[GUI Plugin] OverDrive Libby

[foosion]

Originally Posted by dhdurgee

I tried this out today and unfortunately ran into what appears to be another error:

Spoiler:

calibre, version 7.16.0
ERROR: Unhandled exception: <b>ClientConnectionError</b>: Error synchronizing data<p>Check your connection or retry in a few minutes.</p>

calibre 7.16 embedded-python: True
Linux-6.8.0-44-generic-x86_64-with-glibc2.39 Linux ('64bit', 'ELF')
('Linux', '6.8.0-44-generic', '#44-Ubuntu SMP PREEMPT_DYNAMIC Tue Aug 13 13:35:26 UTC 2024')
Python 3.11.5
Interface language: None
EXE path: /opt/calibre/bin/calibre
Successfully initialized third party plugins: DeACSM (0, 0, 16) && DeDRM (10, 0, 3) && Hyphenate This! (0, 1, 3) && OverDrive Libby (0, 1, 9)
Traceback (most recent call last):
File "urllib/request.py", line 1348, in do_open
File "http/client.py", line 1286, in request
File "http/client.py", line 1332, in _send_request
File "http/client.py", line 1281, in endheaders
File "http/client.py", line 1041, in _send_output
File "http/client.py", line 979, in send
File "http/client.py", line 1458, in connect
File "ssl.py", line 517, in wrap_socket
File "ssl.py", line 1108, in _create
File "ssl.py", line 1379, in do_handshake
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "calibre_plugins.overdrive_libby.libby.client" , line 518, in send_request
response = req_opener.open(req, timeout=self.timeout)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "urllib/request.py", line 519, in open
File "urllib/request.py", line 536, in _open
File "urllib/request.py", line 496, in _call_chain
File "urllib/request.py", line 1391, in https_open
File "urllib/request.py", line 1351, in do_open
urllib.error.URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)>

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "calibre_plugins.overdrive_libby.workers", line 351, in run
synced_state = libby_client.sync()
^^^^^^^^^^^^^^^^^^^
File "calibre_plugins.overdrive_libby.libby.client" , line 631, in sync
res: Dict = self.send_request("chip/sync")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "calibre_plugins.overdrive_libby.libby.client" , line 556, in send_request
raise ClientConnectionError(
calibre_plugins.overdrive_libby.libby.errors.Clien tConnectionError: <calibre_plugins.overdrive_libby.libby.errors.Clie ntConnectionError; http_status=0, msg='URLError <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)>', error_response='''>

This appears to be some sort of an SSL certificate error.

Dave

PS: got this fixed with guidance from:
https://github.com/ping/libby-calibre-plugin/issues/33

For others, since you seem to have gotten it fixed, "sentry-read.svc.overdrive.com" from the error message means you haven't installed the new version of plugin. The new version changes from the overdrive domain to a libbyapp domain. As sgmoore posted above: https://gofile.io/d/SJp0r9

[sombrero]

In case someone needs this, it worked for me. I had everything set up and working, but suddenly, one day it stopped. The problem is that sometimes your code expires, and in that case, you need to generate a new one. In the new UI, I couldn’t find how to generate a new code, so you need to go to Libby, then > Copy to Another Device > use one of the options there (Sonos or Android Automotive). In my case, I chose Sonos, and then I copied the generated code and pasted it into Calibre > OverDriveLibby plugin > Libby Setup Code. Note that using the 'Generate Setup Code' button is not a valid option since it results in an error— in my case, a problem related to the SSL certificate or, in some instances, 'missing_chip'. I hope this helps.

