KUAL: Kindle Unified Application Launcher (v2.7) - Page 104

knc1 · 06-04-2016, 05:59 PM

The developer certificate was over-written by the Amazon update -
For some reason - the components of the "hotfix" package **should** have re-installed it.
(**IF** you ran the hotfix package during jailbreaking).

At the worse - you might have had to re-boot the device after the update.

Without the auto-reinstall of the developer certificate - selecting 'reset' wiped the components from the hotfix package.

You are now back to stock.

Serial port jailbreak or sell this one as stock and buy another (Amazon is still shipping PW-3s with earlier than 5.6.5 firmware).

NiLuJe · 06-05-2016, 08:33 AM

@sk8terek: Wait, 5.7.5.1?

Gah. Will update the hotfix and keep you posted.

EDIT: No such thing available on Amazon's software update page. Double-check your FW version, double-check your exact Kindle model, make sure you have the very latest JB hotfix package, and report back.

NiLuJe · 06-05-2016, 08:39 AM

Quote:

Originally Posted by sk8terek

When I copy Update_jailbreak_bridge_1.14.N_install.bin, which I used on 5.6.5, and eject the device, an "Update Error" pops out saying "An invalid update file has been loaded on your device..." The UYT option is grayed out as well...

There. Ditch that one, and download an up to date hotfix package instead.

sk8terek · 06-05-2016, 09:41 AM

@NiLuJe

My bad, it's 5.7.4.1 (2937220006) actually. Serial number starts from G090G1

The sequence was as follows:

just-bought Kindle PW3 with 5.6.5 firmware -> JB -> JB hotfix (Update_jailbreak_bridge_1.14.N_install.bin) -> KUAL and add-ons -> update to 5.7.4.1 -> factory reset

batpuppy · 06-05-2016, 10:58 AM

I am fairly sure that a factory reset will wipe out the jailbreak. So guess you get to do the serial port jailbreak.

knc1 · 06-05-2016, 01:25 PM

Quote:

Originally Posted by sk8terek

@NiLuJe

My bad, it's 5.7.4.1 (2937220006) actually. Serial number starts from G090G1

The sequence was as follows:

just-bought Kindle PW3 with 5.6.5 firmware -> JB -> JB hotfix (Update_jailbreak_bridge_1.14.N_install.bin) -> KUAL and add-ons -> update to 5.7.4.1 -> factory reset

The update to 5.7.4.1 wiped the developer's signature certificate.
But the update should have ended with a device re-boot.
That re-boot would have restored the developer's signature certificate.
Then the reset wiped the self-reinstall code, but at this point, the certificate file had already been re-installed.

The device is at the same point it was when you had done the first step of the software jail break -
So now do the second step (again) - apply the 'hotfix' package (NOT MKK, the HOTFIX package).

Same-same instruction you have been given at least twice in the above posts.

Ruskie_it · 06-06-2016, 01:51 AM

Quote:

Originally Posted by sk8terek

Unfortunately I've accidentaly performed a factory reset and [...]

This is something I read from time to time, and surprisingly much more often than I thought possible...
How is it possible that someone accidentally performs a factory reset??? It is not something that can happen with the slip of a finger over the wrong button, is it? So how can so many people do that accidentally?

knc1 · 06-06-2016, 08:19 AM

Quote:

Originally Posted by Ruskie_it

This is something I read from time to time, and surprisingly much more often than I thought possible...
How is it possible that someone accidentally performs a factory reset??? It is not something that can happen with the slip of a finger over the wrong button, is it? So how can so many people do that accidentally?

Yes, it is.
'Reset' and 'Restart' are adjacent menu choices on the setting dropdown menu.

A little bit of finger shake, a slightly too sensitive touch screen and approaching 'Restart' from the 'Reset' side of the menu ...

Yup - all to easy - people should stick with holding the power button pressed and picking 'Restart' from that pop-up panel.
But the IG (instant gratification) generation has trouble "wasting" the 7 seconds it takes for the pop-up panel to appear.

NiLuJe · 06-06-2016, 12:17 PM

I personally always enable Parental Control *just* to disable that pesky "Reset" entry.

sk8terek · 06-06-2016, 02:23 PM

@NiLuJe @knc1

I put hotfix .bin file (JailBreak-1.14.N-FW-5.x-hotfix.zip attached to THIS post, then extracted) but after I eject the device I get the update error.

I don't exactly remember applying the hotfix after jaibreaking on 5.6.5 (but I see a hotfix file in my kindle-stuff folder that was created on the same day I performed JB so I'm pretty sure i did so; I updated my device several days ago). Let's suppose I did not apply that. What then? Serial JB?

knc1 · 06-06-2016, 04:14 PM

Serial jail break.

If it had been installed, you would have seen an on-screen message about the jail break being re-installed during the re-boot after the Amazon update.

= = = =

We are trying to tell the difference between:
*) Message was there, but you didn't notice it
*) Message was not there.

I am betting on #2 right now.

Ruskie_it · 06-07-2016, 05:20 AM

Quote:

Originally Posted by knc1

Yes, it is.
'Reset' and 'Restart' are adjacent menu choices on the setting dropdown menu.

A little bit of finger shake, a slightly too sensitive touch screen and approaching 'Restart' from the 'Reset' side of the menu ...

You mean it just resets not even asking the classic "are you sure you want to reset?" questions???

Quote:

Yup - all to easy - people should stick with holding the power button pressed and picking 'Restart' from that pop-up panel.
But the IG (instant gratification) generation has trouble "wasting" the 7 seconds it takes for the pop-up panel to appear.

