm?¹
If yes, do highlights look as if they were made inside a common PDF application (i.e., yellow overlay)?
How do highlights look when they are made on a computer and then sent to the e-reader?
I see in the video that highlights with M92 are dark with light letters (inversion of colours). Is it possible to change their look for a light background, like on the majority of other e-readers?

Thank you very much for your insights!
Thierry
___________
¹ This is somehow "unbelievable" to me: such a basic functionality!

pidgeon92 · 12-28-2011, 12:56 PM

Quote:

Originally Posted by logrus

Hi,
but the process of switching device on is a disaster! Before it's on I have to do a hard reset a few times by pressing the hole in the back. In most cases it does not respond at all to pressing the power button (yes, I keep it pressed for a few seconds!) or it displays the boot screen (image with two books and e-reader), but the progress bar does not show up.

This is exactly what I hate about my M90. I have to plug it in while resetting, or it never turns on.

You didn't mention if you are trying to turn it on, or wake it from sleep. I took someone's suggestion on another thread to actually turn the thing off when I'm done using it, and my M90 is behaving much better now.

ragasol · 12-28-2011, 03:58 PM

Hello:
I have just received mine today. From Germany to Spain in four days. Great, but I have a question for Booxtor.

Where can I find an user manual for the m92?. It is not inside the box (only a quick start guide) and there is not in the internal memory of the device. I have been looking at onyx site, and only can find M90 and M91s manuals...

Thanks

medvedev · 12-28-2011, 05:52 PM

Quote:

Originally Posted by ragasol

Where can I find an user manual for the m92?.

I can't find it either. Maybe it's not written until yet

BTW: I made a picture of my new Boox M92
Onyx Boox M92

Backi · 12-28-2011, 09:04 PM

Quote:

Originally Posted by a.a.k

BTW, can anyone tell me where to type the website address in the browser? I could not find it.

Down right there is a globe symbol. When you click on it, you can type in the URL.
You can add a webiste as bookmark and then you'll see the entry under "Web Sites" alongside Onyx and Wikipedia.

Booxtor · 12-29-2011, 09:51 AM

Quote:

Originally Posted by ragasol

Hello:
I have just received mine today. From Germany to Spain in four days. Great, but I have a question for Booxtor.

Where can I find an user manual for the m92?. It is not inside the box (only a quick start guide) and there is not in the internal memory of the device. I have been looking at onyx site, and only can find M90 and M91s manuals...

Thanks

Hi,

I just got it
ONYX BOOX M92 USER MAUNAL

Happy New Year!

Backi · 12-29-2011, 10:39 AM

Quote:

Originally Posted by Booxtor

Hi,

I just got it
ONYX BOOX M92 USER MAUNAL

Happy New Year!

Thanks! Weird that it states the guide is pre-installed. Also funny that on page 25 the images are in color.

PF4Mobile · 12-29-2011, 11:58 AM

Quote:

Originally Posted by Booxtor

Hi,

I just got it
ONYX BOOX M92 USER MAUNAL

Happy New Year!

this is funy, see the Pictures section, the pictures are shown colour pictures while the reader is e-Ink in grey scales.
Is that wishful thinking? :-))

vsh1ft · 12-29-2011, 02:28 PM

Quote:

Originally Posted by logrus

Hi,
I've bought the Boox m92 through ereader-store.de, received device today and I have really serious problem with it. While it seems to work flawlessly when it's on (I've checked the basic features - browsing epub,pdfs,connecting to pc, no crashes/freexes), but the process of switching device on is a disaster! Before it's on I have to do a hard reset a few times by pressing the hole in the back. In most cases it does not respond at all to pressing the power button (yes, I keep it pressed for a few seconds!) or it displays the boot screen (image with two books and e-reader), but the progress bar does not show up.
I'm really annoyed with this issue, and from my point of view its unacceptable to have a 15% chance to switch the reader normally by pressing the power button. Anyone had the same problem? Is it general issue or something is wrong with my particular device and I should immediately send it back?

I have not experienced any similar problems neither switchin it on nor waking it up from sleep. So far, everything seems to work pretty well

psv · 12-29-2011, 04:46 PM

Overall I am very satisfied with my new M92. So far I found only 2 things that don't work properly:

The pen input is not precise and the "stylus calibration" setting is of no help. Near the top edge the imprecision is ~3mm, which is far too much (it's much more precise at the center and not so bad at the bottom)

The web browser is (so far) almost completely useless; it is painfully slow and I was not able to load any web page besides wikipedia and onyx homepage. It should have some status bar for showing what it's doing, which page it is trying to load (if any); this way it was just desperate waiting with no result. Once I had to reset the device, as it stopped responding.

I hope these are just software problems that will get solved. What is important: the device is perfect for reading, and besides the browser, it is completely stable and fast. I would perhaps like to have more settings, but it's not very important.

Schmitti · 12-29-2011, 04:47 PM

M92 arrived this morning. No issues so far. It's a great device for reading ebooks, as far as I can say. I'm really satisfied atm. The only problems derive from PDFs that were either (a) produced without a professional software (missing/flawed embedded fonts etc.), or (b) had corrupt pages. (The .doc-reader isn't too good, though. Doesn't recognize footnotes.)

ragasol · 12-29-2011, 06:11 PM

Thank you Booxtor:

The device works fine. I have found a couple of bugs, but I think there will be improvements in the future.

