04-21-2012, 01:57 AM | #181 |
Junior Member
Posts: 1
Karma: 10
Join Date: Apr 2012
Device: Kindle Touch
|
I've done sthing stupid!!!
In "Fastboot mode", I run the command "Eraseall" and now the kindle doesn't respond and stuck in the "Tree Screen", cannot enter "Fastboot mode" anymore. Do you guys have any suggestions? or you can declare my kindle totally bricked.
|
04-21-2012, 04:07 AM | #182 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
I did it! Thank You, actualy I don't remember what I have all done from sugested steps but factory reset from RUNME.sh did the trick.
But, Now I have a new problem. I dont know why, but Wi-Fi on my Kindle touch wifi is not finding any network. What should I do?? Thanks in advance EDIT1: OMG. Content of Documents folder is not shown. There are no books on my kindle and no possible way to add them (as far as I konw) Help me please EDIT2: After Factory reset, kindle user manual started, so I added book I want to read and renamed it as kindle user manual. Now I can read that book so I'm not in a hurry but have not a long term solution. Please help. Last edited by vlamark; 04-21-2012 at 04:12 AM. |
Advert | |
|
04-21-2012, 05:07 AM | #183 | |
Junior Member
Posts: 5
Karma: 10
Join Date: Apr 2012
Device: kindle touch
|
Quote:
a HID complicant device can be found, but neither libusb-win32-bin nor a NIC that should have been introduced by kindle was found ?? |
|
04-21-2012, 08:21 AM | #184 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
"Erase all" means EXACTLY WHAT IT SAYS. You erased EVERYTHING, including the built in u-boot, the built-in fastboot, everything. Rastik did that, and talked about how he recovered with the serial port early on in the kindle touch jailbreak thread. The fastboot readme and various posts say to only do fastboot commands you are told to use. Now you need to connect to the serial port and follow the instructions at the FIRST successful debricking report link in the first post in this thread (how I debricked my kindle with a serial port), except you will need to go deeper than that and do what rastik did as well (also linked in the first post). Last edited by geekmaster; 04-21-2012 at 08:24 AM. |
|
04-21-2012, 11:04 AM | #185 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
One more problem appeared, not that important but...
Also, kindle doesnt show dictionary (that is present on it) So, to summarize, I have kindle main menu, but content of Kindle_Users_Guide.azw is readable until I first time press home taster. Yan Lus launcher is working, WiFi is not and dictionary is not shown but tts is working. Any help? |
Advert | |
|
04-21-2012, 11:40 AM | #186 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
|
|
04-21-2012, 02:17 PM | #187 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
where can I find factory_restore script for k5? link, PM, anything plz (I'm total noob in this, guide step by step would be gr8)
EDIT 1: I've found factory_reset script that helped me from diag menu to get to this state, however am unable to locate factory_restore script. Should I change reset to restore? Or is it some other script? I still have the same problem. Last edited by vlamark; 04-21-2012 at 04:09 PM. |
04-21-2012, 05:22 PM | #188 |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Maybe it was factory_reset. As I recall, cscat provided a RUNME.sh that calls it.
Or you could zero mmcblk0p3 to do a full reset back to initial out-of-the-box condition: dd if=/dev/zero of=/dev/mmcblk0p3 bs=4K count=1K |
04-21-2012, 05:43 PM | #189 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
tried that, no luck. Could You please tell me what image file is good for my kindle touch, so I could try to flash it if possible from RUNME.sh
also command line like one for zeroing mmcblk0p3 would be great. My kindle is touch - wifi (only) with adds EDIT1: is this ok? dd if=/mnt/us/mmcblk0p1-kt-5.0.0.img of=/dev/mmcblk0p1 bs=1024 Should I use mmcblk0p1-kt-5.0.0.img and do i need any more commands? EDIT2: Or this one? #!/bin/sh mntroot rw dd if=/mnt/us/mmcblk0p1-kt-5.0.0.img of=/dev/mmcblk0p1 bs=1024 mntroot ro Last edited by vlamark; 04-21-2012 at 06:07 PM. |
04-21-2012, 06:15 PM | #190 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
For that 5.0.0 main partition, you might also need to flash a 5.0.0 main kernel image, using fastboot. It is best to have a matching kernel and partition image. |
|
04-21-2012, 06:41 PM | #191 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
|
|
04-21-2012, 06:43 PM | #192 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
Since Last post I've been reading fastboot manifesto thread over and over and over again, then same thing in this thread and am simply not sure about anything.
