Can't Register

rabbie22 · 10-13-2017, 01:05 PM

I am UK based and have a nook glowlight( not simple touch)model BNRV500 which I have had to reset. When I get to the registration page it now comes up with an error message because this model is UK and the resistration address for B & N no longer exists. I now have a nook which works perfectly well but I cannot use it because it fails to register. I would be grateful if anyone could advise on potential solutions.

Thanks

geertm · 10-13-2017, 01:35 PM

Quote:

Originally Posted by rabbie22

I am UK based and have a nook glowlight( not simple touch)model BNRV500 which I have had to reset. When I get to the registration page it now comes up with an error message because this model is UK and the resistration address for B & N no longer exists. I now have a nook which works perfectly well but I cannot use it because it fails to register. I would be grateful if anyone could advise on potential solutions.

Thanks

I assume this would still work:
https://forum.xda-developers.com/noo...-oobe-t2858282

rabbie22 · 10-13-2017, 05:33 PM

Thanks Geertm. I have already tried this but could not get it to work.

gbm · 10-13-2017, 08:11 PM

1. Turn on your NOOK.
2. At the welcome screen hold down the button on the top right (page turn button) and at the same time slide your finger across the top of the screen from left to right.
3. You should now see a Factory link on the top left of the screen, press this link.
4. On the factory screen hold down the same button (top right) and at the same time tap the bottom right of the screen.
5. You should now see a Skip Oobe link on the bottom right, press this link.
6. You will now be able to use the Nook Simple Touch without registration.

This worked for me just now.

If that does not work then try this:

This will actually restore it to the same exact way you got it from the store. It's the equivalent of restoring your computer with your installations disks.
Turn off your nook completely. If you are at the "home" screen then hold power button for 3 seconds and choose "Power off" when prompted. If you are in the screen-saver mode then hold power button for 10 seconds until screen will freeze or go blank, or text "Your nook is switched off" will appear.
With it off, hold the power button until the screen flickers black for a moment THEN CONTINUE to hold it for another 15 seconds. You won't see anything happen at this point - but the animated arrows will stop typically.
Repeat the above step 6 times in a row. YES, Six is the magic number that tells the nook to do a restore. At the six time screen will get half white- half black and it's a good sign!
Now press the Power Button once to turn on the nook. The touch screen will go black with a description of what it's doing (restoring). This may take several minutes - do NOT stop it.
After you have it back to factory mode, do the following:
Nook Simple Touch/Factory Mode/Skip Out of Box Experience
On a virgin/factory reset Nook Simple Touch, there's a "Factory" screen that displays various bits about the device, such as model, serial number, MAC address, public key, etc.
After powering on the Nook, you should be presented with a welcome screen with a Next button in the lower right. A "Factory" button will appear in the top left of the screen. Tap it to get to the Factory screen. Skip Oobe (Out-of-box Experience)
While on the Factory screen, hold down the top right button and tap in the bottom right of the screen. A "Skip Oobe" button appears. Tap it to completely bypass the time zone, Wi-Fi and B&N registration process.

bernie

haertig · 10-18-2017, 06:25 PM

Did you call B&N? Do they still exist in the UK? What did they say?

If you're network-savvy, I wonder if it would register to a US-based B&N site? Maybe you could trick your Nook by hardcoding a US IP address for B&N registration into the hosts file on your router (spoof the DNS lookup that is evidently sending you to a dead UK-based B&N site). You could use a packet sniffer to determine the UK-based B&N domain name that the Nook is currently trying to connect to, so you know what you need to spoof. Finding the US-based B&N registration IP address would be tougher though.

A phone call to B&N would probably be easier. They can probably manually register it on their end, if they're willing.