RAFA

12-28-2011, 11:05 AM	#227
logrus Junior Member Posts: 3 Karma: 10 Join Date: Dec 2011 Device: Boox M92	Hi, I've bought the Boox m92 through ereader-store.de, received device today and I have really serious problem with it. While it seems to work flawlessly when it's on (I've checked the basic features - browsing epub,pdfs,connecting to pc, no crashes/freexes), but the process of switching device on is a disaster! Before it's on I have to do a hard reset a few times by pressing the hole in the back. In most cases it does not respond at all to pressing the power button (yes, I keep it pressed for a few seconds!) or it displays the boot screen (image with two books and e-reader), but the progress bar does not show up. I'm really annoyed with this issue, and from my point of view its unacceptable to have a 15% chance to switch the reader normally by pressing the power button. Anyone had the same problem? Is it general issue or something is wrong with my particular device and I should immediately send it back? Last edited by logrus; 12-28-2011 at 11:18 AM.

12-28-2011, 11:46 AM	#229
Thierry.C Connoisseur Posts: 52 Karma: 4096 Join Date: Jan 2011 Location: Lausanne (CH) Device: none yet	Highlights Hello, Firstly, I would like to thank everyone here for the efforts to share information, and especially JBaach for his marvelous job, indeed! I have some questions regarding highlights in PDFs, especially to owners of M92, but I'm also interested in the behaviour on other devices: Is it possible to keep the highlights visible when a PDF is sent to a computer? *Edit:* I guess I discovered that this feature is not supported in M92 by reading another thread. Could you confirm?¹ If yes, do highlights look as if they were made inside a common PDF application (i.e., yellow overlay)? How do highlights look when they are made on a computer and then sent to the e-reader? I see in the video that highlights with M92 are dark with light letters (inversion of colours). Is it possible to change their look for a light background, like on the majority of other e-readers? Thank you very much for your insights! Thierry ___________ ¹ This is somehow "unbelievable" to me: such a basic functionality! Last edited by Thierry.C; 12-28-2011 at 12:09 PM.

12-29-2011, 04:46 PM	#238
psv Connoisseur Posts: 70 Karma: 1506158 Join Date: Aug 2010 Device: kobo aura h2o, remarkable	Overall I am very satisfied with my new M92. So far I found only 2 things that don't work properly: The pen input is not precise and the "stylus calibration" setting is of no help. Near the top edge the imprecision is ~3mm, which is far too much (it's much more precise at the center and not so bad at the bottom) The web browser is (so far) almost completely useless; it is painfully slow and I was not able to load any web page besides wikipedia and onyx homepage. It should have some status bar for showing what it's doing, which page it is trying to load (if any); this way it was just desperate waiting with no result. Once I had to reset the device, as it stopped responding. I hope these are just software problems that will get solved. What is important: the device is perfect for reading, and besides the browser, it is completely stable and fast. I would perhaps like to have more settings, but it's not very important. Last edited by psv; 12-29-2011 at 04:54 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Onyx Boox 60 just arrived!	luag	Onyx Boox	116	06-18-2012 10:35 AM
Onyx Boox M92 available in November	hansokumake	Onyx Boox	47	12-20-2011 06:46 AM
ONYX BOOX 1.5.1 A60/X60/X60S(onyx-international.com)	samerghafik	Onyx Boox	4	01-03-2011 02:32 AM
First sample units arrived - review by Friday or Monday!	TadW	Bookeen	169	10-02-2007 02:23 PM

12-28-2011, 11:19 AM	#228
a.a.k Enthusiast Posts: 48 Karma: 10 Join Date: Dec 2011 Location: UK Device: boox M92	Hi guys .. I have received mine today.. I play with it for bit and I can say that I am happy with it. I tried several files and all were ok. Reading Arabic EUB were only possible after changing the default viewer. however, I noticed that reading The Economist is not really comfortable on the device...you need to zoom many times to read columns article.. moreover, the device built looks sensitive, so I think you need to be careful with it if you kids around ! apart from this, I am happy with my purchase and I would recommend it to friends BTW, can anyone tell me where to type the website address in the browser? I could not find it.

12-28-2011, 03:58 PM	#231
ragasol Member Posts: 23 Karma: 10 Join Date: Dec 2011 Location: Málaga Device: onyxboox m92	Hello: I have just received mine today. From Germany to Spain in four days. Great, but I have a question for Booxtor. Where can I find an user manual for the m92?. It is not inside the box (only a quick start guide) and there is not in the internal memory of the device. I have been looking at onyx site, and only can find M90 and M91s manuals... Thanks

12-29-2011, 04:47 PM	#239
Schmitti Enthusiast Posts: 38 Karma: 10 Join Date: Dec 2011 Device: Onyx Boox M92	M92 arrived this morning. No issues so far. It's a great device for reading ebooks, as far as I can say. I'm really satisfied atm. The only problems derive from PDFs that were either (a) produced without a professional software (missing/flawed embedded fonts etc.), or (b) had corrupt pages. (The .doc-reader isn't too good, though. Doesn't recognize footnotes.)

12-29-2011, 06:11 PM	#240
ragasol Member Posts: 23 Karma: 10 Join Date: Dec 2011 Location: Málaga Device: onyxboox m92	Thank you Booxtor: The device works fine. I have found a couple of bugs, but I think there will be improvements in the future. RAFA

Advert

Advert