PRS-T1 New reader start up questions

amyb · 10-22-2011, 10:19 PM

I already own a Sony Pocket reader. Yesterday I bought the PRS-T1 and charged it up today. When I plugged it in it went thru the screens to ask me country, time zone and such. I unplugged it when it was fully charged. I just plugged it back into my PC hoping that it would recognize the reader library from my old pocket reader and transfer those files over to the new reader but once I plugged it in I got a message "data transfer mode" and it's been on there since (over 30 minutes) when I try to tap the screen or hit the home button I get nothing. Someone on here had said that the unit would say something about detecting another library and transfer those files. So, do I just uplug the new reader even though it says to check your computer to see if data transfer is complete?? I can't tell that's it's doing anything.....

khalleron · 10-22-2011, 11:38 PM

Quote:

Originally Posted by amyb

I already own a Sony Pocket reader. Yesterday I bought the PRS-T1 and charged it up today. When I plugged it in it went thru the screens to ask me country, time zone and such. I unplugged it when it was fully charged. I just plugged it back into my PC hoping that it would recognize the reader library from my old pocket reader and transfer those files over to the new reader but once I plugged it in I got a message "data transfer mode" and it's been on there since (over 30 minutes) when I try to tap the screen or hit the home button I get nothing. Someone on here had said that the unit would say something about detecting another library and transfer those files. So, do I just uplug the new reader even though it says to check your computer to see if data transfer is complete?? I can't tell that's it's doing anything.....

You have to touch the 'data transfer mode' button on the screen to put it into data transfer mode.

I did the same thing at first, too.

amyb · 10-22-2011, 11:48 PM

Well it's been in the data transfer mode now for over an hour. How long does it take to transfer?? At some point will it give me a different message or do I just unplug it?

khalleron · 10-22-2011, 11:51 PM

Quote:

Originally Posted by amyb

Well it's been in the data transfer mode now for over an hour. How long does it take to transfer?? At some point will it give me a different message or do I just unplug it?

It will stay in data transfer mode until you eject it. Don't just unplug it.

Are you using a PC or a Mac? Do you know how to eject a USB device?

amyb · 10-22-2011, 11:53 PM

I'm using a PC and no, I don't know how to eject it.

khalleron · 10-23-2011, 01:01 AM

On the tool bar there should be an icon that looks like a USB plug. Click on it and then click 'safely eject. . .'.

You can also eject from 'My computer'.

Calibre can also eject it.

I don't use the Sony Reader software, but I believe you need the latest edition in order for it to recognize the T1. The T1 uses a different operating system than the previous readers.

vxf · 10-23-2011, 01:08 AM

Indeed, I am a bit confused. The T1 does not support the old Reader Library software (or, rather, is not supported by the software). So you need to download the new Reader for PC. One you install it, it should prompt asking whether you wish to auto-import your old books and collections.

The download link:
http://ebookstore.sony.com/download/

Yet, beware. While the old software is not compatible with the T1, the new one isn't compatible with anything. Well, just kidding. It's supposed to work with the T1... and it somehow does. But it's full of bugs, it freezes, it doesn't display notes correctly, it is clunky, it won't let you delete some content... fun stuff...

khalleron · 10-23-2011, 10:06 AM

Quote:

Originally Posted by vxf

Indeed, I am a bit confused. The T1 does not support the old Reader Library software (or, rather, is not supported by the software). So you need to download the new Reader for PC. One you install it, it should prompt asking whether you wish to auto-import your old books and collections.

The download link:
http://ebookstore.sony.com/download/

Yet, beware. While the old software is not compatible with the T1, the new one isn't compatible with anything. Well, just kidding. It's supposed to work with the T1... and it somehow does. But it's full of bugs, it freezes, it doesn't display notes correctly, it is clunky, it won't let you delete some content... fun stuff...

Which is why I don't use it.

Well, I didn't use it with my 505, either.

Sony makes great hardware, but their software leaves something to be desired. Always has.

Use Calibre.

jersysman · 10-23-2011, 02:00 PM

If all the OP wants is to move the books that she has in her old library (with no notes or annotations) to her T1, then the new Sony PC software will get the job done. However, if she wants to have greater flexibility, then I say Calibre would be the program of choice, It is so easy to set up, yet has enough power to do whatever one wants to do with library management,

Amyb, as Kate said, your old Sony software will not work with the T1. That could be why it is still in data transfer mode as it sees nothing to transfer.

luvduchovny · 10-24-2011, 04:54 PM

The old reader software will not see your new T1. It might see your sd card if you have on in it. You have to install the new software either from the Sony website, or look for the G: Setting drive on your reader if it is plugged in. The software is there also. However, since the reader has come out there has been a software update to the Reader for PC.

