LRF output - Page 12

dsyzling · 06-07-2007, 10:09 AM

Tried 0.3.46 and the error raised in ticket #99 no longer appears. However the code samples now appear with span tag markup within the resulting lrf document.

Regards
Darren

kovidgoyal · 06-07-2007, 10:44 AM

That's because they're inside <pre> elements. This is the correct behavior.

JSWolf · 06-07-2007, 10:03 PM

I hope the ticket I put in for changing the way --font-delta=FONT_DELTA works is not going to be difficult to change. I would like to have it adjust by 1pt and not 2pts.

Jon

JSWolf · 06-07-2007, 11:10 PM

I did just find what I concider to be a bug in html2lrf. It does not respond properly to a <span style=font-size:'13pt'> It outputs the font in the same size as if I had done a <span style=font-size:'small'> small is 12pt and 13pt is what I was trying to set. I would like more control over the font size by using the point size in the font-size style.

I'll be putting this up as a ticket as I feel it is a bug.

JSWolf · 06-08-2007, 01:49 PM

I notice the two tickets I've put in have been fixed. How can I get the fixes?

I've looked at how to update from SVN and I don't have the files needed to pull from there...

python setup.py develop --uninstall
svn update
python setup.py develop (as root)

No setup.py and no svn

I'm on Windows and use the Windows installer.

kovidgoyal · 06-08-2007, 02:08 PM

Running libprs500 from svn on windows is not easy. Just wait a little and I'll release the next version soon. Hopefully today, probably tomorrow.

JSWolf · 06-08-2007, 02:09 PM

Quote:

Originally Posted by kovidgoyal

Running libprs500 from svn on windows is not easy. Just wait a little and I'll release the next version soon. Hopefully today, probably tomorrow.

Thanks! I'm looking forward to it.

JSWolf · 06-09-2007, 10:42 PM

I hate to be a pest, but any idea when the new Windows version of html2lrf will be ready? I've got a few books waiting to be converted that need the ability to tweak the font size. I'm getting either too small at small and too big at medium. Thanks!

Jon

kovidgoyal · 06-09-2007, 10:57 PM

Released 0.3.48
1) Refined font handling to address JSWolf's complaints
2) Bug fixes

There have been a lot of changes under the hood as I move the codebase towards 0.4.0, so some things might have broken. Let me know.

JSWolf · 06-10-2007, 09:36 AM

Quote:

Originally Posted by kovidgoyal

Released 0.3.48
1) Refined font handling to address JSWolf's complaints
2) Bug fixes

There have been a lot of changes under the hood as I move the codebase towards 0.4.0, so some things might have broken. Let me know.

--right-margin is broken. Changing the right margin does not do a thing. All that happens if I lessen the left margin is it moves the text over properly, but makes the right margin larger. if I set just a right margin, nothing happens. I set a left margin of 5 (worked) and a right margin of 30 and got no different then if I had not set a right margin.

Jon

awh_tokyo · 06-10-2007, 09:53 PM

[dumb question answered in another thread] Oop, can I not delete this?

kovidgoyal · 06-12-2007, 08:00 PM

Released 0.3.49
1) Bug fixes
2) OSX installer

Xenophon · 06-12-2007, 10:06 PM

Mac OS Installer (actually an downloadable, self-contained app) -- YAAAAY!

Installer fails on my Mac.

Using the command-line installation (via easy_install) -- html2lrf still produces output that lrf-meta doesn't like (as per earlier ticket), but no new bugs.

kovidgoyal · 06-12-2007, 10:11 PM

You can't run it for within the dmg. You have to drag it to a folder of you filesystem. I'll add that to the wiki. I'll address the lrf-meta bug later.

EDIT: Oops there was a silly little typo in the script generating the OSX dmg. Fixed, version 0.3.50 is being uploaded now.

JSWolf · 06-17-2007, 10:26 PM

I recently installed Libprs500 on our laptop running Windows XP Pro. It did not have the Connect software installed. I used it to delete a book and to add another book. The problem I encountered was that it totally botched up the collections I had setup. Did I do something incorrectly or does it do that if you have collections setup?

