[Help] problem installing OpenInkpot 0.3

Lunanne · 06-15-2012, 03:30 AM

Hi

(warning: possibly a dumb question)
I tried installing OpenInkpot 0.3 on my Bebook/hanlin v3 but I ran into a problem.
I'm following the installation guide and I'm at

Quote:

Follow the instructions on screen.

So it asks me whether I want to update. I click on "ok". After that I get a numbered list(slowly) and a progress bar at the bottom of the screen

Quote:

1. update kernel
2. update system
....
5. update resources

At this point the device seems to freeze, the led is orange. I have tried to select one of the options but none of the buttons respond. I've tried to just do nothing, thinking that maybe it was doing something that took a long time, but nothing happens.

Am I supposed to select something? If so how? Or what is going wrong?

lunohod · 06-15-2012, 04:59 AM

Just reboot it and it should work. Flash again if it doesn't work.

Btw, where did you download 0.3? You'd better try to install 0.2.2 (http://openinkpot.org/pub/releases/0.2.2/) or even the daily snapshot (http://openinkpot.org/pub/daily/)
If your Bebook has got 512Mb flash, you should use v3ext firmware.

Lunanne · 06-15-2012, 05:03 AM

I tried v0.2.2 with the same problem and then I figured I could try the shiny daily build :P

I think the flash size is a problem, I had only looked at the pictures

I'll try v3ext when I get home. Thanks for the help.

lunohod · 06-15-2012, 06:36 AM

Maybe you should format your sd card with some kind of hdd low level format tool. It really solves most of the update issues on hanlin devices.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem installing 0.7.45	davtay	Calibre	22	02-15-2011 07:30 PM
Installing 0.7.42 problem	castlekeep	Calibre	4	01-23-2011 06:21 AM
Hanvon N516 trouble installing OpenInkpot	overflo	OpenInkpot	14	07-19-2010 09:01 PM
Problem building openinkpot on Ubuntu 9.04	nseger	OpenInkpot	3	08-23-2009 04:51 AM
Problem installing driver	zander_nyrond	Calibre	11	08-02-2008 05:18 PM

06-15-2012, 04:59 AM	#2
lunohod OpenInkpot developer Posts: 211 Karma: 5627 Join Date: Mar 2008 Location: Stuttgart, Germany Device: N516,V3,PRS505,iLiad,eSlick,E60,K3,K4NT,M90,PB912,KoboMini	Just reboot it and it should work. Flash again if it doesn't work. Btw, where did you download 0.3? You'd better try to install 0.2.2 (http://openinkpot.org/pub/releases/0.2.2/) or even the daily snapshot (http://openinkpot.org/pub/daily/) If your Bebook has got 512Mb flash, you should use v3ext firmware.

06-15-2012, 05:03 AM	#3
Lunanne Junior Member Posts: 2 Karma: 10 Join Date: Jun 2012 Device: Kindle Paperwite (10th generation)	I tried v0.2.2 with the same problem and then I figured I could try the shiny daily build :P I think the flash size is a problem, I had only looked at the pictures I'll try v3ext when I get home. Thanks for the help.

06-15-2012, 06:36 AM	#4
lunohod OpenInkpot developer Posts: 211 Karma: 5627 Join Date: Mar 2008 Location: Stuttgart, Germany Device: N516,V3,PRS505,iLiad,eSlick,E60,K3,K4NT,M90,PB912,KoboMini	Maybe you should format your sd card with some kind of hdd low level format tool. It really solves most of the update issues on hanlin devices.

Advert