NanoClock: Yet another persistent clock - Page 11

NiLuJe · 01-23-2022, 08:08 PM

Flipping the uninstall switch in the settings will immediately self-destruct all the things, as well as archive your current config, no need to resort to anything more drastic

.

(On that device, you don't even need to reboot, although I'd still recommend doing that ASAP after a uninstall

).

Deobulakenyo · 01-23-2022, 08:34 PM

Quote:

Originally Posted by NiLuJe

Flipping the uninstall switch in the settings will immediately self-destruct all the things, as well as archive your current config, no need to resort to anything more drastic

.

(On that device, you don't even need to reboot, although I'd still recommend doing that ASAP after a uninstall

).

Thank you very much as always

Edit: I uninstalled nanoclock and now my Libra 2 boots and reboots fine. I hope nanoclock gets fixed. I really like that utility.

albare · 01-24-2022, 12:04 PM

Thanks!!!!
Is working again in Kobo Sage.

Enviado desde mi SM-A705FN mediante Tapatalk

Steven Karp · 01-25-2022, 01:51 PM

Quote:

Originally Posted by NiLuJe

Barring that, it's probably much faster to just play with the `fbink` binary in an SSH shell. (Or not, since, you know, requires a shell ;p).

Yeah, I keep my device as close to factory as I can stand. In fact, now that I think about it, nanoclock is the only deviation currently installed.

As for the font question, I bit the bullet and looked into the TrueType side of things, since those fonts I can easily preview on the computer. Wound up going with Fontin-Regular. Doesn't match anything else on the device, but that may actually be a good thing: the different font means my brain can easily file the clock as "not part of the book, ostracize it" while I'm reading.

poczynek · 02-05-2022, 01:28 AM

I had to factory reset my Forma. Even after I did this and there is no Nanoclock folder it is still showing up flashing occasionally?

I then tried installing nanoclock again and then using 'uninstall' in the config file however even after this (and turning off and on) it still flashes up occasionally.

How can i uninstall?

NiLuJe · 02-05-2022, 12:07 PM

Depending on which kind of factory reset you did, it might not have any any effect on this, except possibly breaking the uninstall ;p.

Either re-install it sanely, and then uninstall it sanely; or do a *full* (manual) factory reset.

poczynek · 02-07-2022, 03:27 AM

Quote:

Originally Posted by NiLuJe

Depending on which kind of factory reset you did, it might not have any any effect on this, except possibly breaking the uninstall ;p.

Either re-install it sanely, and then uninstall it sanely; or do a *full* (manual) factory reset.

Yes so I installed it again. Then uninstalled it. And voila - it is gone!

However i then re-installed it - because i love using it but didn't want it to flash my adjusted bookerly fonted one with the default one. And it has flashed again! So it is now showing my one i set up plus the default one!

I can only think it's something in my config file attached?

NiLuJe · 02-07-2022, 08:49 AM

Define "flash"?

poczynek · 02-07-2022, 04:59 PM

Quote:

Originally Posted by NiLuJe

Define "flash"?

Ok so the one i changed via the config file to show top left in bookerly is all good. But then if i press on a page i get that one - excellent - but also the default one as well. See photo attached.

NiLuJe · 02-07-2022, 06:19 PM

Oh, right, you'll just need a full page refresh to get rid of the remnants of the old layout if it happened to take more space

.

(Switching to/from the Settings page should do the trick

).

LDB · 02-07-2022, 06:20 PM

Quote:

Originally Posted by poczynek

Ok so the one i changed via the config file to show top left in bookerly is all good. But then if i press on a page i get that one - excellent - but also the default one as well. See photo attached.

Australia? Or somewhere else that is tomorrow afternoon? Good luck getting it sorted.

poczynek · 02-07-2022, 06:22 PM

Quote:

Originally Posted by NiLuJe

Oh, right, you'll just need a full page refresh to get rid of the remnants of the old layout if it happened to take more space

.

(Switching to/from the Settings page should do the trick

).

Yes it comes up if i press the screen and then only once. However it will happen each time if only until i turn the page in a book for instance. It's no big deal really just a bit weird why it's happening.

poczynek · 02-07-2022, 06:22 PM

Quote:

Originally Posted by LDB

Australia? Or somewhere else that is tomorrow afternoon? Good luck getting it sorted.

Yes in Sydney! Morning here at the moment. Currently raining.

NiLuJe · 02-07-2022, 08:18 PM

Wait, you mean to say that it's showing *both* on *every* refresh, not just the first one after updating the config?

poczynek · 02-08-2022, 02:47 AM

Quote:

Originally Posted by NiLuJe

Wait, you mean to say that it's showing *both* on *every* refresh, not just the first one after updating the config?

Yes so the first time i press the screen to refresh it comes up once with both.

Then on reading a book the very first time i start reading on the first page it comes up both and then after that it is only once and all ok.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cover images not persistent	gogu1904	Kobo Reader	5	08-21-2020 11:55 AM
PW2 jailbreak not persistent	chrnit	Kindle Developer's Corner	3	01-06-2017 09:16 PM
Persistent Display?	jessie102	Sony Reader	2	03-08-2010 10:45 PM
Persistent WIFI connection.	tovarish	iRex	2	11-16-2009 04:30 AM

01-23-2022, 08:08 PM	#151
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Flipping the uninstall switch in the settings will immediately self-destruct all the things, as well as archive your current config, no need to resort to anything more drastic . (On that device, you don't even need to reboot, although I'd still recommend doing that ASAP after a uninstall ).

01-24-2022, 12:04 PM	#153
albare Connoisseur Posts: 62 Karma: 3010 Join Date: Feb 2019 Device: kobo h2o	Thanks!!!! Is working again in Kobo Sage. Enviado desde mi SM-A705FN mediante Tapatalk

02-05-2022, 01:28 AM	#155
poczynek Zealot Posts: 114 Karma: 26552 Join Date: Jan 2017 Device: Kobo Forma	I had to factory reset my Forma. Even after I did this and there is no Nanoclock folder it is still showing up flashing occasionally? I then tried installing nanoclock again and then using 'uninstall' in the config file however even after this (and turning off and on) it still flashes up occasionally. How can i uninstall?

02-05-2022, 12:07 PM	#156
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Depending on which kind of factory reset you did, it might not have any any effect on this, except possibly breaking the uninstall ;p. Either re-install it sanely, and then uninstall it sanely; or do a full (manual) factory reset.

02-07-2022, 08:49 AM	#158
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Define "flash"?

02-07-2022, 06:19 PM	#160
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Oh, right, you'll just need a full page refresh to get rid of the remnants of the old layout if it happened to take more space . (Switching to/from the Settings page should do the trick ).

02-07-2022, 08:18 PM	#164
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Wait, you mean to say that it's showing both on every refresh, not just the first one after updating the config?