Sticking or Sluggish K3 Power Switch

Bobshere · 12-02-2010, 05:13 PM

Bob says:
I got to this discussion from Google, searching for Kindle 3 sticky power switch. I've read thru discussions I found on the net. This seems to be a not uncommon issue with these new Kindles. Then I watched a disassembly of a K3 on UTube. I concluded that the very robust looking spring for this switch made it very unlikely as a culprit. I keep my K3 clean, so contamination wasn't an issue. I decided something was causing friction between the plastic slider and plastic casing. I simply turned the Kindle on/off on/off rapidly 10 or 15 times. That TOTALLY solved the problem without any lubricants or disassembly.

Bob Orinda, California

ScoutPilot · 12-03-2010, 02:20 AM

I'll second that! I had the same issue at first but after scrolling through a bunch of screensavers I put on there one day, it slides really nicely now.

Doug Huffman · 12-03-2010, 09:05 AM

Quote:

Originally Posted by Mr. Shere

[ ... ]I keep my K3 clean, so contamination wasn't an issue. I decided something was causing friction between the plastic slider and plastic casing.

I think "something" causing friction qualifies as contamination - the undesirable presence of a foreign substance. That'll be cured by judicious application of an appropriate cleaner. Lubrication is just another foreign substance.

violent23 · 12-03-2010, 12:13 PM

Mine was also like that at first, but after a little bit of use the "stickiness" whent away. Hopefully yours does too, if not I would call Amazon and get a replacement.

mldavis2 · 12-04-2010, 09:39 AM

The switch mechanism is so incredibly simple and the spring virtually unbreakable that contamination or damage is the only likely reason for a sticking switch. Try blowing some compressed air into the switch area and see what flies out.

(Could be belly-button lint if you read in bed.)

TenaciousBadger · 12-04-2010, 09:41 AM

i have had this problem two on a couple of occasions. firmly but gently nudging the button all the way and back a number of times solved the problem.

duckeedoug · 12-05-2010, 01:48 AM

I believe that what may have thrown some users (including myself) off is that the switch initially was as smooth as butter, and then issues started cropping up after some time. I had my K3 for approximately a month with no issues, and then I started having the slow switch problem. I thought that it may have been related to the cooler climate of winter. However the problem has all but disappeared and the switch is working as it should even with the cooler climate. I did notice that when I was having the issue one day I turned the K3 on and it felt like it had overcome some type of internal resistants. I haven't had the issue since that day which was about a week ago.

12-02-2010, 05:13 PM	#1
Bobshere Junior Member Posts: 1 Karma: 10 Join Date: Dec 2010 Device: Kindle 3	Sticking or Sluggish K3 Power Switch Bob says: I got to this discussion from Google, searching for Kindle 3 sticky power switch. I've read thru discussions I found on the net. This seems to be a not uncommon issue with these new Kindles. Then I watched a disassembly of a K3 on UTube. I concluded that the very robust looking spring for this switch made it very unlikely as a culprit. I keep my K3 clean, so contamination wasn't an issue. I decided something was causing friction between the plastic slider and plastic casing. I simply turned the Kindle on/off on/off rapidly 10 or 15 times. That TOTALLY solved the problem without any lubricants or disassembly. Bob Orinda, California

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dropped 505, Now Power Switch Broken	JuniperPearl	Sony Reader	14	08-29-2010 02:46 PM
Sony 505 Power Switch not working	dsenior	Sony Reader	6	03-29-2010 03:37 PM
Alternative to DR1000 butchery for a Power Switch	curbarthedog	iRex	31	10-20-2009 04:23 PM
Power switch taking 11seconds?	Starhawk	Amazon Kindle	11	03-24-2009 08:55 PM
Power switch repair = $90	Penforhire	Sony Reader	7	02-24-2009 05:18 PM

12-03-2010, 02:20 AM	#2
ScoutPilot Enthusiast Posts: 29 Karma: 10 Join Date: Nov 2010 Device: Sony Pocket, Kindle 2, Kindle 3 3G+WiFi	I'll second that! I had the same issue at first but after scrolling through a bunch of screensavers I put on there one day, it slides really nicely now.

12-03-2010, 12:13 PM	#4
violent23 Connoisseur Posts: 86 Karma: 674 Join Date: Oct 2010 Device: Boox Go 7, reMarkable Paper Pro Move, Supernote Nomad, Mudita Kompakt	Mine was also like that at first, but after a little bit of use the "stickiness" whent away. Hopefully yours does too, if not I would call Amazon and get a replacement.

12-04-2010, 09:39 AM	#5
mldavis2 Coffee Nut Posts: 410 Karma: 298350 Join Date: Oct 2010 Location: Missouri Device: Kindle 3; K4PC; Calibre	The switch mechanism is so incredibly simple and the spring virtually unbreakable that contamination or damage is the only likely reason for a sticking switch. Try blowing some compressed air into the switch area and see what flies out. (Could be belly-button lint if you read in bed.)

12-04-2010, 09:41 AM	#6
TenaciousBadger Mrawr? Posts: 1,109 Karma: 15039064 Join Date: Aug 2010 Device: kindle 3 wifi	i have had this problem two on a couple of occasions. firmly but gently nudging the button all the way and back a number of times solved the problem.

12-05-2010, 01:48 AM	#7
duckeedoug Zealot Posts: 122 Karma: 160 Join Date: Mar 2008 Device: Sony PRS 505	I believe that what may have thrown some users (including myself) off is that the switch initially was as smooth as butter, and then issues started cropping up after some time. I had my K3 for approximately a month with no issues, and then I started having the slow switch problem. I thought that it may have been related to the cooler climate of winter. However the problem has all but disappeared and the switch is working as it should even with the cooler climate. I did notice that when I was having the issue one day I turned the K3 on and it felt like it had overcome some type of internal resistants. I haven't had the issue since that day which was about a week ago.

Advert

Advert