[foosion]

I just got a 403 error downloading a book, after searching for it and borrowing it successfully with the plugin (and downloading the .acsm from libbyapp.com, getting the book with ADE and importing to Calibre). I last borrowed a book with the plugin yesterday.

calibre, version 7.17.0
ERROR: Unhandled exception: <b>ClientForbiddenError</b>: Failed to download e-book<p>HTTP Error 403: Forbidden</p>

calibre 7.17  embedded-python: True
Windows-10-10.0.19045-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19045')
Python 3.11.5
Windows: ('10', '10.0.19045', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: DeACSM (0, 0, 16) && DeDRM (10, 0, 3) && Action Chains (1, 20, 7) && EpubSplit (3, 6, 0) && Find Duplicates (1, 6, 3) && KePub Output (3, 6, 11) && Kindle hi-res covers (0, 5, 1) && Kobo Utilities (2, 17, 1) && KoboTouchExtended (3, 6, 11) && Modify ePub (1, 8, 4) && OverDrive Libby (0, 1, 9) && Reading List (1, 15, 4) && SmartEject (2, 5, 1)
Traceback (most recent call last):
  File "calibre_plugins.overdrive_libby.libby.client", line 520, in send_request
  File "urllib\request.py", line 525, in open
  File "urllib\request.py", line 634, in http_response
  File "urllib\request.py", line 563, in error
  File "urllib\request.py", line 496, in _call_chain
  File "urllib\request.py", line 643, in http_error_default
urllib.error.HTTPError: HTTP Error 403: Forbidden

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "calibre\gui2\threaded_jobs.py", line 85, in start_work
  File "calibre_plugins.overdrive_libby.ebook_download", line 50, in __call__
  File "calibre_plugins.overdrive_libby.ebook_download", line 94, in _custom_download
  File "calibre_plugins.overdrive_libby.libby.client", line 808, in fulfill_loan_file
  File "calibre_plugins.overdrive_libby.libby.client", line 540, in send_request
  File "calibre_plugins.overdrive_libby.libby.errors", line 143, in process
calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError: <calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError; http_status=403, msg='HTTP Error 403: Forbidden', error_response=' ''>

EDIT: I tried https://gofile.io/d/SJp0r9 (which I had been using) and then https://github.com/sgmoore/libby-cal...es/tag/v0.1.9a

I tried entering a libby code as in #210, but that didn't help.

[miss_p1nky]

Originally Posted by foosion

I just got a 403 error downloading a book, after searching for it and borrowing it successfully with the plugin (and downloading the .acsm from libbyapp.com, getting the book with ADE and importing to Calibre). I last borrowed a book with the plugin yesterday.

calibre, version 7.17.0
ERROR: Unhandled exception: <b>ClientForbiddenError</b>: Failed to download e-book<p>HTTP Error 403: Forbidden</p>

calibre 7.17  embedded-python: True
Windows-10-10.0.19045-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19045')
Python 3.11.5
Windows: ('10', '10.0.19045', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: DeACSM (0, 0, 16) && DeDRM (10, 0, 3) && Action Chains (1, 20, 7) && EpubSplit (3, 6, 0) && Find Duplicates (1, 6, 3) && KePub Output (3, 6, 11) && Kindle hi-res covers (0, 5, 1) && Kobo Utilities (2, 17, 1) && KoboTouchExtended (3, 6, 11) && Modify ePub (1, 8, 4) && OverDrive Libby (0, 1, 9) && Reading List (1, 15, 4) && SmartEject (2, 5, 1)
Traceback (most recent call last):
  File "calibre_plugins.overdrive_libby.libby.client", line 520, in send_request
  File "urllib\request.py", line 525, in open
  File "urllib\request.py", line 634, in http_response
  File "urllib\request.py", line 563, in error
  File "urllib\request.py", line 496, in _call_chain
  File "urllib\request.py", line 643, in http_error_default
urllib.error.HTTPError: HTTP Error 403: Forbidden

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "calibre\gui2\threaded_jobs.py", line 85, in start_work
  File "calibre_plugins.overdrive_libby.ebook_download", line 50, in __call__
  File "calibre_plugins.overdrive_libby.ebook_download", line 94, in _custom_download
  File "calibre_plugins.overdrive_libby.libby.client", line 808, in fulfill_loan_file
  File "calibre_plugins.overdrive_libby.libby.client", line 540, in send_request
  File "calibre_plugins.overdrive_libby.libby.errors", line 143, in process
calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError: <calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError; http_status=403, msg='HTTP Error 403: Forbidden', error_response=' ''>

EDIT: I tried https://gofile.io/d/SJp0r9 (which I had been using) and then https://github.com/sgmoore/libby-cal...es/tag/v0.1.9a

I tried entering a libby code as in #210, but that didn't help.