That's what I do in the rare cases I want to restart... Sad to hear I am old gen.

However, I must say the old-gen way it's also more comfortable than tapping 5 times different zones of the screen to make it restart. I just tried. And how much of those 7 seconds you save? I'd say 2 at most...

knc1 · 06-07-2016, 08:48 AM

Plus -
It gives you those 7 seconds with your finger on the button to reconsider what you are doing.
I like that.

I also did not know about what NiLuJe recommends -
that enabling parental controls disables the 'reset' menu entry.

encol · 06-07-2016, 09:55 AM

I usually restart by launching a "reboot" in the ssh wifi console

NiLuJe · 06-11-2016, 09:47 AM

@sk8terek: Assuming you don't have an exotic PW3 variant (check the wiki), in which case the hotfix install would have failed the first time around, too; then yeah, you're screwed.

@knc1: Yeah, once enabled, the parental controls are fine-grained enough to be able to disable just that without messing with the rest of the system

. And if you ever forget the password, it's trivial to kill over SSH anyway

.

06-05-2016, 08:33 AM	#1547
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@sk8terek: Wait, 5.7.5.1? Gah. Will update the hotfix and keep you posted. EDIT: No such thing available on Amazon's software update page. Double-check your FW version, double-check your exact Kindle model, make sure you have the very latest JB hotfix package, and report back. Last edited by NiLuJe; 06-05-2016 at 08:38 AM.

06-05-2016, 09:41 AM	#1549
sk8terek Member Posts: 16 Karma: 10 Join Date: Dec 2012 Location: Warsaw, Poland Device: PW3	@NiLuJe My bad, it's 5.7.4.1 (2937220006) actually. Serial number starts from G090G1 The sequence was as follows: just-bought Kindle PW3 with 5.6.5 firmware -> JB -> JB hotfix (Update_jailbreak_bridge_1.14.N_install.bin) -> KUAL and add-ons -> update to 5.7.4.1 -> factory reset Last edited by sk8terek; 06-05-2016 at 09:52 AM.

06-06-2016, 02:23 PM	#1555
sk8terek Member Posts: 16 Karma: 10 Join Date: Dec 2012 Location: Warsaw, Poland Device: PW3	@NiLuJe @knc1 I put hotfix .bin file (JailBreak-1.14.N-FW-5.x-hotfix.zip attached to THIS post, then extracted) but after I eject the device I get the update error. I don't exactly remember applying the hotfix after jaibreaking on 5.6.5 (but I see a hotfix file in my kindle-stuff folder that was created on the same day I performed JB so I'm pretty sure i did so; I updated my device several days ago). Let's suppose I did not apply that. What then? Serial JB? Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Launcher icon for KUAL?	Aeris	Kindle Developer's Corner	32	04-01-2021 07:57 PM
kite: kindle 3 application launcher	fbdev	Kindle Developer's Corner	86	10-18-2017 10:19 AM
[KUAL]Kindle reflective screen loader	icantbebothered	Kindle Developer's Corner	26	10-27-2013 09:08 AM
Kual shortcut for hidden image viewer (Kindle Touch & PW)	Aeris	Kindle Developer's Corner	0	10-12-2013 05:09 AM
application launcher for kindle 3 (kite)	fbdev	Kindle Developer's Corner	21	05-04-2012 06:02 PM

06-04-2016, 05:59 PM	#1546
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	The developer certificate was over-written by the Amazon update - For some reason - the components of the "hotfix" package should have re-installed it. (IF you ran the hotfix package during jailbreaking). At the worse - you might have had to re-boot the device after the update. Without the auto-reinstall of the developer certificate - selecting 'reset' wiped the components from the hotfix package. You are now back to stock. Serial port jailbreak or sell this one as stock and buy another (Amazon is still shipping PW-3s with earlier than 5.6.5 firmware).

06-05-2016, 10:58 AM	#1550
batpuppy Connoisseur Posts: 80 Karma: 769050 Join Date: Jul 2007 Device: Kindle PW3 , Samsung TabA 8.0, Kindle fire 7.0	I am fairly sure that a factory reset will wipe out the jailbreak. So guess you get to do the serial port jailbreak.

06-06-2016, 12:17 PM	#1554
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	I personally always enable Parental Control just to disable that pesky "Reset" entry.

06-06-2016, 04:14 PM	#1556
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Serial jail break. If it had been installed, you would have seen an on-screen message about the jail break being re-installed during the re-boot after the Amazon update. = = = = We are trying to tell the difference between: ) Message was there, but you didn't notice it ) Message was not there. I am betting on #2 right now.

06-07-2016, 08:48 AM	#1558
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	Plus - It gives you those 7 seconds with your finger on the button to reconsider what you are doing. I like that. I also did not know about what NiLuJe recommends - that enabling parental controls disables the 'reset' menu entry.

06-07-2016, 09:55 AM	#1559
encol Evangelist Posts: 416 Karma: 765432 Join Date: Apr 2016 Location: Italy Device: Kindle PW3 5.8.5.0.1	I usually restart by launching a "reboot" in the ssh wifi console

06-11-2016, 09:47 AM	#1560
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@sk8terek: Assuming you don't have an exotic PW3 variant (check the wiki), in which case the hotfix install would have failed the first time around, too; then yeah, you're screwed. @knc1: Yeah, once enabled, the parental controls are fine-grained enough to be able to disable just that without messing with the rest of the system . And if you ever forget the password, it's trivial to kill over SSH anyway .

Advert

Advert