10-22-2011, 10:19 PM	#1
amyb Member Posts: 17 Karma: 132 Join Date: Oct 2011 Device: Sony Prs-t1	New reader start up questions I already own a Sony Pocket reader. Yesterday I bought the PRS-T1 and charged it up today. When I plugged it in it went thru the screens to ask me country, time zone and such. I unplugged it when it was fully charged. I just plugged it back into my PC hoping that it would recognize the reader library from my old pocket reader and transfer those files over to the new reader but once I plugged it in I got a message "data transfer mode" and it's been on there since (over 30 minutes) when I try to tap the screen or hit the home button I get nothing. Someone on here had said that the unit would say something about detecting another library and transfer those files. So, do I just uplug the new reader even though it says to check your computer to see if data transfer is complete?? I can't tell that's it's doing anything.....

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS-505 Sony Reader freezes on start up	corroonb	Sony Reader	9	01-03-2012 07:45 AM
Reader library installs but won't start	alexbush	Sony Reader	2	02-09-2010 01:17 PM
Connect Reader Crashing- won't start	eppythacher	Sony Reader	5	01-14-2010 09:58 PM
txtr-Reader - Start am 1. Dezember?	bcgie	Andere Lesegeräte	97	12-13-2009 06:23 PM
E-reader won't start up	staticradar	Sony Reader	1	01-29-2009 06:35 PM

10-22-2011, 11:48 PM	#3
amyb Member Posts: 17 Karma: 132 Join Date: Oct 2011 Device: Sony Prs-t1	Well it's been in the data transfer mode now for over an hour. How long does it take to transfer?? At some point will it give me a different message or do I just unplug it?

10-22-2011, 11:53 PM	#5
amyb Member Posts: 17 Karma: 132 Join Date: Oct 2011 Device: Sony Prs-t1	I'm using a PC and no, I don't know how to eject it.

10-23-2011, 01:01 AM	#6
khalleron Kate Posts: 1,700 Karma: 3605799 Join Date: Mar 2009 Location: Oregon, United States Device: MeeBook, Kobo Libra Colour	On the tool bar there should be an icon that looks like a USB plug. Click on it and then click 'safely eject. . .'. You can also eject from 'My computer'. Calibre can also eject it. I don't use the Sony Reader software, but I believe you need the latest edition in order for it to recognize the T1. The T1 uses a different operating system than the previous readers.

10-23-2011, 01:08 AM	#7
vxf Guru Posts: 944 Karma: 1490348 Join Date: Jun 2010 Location: Norman, OK Device: Sony PRS 350, 900, 950; Kindles (ALL of them!); Kobo Aura One	Indeed, I am a bit confused. The T1 does not support the old Reader Library software (or, rather, is not supported by the software). So you need to download the new Reader for PC. One you install it, it should prompt asking whether you wish to auto-import your old books and collections. The download link: http://ebookstore.sony.com/download/ Yet, beware. While the old software is not compatible with the T1, the new one isn't compatible with anything. Well, just kidding. It's supposed to work with the T1... and it somehow does. But it's full of bugs, it freezes, it doesn't display notes correctly, it is clunky, it won't let you delete some content... fun stuff...

10-23-2011, 02:00 PM	#9
jersysman Wizard Posts: 1,747 Karma: 3761220 Join Date: Mar 2011 Location: Pennsylvania Device: T1 Red, Kindle Fire, Kindle PW, PW2, Nook HD+, Kobo Mini, Aura HD	If all the OP wants is to move the books that she has in her old library (with no notes or annotations) to her T1, then the new Sony PC software will get the job done. However, if she wants to have greater flexibility, then I say Calibre would be the program of choice, It is so easy to set up, yet has enough power to do whatever one wants to do with library management, Amyb, as Kate said, your old Sony software will not work with the T1. That could be why it is still in data transfer mode as it sees nothing to transfer.

10-24-2011, 04:54 PM	#10
luvduchovny Zealot Posts: 145 Karma: 137186 Join Date: Mar 2009 Device: Sony Reader PRS-500, PRS-600, PRS-650, PRS-T1, PRS-T3	The old reader software will not see your new T1. It might see your sd card if you have on in it. You have to install the new software either from the Sony website, or look for the G: Setting drive on your reader if it is plugged in. The software is there also. However, since the reader has come out there has been a software update to the Reader for PC.

Advert

Advert