+1.
Loans & holds still register but downloading doesn't work. I'm currently trying to get the code but may be that won't make much change?

[foosion]

I tried getting a new token as shown in https://www.mobileread.com/forums/sh...&postcount=140 and that didn't help either.

I can download an acsm file from libbyapp.com, import that to Calibre and the deacsm plugin imports the ebook file.

[Ellsinore]

Can't even get past the setup code. I have no idea what any of this means. Other than, "Oh, no you don't!"

calibre, version 7.18.0
ERROR: Unhandled exception: <b>ClientConnectionError</b>:&lt;calibre_plugins.overdrive_libby.libby.error s.ClientConnectionError; http_status=0, msg='URLError &lt;urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)&gt;', error_response='''&gt;

calibre 7.18 embedded-python: True
Windows-10-10.0.19045-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19045')
Python 3.11.5
Windows: ('10', '10.0.19045', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: DeDRM (7, 2, 1) && Goodreads (1, 8, 2) && Goodreads Sync (1, 16, 8) && OverDrive Libby (0, 1, 9)
Traceback (most recent call last):
File "urllib\request.py", line 1348, in do_open
File "http\client.py", line 1286, in request
File "http\client.py", line 1332, in _send_request
File "http\client.py", line 1281, in endheaders
File "http\client.py", line 1041, in _send_output
File "http\client.py", line 979, in send
File "http\client.py", line 1458, in connect
File "ssl.py", line 517, in wrap_socket
File "ssl.py", line 1108, in _create
File "ssl.py", line 1379, in do_handshake
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "calibre_plugins.overdrive_libby.libby.client" , line 518, in send_request
File "urllib\request.py", line 519, in open
File "urllib\request.py", line 536, in _open
File "urllib\request.py", line 496, in _call_chain
File "urllib\request.py", line 1391, in https_open
File "urllib\request.py", line 1351, in do_open
urllib.error.URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)>

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
File "calibre_plugins.overdrive_libby.action", line 133, in <lambda>
File "calibre\customize\__init__.py", line 188, in do_user_config
File "calibre_plugins.overdrive_libby.__init__", line 104, in save_settings
File "calibre_plugins.overdrive_libby.config", line 947, in save_settings
File "calibre_plugins.overdrive_libby.libby.client" , line 593, in get_chip
File "calibre_plugins.overdrive_libby.libby.client" , line 556, in send_request
calibre_plugins.overdrive_libby.libby.errors.Clien tConnectionError: <calibre_plugins.overdrive_libby.libby.errors.Clie ntConnectionError; http_status=0, msg='URLError <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: Hostname mismatch, certificate is not valid for 'sentry-read.svc.overdrive.com'. (_ssl.c:1006)>', error_response='''>

[danamr]

Same error here.
I am on a Mac. I see Libby has changed how it generates codes, and now uses a "Passkey".

[danamr]

I have the same error message in calibre. Using a Mac. It appears there is a work-around for Windows.

[foosion]

Originally Posted by Ellsinore

Can't even get past the setup code. I have no idea what any of this means. Other than, "Oh, no you don't!"

You do not appear to have the latest version of the plugin, since the overdrive domain was changed to a libby domain. Also you have to use a browser to get a token rather than just using the setup code (or at least I and others had to). Read back through recent comments for a link to the latest version, other setup info and a current issue.

[Ellsinore]

Originally Posted by foosion

You do not appear to have the latest version of the plugin, since the overdrive domain was changed to a libby domain.

I installed it a few hours ago. Is that not the latest verion?

Also you have to use a browser to get a token rather than just using the setup code (or at least I and others had to).

The plugin asks for the setup code. Is that NOT what I'm looking for? I followed the Libby instructions to obtain the code.

Read back through recent comments for a link to the latest version, other setup info and a current issue.

