PRSCustomizer: Customize and personalize your PRS505 Reader - Page 48

AiBo · 07-05-2009, 07:38 AM

I am using the Sony PRS-700 and would like to use your program to gain Chinese font support. Although if I flash the device won't it cause it to have the 505 firmware?

Is there a better option to gain Chinese font support?

Thanks in advance!

AiBo

JeffElkins · 07-05-2009, 10:38 AM

The 700 is not supported, and it's unlikely it ever will be.

JSWolf · 07-05-2009, 10:41 AM

Quote:

Originally Posted by AiBo

I am using the Sony PRS-700 and would like to use your program to gain Chinese font support. Although if I flash the device won't it cause it to have the 505 firmware?

Is there a better option to gain Chinese font support?

Thanks in advance!

AiBo

The best way to get Chinese font support on your 700 is to use ePub and embed the Chinese fonts you want to use.

See ePub custom Fonts on 700 and 505 for more information on how to do this.

AiBo · 07-10-2009, 02:36 AM

Jeff, thank you greatly for taking the time to respond.

AiBo · 07-10-2009, 02:36 AM

Thanks for the lead ... I will look into it.

JeffElkins · 07-10-2009, 12:27 PM

Quote:

Originally Posted by AiBo

Jeff, thank you greatly for taking the time to respond.

Wish I had better news, AiBo. I don't own a 700 and have no plans to get one.

stranjer · 07-16-2009, 06:20 PM

Thank you Jeff for the customizer, it works like magic!!!

JeffElkins · 07-16-2009, 07:32 PM

Quote:

Originally Posted by stranjer

Thank you Jeff for the customizer, it works like magic!!!

You're welcome.

Mac Sidewinder · 08-02-2009, 06:18 PM

I used the customizer with great success. I changed the power button option, stoppped the scaling fonts on the menu, and of course personalized it BUT......I can't seem to get the logo option to work right. I modified the correct png file with my little picture and overlaid the "reader" graphic with it and resaved the file with the same name. When I flash my 505 I get the logo fine but my reader now has 2 additional vertical lines from top to bottom on the menu page????? The vertical lines are evenly spaced and divide the reader into 3 equal sections from top to bottom. I tried it twice with new files each time and the same thing happens. Any ideas what causes this?

Mac

PS. Other than this small problem (on my end I'm sure) this is a great piece of software. thanks.

JeffElkins · 08-02-2009, 07:15 PM

Quote:

Originally Posted by Mac Sidewinder

I used the customizer with great success. I changed the power button option, stoppped the scaling fonts on the menu, and of course personalized it BUT......I can't seem to get the logo option to work right. I modified the correct png file with my little picture and overlaid the "reader" graphic with it and resaved the file with the same name. When I flash my 505 I get the logo fine but my reader now has 2 additional vertical lines from top to bottom on the menu page????? The vertical lines are evenly spaced and divide the reader into 3 equal sections from top to bottom. I tried it twice with new files each time and the same thing happens. Any ideas what causes this?

Mac

PS. Other than this small problem (on my end I'm sure) this is a great piece of software. thanks.

Make sure tour logo file is a png, RGB color and eight bits/channel. Other than that, I'm not sure what your problem might be...

PJ45 · 08-07-2009, 03:55 PM

could it be the size is bigger than the original?
I simply opened the original in photoshop as a base and worked on it from there, saved the new image with my name and logo to replace the original....it works great!

trapm · 08-19-2009, 03:01 AM

Hi, I have the (German) firmware Version 1.4.00.23260.

I would love to change the language and some settings.

How can I make that happen?

What help can I provide and how?

I can also help with the programming.
I have had experience with RB (one version lower than the version you use but I could upgrade) in the past and I currently work with Cocoa.

JvdW · 08-19-2009, 04:03 AM

Quote:

Originally Posted by trapm

Hi, I have the (German) firmware Version 1.4.00.23260.

I would love to change the language and some settings.

How can I make that happen?

See post #699

Basically downgrade your german 1.4 version to the 1.1 USA version and then PRSCustomizer will work.
You can save your 1.4 version for future restore attempt.

Regards,

Joop

Valwit · 08-19-2009, 07:48 AM

Quote:

Originally Posted by JvdW

See post #699

Basically downgrade your german 1.4 version to the 1.1 USA version and then PRSCustomizer will work.
You can save your 1.4 version for future restore attempt.

