PW2 [Wanted] katadelos popcorn_windows.zip for PW2 MEGREZ (i.MX6SL)

[nik1982]

Hi everyone,

I'm looking for the original katadelos popcorn_windows.zip for Kindle Paperwhite 2, hardware codename MEGREZ (i.MX6SL, DP75SDI).

Current situation:
- The board can enter SDP mode correctly, VID=15A2 PID=0063
- imx_usb-loader can upload payload and jump successfully
- But the payload I have is wrong: after jump, it enumerates as "Lab126 USB Charger" briefly then drops off, no mass storage USB gadget (gadget init fails, wrong device tree)
- The UART debug pads on my board are physically damaged, so I cannot use serial console to debug or run `ums` command
- I already have the factory raw eMMC image for PW2 MEGREZ, only need the correct Popcorn payload.

If anyone has a backup of the original katadelos popcorn_windows.zip for MEGREZ, please PM me here.

Thank you very much!