So the plugin I installed today is not current?

[miss_p1nky]

Originally Posted by Ellsinore

I installed it a few hours ago. Is that not the latest verion?

The plugin asks for the setup code. Is that NOT what I'm looking for? I followed the Libby instructions to obtain the code.

So the plugin I installed today is not current?

There has been updates done to Libby app by their team so there has been few workarounds given by people who managed to find out how to solve it. I suggest you read carefully the last several pages. However it's broken again as per Sept 25 so it's moot to try to install it anyway.

[sgmoore]

Originally Posted by Ellsinore

So the plugin I installed today is not current?

Depends on where you installed it from.

Since ping (who wrote this plugin) is not around, the official plugin no longer works and you need to use my patched version from https://github.com/sgmoore/libby-calibre-plugin

This fixes the certificate error, but does not fix other issues. In particular, it does not allow you to download books or magazines and you still need to get the token manually.

Features that still work are - viewing your current loans and holds, searching for books, borrowing, placing holds and returning books.

[foosion]

Originally Posted by miss_p1nky

There has been updates done to Libby app by their team so there has been few workarounds given by people who managed to find out how to solve it. I suggest you read carefully the last several pages. However it's broken again as per Sept 25 so it's moot to try to install it anyway.

[emphasis added]

I find it useful for searching for books, putting on hold (if applicable) and borrowing.

[lumping-sugar66]

I'm afraid with both the manual token grabbing and the new patch, the book downloads are back to being unusable. With these patches, I can now see the borrowed books, search for new books (I'm willing to bet borrowing works as well). But after attempting to download a book on loan, it fails with the same message.

calibre, version 7.10.0
ERROR: Unhandled exception: <b>ClientForbiddenError</b>: Failed to download e-book<p>HTTP Error 403: Forbidden</p>

calibre 7.10  embedded-python: True
Windows-10-10.0.19042-SP0 Windows ('64bit', 'WindowsPE')
('Windows', '10', '10.0.19042')
Python 3.11.5
Windows: ('10', '10.0.19042', 'SP0', 'Multiprocessor Free')
Interface language: None
EXE path: C:\Program Files\Calibre2\calibre.exe
Successfully initialized third party plugins: DeACSM (0, 0, 16) && DeDRM (10, 0, 9) && Annotations (1, 17, 13) && Count Pages (1, 13, 6) && EpubMerge (3, 2, 0) && EpubSplit (3, 9, 0) && Extract ISBN (1, 6, 5) && Goodreads (1, 8, 2) && Goodreads Sync (1, 16, 8) && KOReader Sync (0, 6, 7) && Kobo Utilities (2, 16, 13) && KoboTouchExtended (3, 6, 7) && OverDrive Libby (0, 1, 9)
Traceback (most recent call last):
  File "calibre_plugins.overdrive_libby.libby.client", line 520, in send_request
  File "urllib\request.py", line 525, in open
  File "urllib\request.py", line 634, in http_response
  File "urllib\request.py", line 563, in error
  File "urllib\request.py", line 496, in _call_chain
  File "urllib\request.py", line 643, in http_error_default
urllib.error.HTTPError: HTTP Error 403: Forbidden

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "calibre\gui2\threaded_jobs.py", line 85, in start_work
  File "calibre_plugins.overdrive_libby.ebook_download", line 50, in __call__
  File "calibre_plugins.overdrive_libby.ebook_download", line 94, in _custom_download
  File "calibre_plugins.overdrive_libby.libby.client", line 808, in fulfill_loan_file
  File "calibre_plugins.overdrive_libby.libby.client", line 540, in send_request
  File "calibre_plugins.overdrive_libby.libby.errors", line 143, in process
calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError: <calibre_plugins.overdrive_libby.libby.errors.ClientForbiddenError; http_status=403, msg='HTTP Error 403: Forbidden', error_response=' ''>

[Ellsinore]

Originally Posted by lumping-sugar66

I'm afraid with both the manual token grabbing and the new patch, the book downloads are back to being unusable.

Since that's exactly what I want it for, I can save some time. Thanks!