Regards,

Joop

the english 1.2 (UK) works fine too - you don't get the crazy US date format

miha · 08-19-2009, 10:04 AM

I am the new and not so proud owner of PRS-505. I successfully followed all the steps for customizing my device for cyrillic fonts - book title and author are readable. The LITTLE problem is book itself is still NOT readable. Am I doing something wrong. Book is on the SD card in the RTF format. Need help!
Thank you.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PRS500 - Will we be able to use PRSCustomizer after upgrading firmware?	jimmyzou	Sony Reader	0	11-30-2009 11:10 AM
Prscustomizer not working and info on unicode	shilpa	Sony Reader	1	08-14-2009 02:35 AM
beginner to prs505 reader	adixon	Sony Reader	30	12-08-2008 02:00 PM
Help with PRSCustomizer!! Please	rlanger	Sony Reader	11	11-28-2008 06:47 AM
How-To Customize the Reader Name and Theme	Frog29	Sony Reader Dev Corner	1	08-08-2008 08:49 PM

07-05-2009, 07:38 AM	#706
AiBo Junior Member Posts: 6 Karma: 10 Join Date: Jul 2009 Location: China Device: Sony PRS-700	I am using the Sony PRS-700 and would like to use your program to gain Chinese font support. Although if I flash the device won't it cause it to have the 505 firmware? Is there a better option to gain Chinese font support? Thanks in advance! AiBo

07-05-2009, 10:38 AM	#707
JeffElkins Guru Posts: 780 Karma: 1416 Join Date: Jan 2008 Device: Kobo Clara 2E/HD, Kindle PW	The 700 is not supported, and it's unlikely it ever will be.

07-10-2009, 02:36 AM	#709
AiBo Junior Member Posts: 6 Karma: 10 Join Date: Jul 2009 Location: China Device: Sony PRS-700	Jeff, thank you greatly for taking the time to respond.

07-10-2009, 02:36 AM	#710
AiBo Junior Member Posts: 6 Karma: 10 Join Date: Jul 2009 Location: China Device: Sony PRS-700	Thanks for the lead ... I will look into it.

07-16-2009, 06:20 PM	#712
stranjer n00b Posts: 26 Karma: 10 Join Date: Jan 2009 Location: Transylvania/Novum Forum Siculorum Device: prs 505	Thank you Jeff for the customizer, it works like magic!!!

08-02-2009, 06:18 PM	#714
Mac Sidewinder Junior Member Posts: 5 Karma: 10 Join Date: Aug 2009 Device: Sony PRS-505	I used the customizer with great success. I changed the power button option, stoppped the scaling fonts on the menu, and of course personalized it BUT......I can't seem to get the logo option to work right. I modified the correct png file with my little picture and overlaid the "reader" graphic with it and resaved the file with the same name. When I flash my 505 I get the logo fine but my reader now has 2 additional vertical lines from top to bottom on the menu page????? The vertical lines are evenly spaced and divide the reader into 3 equal sections from top to bottom. I tried it twice with new files each time and the same thing happens. Any ideas what causes this? Mac PS. Other than this small problem (on my end I'm sure) this is a great piece of software. thanks.

08-07-2009, 03:55 PM	#716
PJ45 Member Posts: 20 Karma: 10 Join Date: Jun 2009 Device: Frs 505	could it be the size is bigger than the original? I simply opened the original in photoshop as a base and worked on it from there, saved the new image with my name and logo to replace the original....it works great!

08-19-2009, 03:01 AM	#717
trapm Junior Member Posts: 1 Karma: 10 Join Date: Aug 2009 Device: Sony PRS-505	Hi, I have the (German) firmware Version 1.4.00.23260. I would love to change the language and some settings. How can I make that happen? What help can I provide and how? I can also help with the programming. I have had experience with RB (one version lower than the version you use but I could upgrade) in the past and I currently work with Cocoa.

08-19-2009, 10:04 AM	#720
miha Junior Member Posts: 3 Karma: 10 Join Date: Aug 2009 Device: prs-505	I am the new and not so proud owner of PRS-505. I successfully followed all the steps for customizing my device for cyrillic fonts - book title and author are readable. The LITTLE problem is book itself is still NOT readable. Am I doing something wrong. Book is on the SD card in the RTF format. Need help! Thank you.