06-10-2007, 09:53 PM	#176
awh_tokyo Enthusiast Posts: 33 Karma: 10 Join Date: Jun 2007 Location: Tokyo, Japan Device: PRS-505	[dumb question answered in another thread] Oop, can I not delete this? Last edited by awh_tokyo; 06-10-2007 at 09:55 PM. Reason: dumb question answered elsewhere

06-12-2007, 10:11 PM	#179
kovidgoyal creator of calibre Posts: 45,359 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	You can't run it for within the dmg. You have to drag it to a folder of you filesystem. I'll add that to the wiki. I'll address the lrf-meta bug later. EDIT: Oops there was a silly little typo in the script generating the OSX dmg. Fixed, version 0.3.50 is being uploaded now. Last edited by kovidgoyal; 06-12-2007 at 11:14 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Change font of header for LRF Output on PRS 505	duckbill	Calibre	3	05-15-2010 11:07 AM
Pissed off with LRF formatting: LRF/LRS clean tool?	grimborg	LRF	8	02-15-2010 01:14 PM
Fonts for LRF output	krischik	Calibre	1	10-03-2009 05:01 AM
CBZ > LRF (LRF>HTML/MOBI????)	sideburnt	Calibre	4	09-15-2009 06:44 AM
libprs500 Issues Converting .LIT to .LRF - .LRF crashes everything	vasbinde	Calibre	6	02-14-2008 12:16 PM

06-07-2007, 10:09 AM	#166
dsyzling Member Posts: 13 Karma: 10 Join Date: Dec 2006 Device: Sony Reader	Tried 0.3.46 and the error raised in ticket #99 no longer appears. However the code samples now appear with span tag markup within the resulting lrf document. Regards Darren

06-07-2007, 10:44 AM	#167
kovidgoyal creator of calibre Posts: 45,359 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	That's because they're inside <pre> elements. This is the correct behavior.

06-07-2007, 10:03 PM	#168
JSWolf Resident Curmudgeon Posts: 79,758 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I hope the ticket I put in for changing the way --font-delta=FONT_DELTA works is not going to be difficult to change. I would like to have it adjust by 1pt and not 2pts. Jon

06-07-2007, 11:10 PM	#169
JSWolf Resident Curmudgeon Posts: 79,758 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I did just find what I concider to be a bug in html2lrf. It does not respond properly to a <span style=font-size:'13pt'> It outputs the font in the same size as if I had done a <span style=font-size:'small'> small is 12pt and 13pt is what I was trying to set. I would like more control over the font size by using the point size in the font-size style. I'll be putting this up as a ticket as I feel it is a bug.

06-08-2007, 01:49 PM	#170
JSWolf Resident Curmudgeon Posts: 79,758 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I notice the two tickets I've put in have been fixed. How can I get the fixes? I've looked at how to update from SVN and I don't have the files needed to pull from there... python setup.py develop --uninstall svn update python setup.py develop (as root) No setup.py and no svn I'm on Windows and use the Windows installer.

06-08-2007, 02:08 PM	#171
kovidgoyal creator of calibre Posts: 45,359 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Running libprs500 from svn on windows is not easy. Just wait a little and I'll release the next version soon. Hopefully today, probably tomorrow.

06-09-2007, 10:42 PM	#173
JSWolf Resident Curmudgeon Posts: 79,758 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I hate to be a pest, but any idea when the new Windows version of html2lrf will be ready? I've got a few books waiting to be converted that need the ability to tweak the font size. I'm getting either too small at small and too big at medium. Thanks! Jon

06-09-2007, 10:57 PM	#174
kovidgoyal creator of calibre Posts: 45,359 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Released 0.3.48 1) Refined font handling to address JSWolf's complaints 2) Bug fixes There have been a lot of changes under the hood as I move the codebase towards 0.4.0, so some things might have broken. Let me know.

06-12-2007, 08:00 PM	#177
kovidgoyal creator of calibre Posts: 45,359 Karma: 27182818 Join Date: Oct 2006 Location: Mumbai, India Device: Various	Released 0.3.49 1) Bug fixes 2) OSX installer

06-12-2007, 10:06 PM	#178
Xenophon curmudgeon Posts: 1,487 Karma: 5748190 Join Date: Jun 2006 Location: Redwood City, CA USA Device: Kobo Aura HD, (ex)nook, (ex)PRS-700, (ex)PRS-500	Mac OS Installer (actually an downloadable, self-contained app) -- YAAAAY! Installer fails on my Mac. Using the command-line installation (via easy_install) -- html2lrf still produces output that lrf-meta doesn't like (as per earlier ticket), but no new bugs.

06-17-2007, 10:26 PM	#180
JSWolf Resident Curmudgeon Posts: 79,758 Karma: 145864619 Join Date: Nov 2006 Location: Roslindale, Massachusetts Device: Kobo Libra 2, Kobo Aura H2O, PRS-650, PRS-T1, nook STR, PW3	I recently installed Libprs500 on our laptop running Windows XP Pro. It did not have the Connect software installed. I used it to delete a book and to add another book. The problem I encountered was that it totally botched up the collections I had setup. Did I do something incorrectly or does it do that if you have collections setup?