10-13-2017, 01:05 PM	#1
rabbie22 Junior Member Posts: 2 Karma: 10 Join Date: Oct 2017 Device: Nook Glowlight	Can't Register I am UK based and have a nook glowlight( not simple touch)model BNRV500 which I have had to reset. When I get to the registration page it now comes up with an error message because this model is UK and the resistration address for B & N no longer exists. I now have a nook which works perfectly well but I cannot use it because it fails to register. I would be grateful if anyone could advise on potential solutions. Thanks

10-13-2017, 08:11 PM	#4
gbm Wizard Posts: 2,215 Karma: 8888888 Join Date: Jun 2010 Device: Kobo Clara HD,Hisence Sero 7 Pro RIP, Nook STR, jetbook lite	1. Turn on your NOOK. 2. At the welcome screen hold down the button on the top right (page turn button) and at the same time slide your finger across the top of the screen from left to right. 3. You should now see a Factory link on the top left of the screen, press this link. 4. On the factory screen hold down the same button (top right) and at the same time tap the bottom right of the screen. 5. You should now see a Skip Oobe link on the bottom right, press this link. 6. You will now be able to use the Nook Simple Touch without registration. This worked for me just now. If that does not work then try this: This will actually restore it to the same exact way you got it from the store. It's the equivalent of restoring your computer with your installations disks. Turn off your nook completely. If you are at the "home" screen then hold power button for 3 seconds and choose "Power off" when prompted. If you are in the screen-saver mode then hold power button for 10 seconds until screen will freeze or go blank, or text "Your nook is switched off" will appear. With it off, hold the power button until the screen flickers black for a moment THEN CONTINUE to hold it for another 15 seconds. You won't see anything happen at this point - but the animated arrows will stop typically. Repeat the above step 6 times in a row. YES, Six is the magic number that tells the nook to do a restore. At the six time screen will get half white- half black and it's a good sign! Now press the Power Button once to turn on the nook. The touch screen will go black with a description of what it's doing (restoring). This may take several minutes - do NOT stop it. After you have it back to factory mode, do the following: Nook Simple Touch/Factory Mode/Skip Out of Box Experience On a virgin/factory reset Nook Simple Touch, there's a "Factory" screen that displays various bits about the device, such as model, serial number, MAC address, public key, etc. After powering on the Nook, you should be presented with a welcome screen with a Next button in the lower right. A "Factory" button will appear in the top left of the screen. Tap it to get to the Factory screen. Skip Oobe (Out-of-box Experience) While on the Factory screen, hold down the top right button and tap in the bottom right of the screen. A "Skip Oobe" button appears. Tap it to completely bypass the time zone, Wi-Fi and B&N registration process. bernie Last edited by gbm; 10-13-2017 at 08:16 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Register K4 NT without Wi-Fi	geekyworld	Kindle Developer's Corner	4	05-10-2013 07:09 AM
Must Register?	JayCook	Fictionwise eBookwise	18	12-31-2012 08:42 PM
Un-register/Re-register Nook Classic	Hitchcockfan	Barnes & Noble NOOK	1	08-29-2011 07:53 AM
To register or not?	DarkRose	Amazon Kindle	19	08-24-2011 09:11 PM
how to de-register and register kindle3 outside USA	klastbreath	Amazon Kindle	3	03-31-2011 07:07 PM

10-13-2017, 05:33 PM	#3
rabbie22 Junior Member Posts: 2 Karma: 10 Join Date: Oct 2017 Device: Nook Glowlight	Thanks Geertm. I have already tried this but could not get it to work.

10-18-2017, 06:25 PM	#5
haertig Wizard Posts: 1,941 Karma: 34855886 Join Date: Sep 2017 Device: PW3, Galaxy Tab A9+, Moto G7	Did you call B&N? Do they still exist in the UK? What did they say? If you're network-savvy, I wonder if it would register to a US-based B&N site? Maybe you could trick your Nook by hardcoding a US IP address for B&N registration into the hosts file on your router (spoof the DNS lookup that is evidently sending you to a dead UK-based B&N site). You could use a packet sniffer to determine the UK-based B&N domain name that the Nook is currently trying to connect to, so you know what you need to spoof. Finding the US-based B&N registration IP address would be tougher though. A phone call to B&N would probably be easier. They can probably manually register it on their end, if they're willing.

Advert

Advert