I'm windows 7 user. Have downloaded fastboot_win_public, it missed libusb0.dll so I downloaded it too. However I dont know what to do with it. I've learned to use MfgTool to enter diag, normal or fastboot mode but dont know what to do with fastboot windows program. When I start it it just fills DOS screen with 2 pages of commands wich I don't know how to use. So, I'm probably stupid for this, and am desperate. I've bought kindle to read books, and just wanted to change fonts... One thing leaded to another and now I don't know what to do. Please, please, help me. Guide me by hand I have no technical knowlege and am not so good with english. And thank You in advance EDIT2: I belive I've understood how to use fastboot. So, now main question remains one from EDIT1 EDIT1: I've found only 5.0.1 mmbclk0p2_ssh.img and 5.0.0 without ssh wich one to use? Last edited by vlamark; 04-21-2012 at 07:20 PM. |
04-21-2012, 07:24 PM | #193 | |
Carpe diem, c'est la vie.
Posts: 6,433
Karma: 10773668
Join Date: Nov 2011
Location: Multiverse 6627A
Device: K1 to PW3
|
Quote:
The p2 image WITH ssh gives you SSH access in diags. Use it. |
|
04-21-2012, 08:56 PM | #194 |
Junior Senior Member
Posts: 18
Karma: 10
Join Date: Aug 2010
Location: Serbia, Šabac
Device: K2 & K5
|
I did it. Didn't install kernel but have upgraded official fw after. THANK YOU
Last edited by vlamark; 04-21-2012 at 09:03 PM. |
04-21-2012, 09:22 PM | #195 |
Member
Posts: 14
Karma: 28
Join Date: Feb 2012
Device: Kindle Touch, Nook Color
|
Re: simple kindle touch (and k4nt) debricking method
Hello all,
I've been trying to get my KT back to normal since I bricked it installing KTRotate_0.2 with 5.1.0. I've done a few hundred variations to the steps here and from the Select Boot thread. And at some point, without explicitly deleting any folders, the only folders in my /mnt/us after a factory_reset are: diagnostic_logs documents system (grayed out) tts What are the other folders that a factory_reset should come back with? audible? music? Also, when I set the MfgTool to "Kindle main" from "Kindle diag", and Restart the KT from the KT menu itself, it gets stuck at the screen "Please wait a moment while your Kindle starts up" I have to then stop the "Kindle main" mode and go back to the "Kindle diag" mode (Button sequence: Off->Magic->OffRelease->MagicRelease). And then, I have to go back to the "Kindle main", and Reboot to get back to the KT, which is now unstable and goes after a while into the screensaver "Please wait a moment while your Kindle starts up" I have a feeling that I hosed mine up pretty bad, and don't mind experimenting with it if anyone have suggestions. Plus even after factory_reset, I only show 3,044Mb free when it should be about 4000Mb. My factory_reset always go back to 5.0.4, and not 5.0.0, even when I try to Code:
#!/bin/sh mntroot rw dd if=/mnt/us/mmcblk0p1-kt-5.0.0.img of=/dev/mmcblk0p1 bs=4K mntroot ro Thanks. |
Tags |
debricking |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Which one Nook simple touch or Kobo mini? | capuchino71 | Which one should I buy? | 18 | 07-12-2013 05:09 PM |
Sell Kindle Keyboard 3G, Nook Simple Touch | austinmitchell | Flea Market | 5 | 03-01-2013 11:34 AM |
I have some questions about K4 touch debricking | drjonvargas | Kindle Developer's Corner | 4 | 04-22-2012 03:46 PM |
kindle touch simple debricking for help | non_fox | Amazon Kindle | 4 | 04-18-2012 08:32 PM |
Troubleshooting simple kindle touch (and k4nt) debricking method | geekmaster | Amazon Kindle | 0 | 03-02-2012 10:31 PM |