Kobo Aura ONE Third Party Cover Thread - Page 10

allovertheglobe · 10-17-2016, 12:37 AM

Quote:

Originally Posted by jackie_w

It's not actually in the frame. Start from the very bottom right of the screen (the lighted part not the bezel) and it's roughly an inch up and an inch left from there.

My experience with temporary home-made solutions is that the magnet needs to be quite strong, but not so strong that it also switches the device on/off if you fold the front cover to the back when reading.

Thanks for the info, today I stopped by Home Depot, got some small neodymium disks, and after a while I found the exact spot, which happens to be where that small pocket in the front cover is, so that worked out very well! And I checked folding over, the cover's way too thick for that to be an issue.

I did however notice how picky the KA1 is, and somehow registers a magnet like finger touch, flipping pages or even highlighting things when I pushed it around... now I can understand much better why people are having so many issues with the official sleep cover, the slightest disturbance (like lying on a metal table) and it registers as something different from the intended sleep switch

Sweetpea · 10-17-2016, 05:49 AM

Quote:

Originally Posted by alizarin

After reading this thread, I now feel hopelessly inadequate because all I got for my KA1 was this

but it does the job well, especially since I like reading without a cover.

I never cared for sleeves for any device, personally. But it's not about price at all (if you can spare the money, naturally). For me, it's mostly function. And I'll pay for function with an awesome look

I was all ready to buy a gecko cover (didn't care for the original kobo cover at all) except that it wasn't a slimfit cover. Which is the "function" I wanted. Combine that with some quality leather cover and I'm hooked...

Quote:

Originally Posted by Katsunami

"Expensive" is a matter of perspective. Many women I know don't even blink at €60 for a purse. To them, it's (probably) important to have something like that, and if they can afford it, they buy it. I don't; my wallet costs something like €20, and I still think it's €19.05 too much

My wallet ws more expensive! But then, it's also real (Dutch) leather

Quote:

One of the reasons I can buy covers (and readers) any time I want, at almost any price point is because I don't buy a €700 mobile phone every other year, and don't smoke or drink.

Sixty Schmixty. It's all priorities.

True that. And only every other year? When I hear some people talk, they buy one every year! I think I'll stick with my €700 mobile phone (yes, I splurged last year, but only because I really wanted that 5.5" screen and boy am I happy I didn't wait for the Galaxy Note 7, which was on my wishlist as well...) for a few more years to come.

Quote:

Oberon covers are nice looking, but they really should get on the ball and start creating slim-fit ones; or at least ones that support the wake/sleep function and don't need elastic bands to hold the reader in.

True! Those covers are awesome, but those elastic bands...

Quote:

Originally Posted by Willa

Who were willing to admit it!

I wonder if Noreve noticed an increase in site visitations and orders since the first person linked it here

Terisa de morgan · 10-17-2016, 05:56 AM

Quote:

Originally Posted by Willa

Who were willing to admit it!

I haven't got it yet, but perhaps in Christmas....

dnastase · 10-17-2016, 05:58 AM

Quote:

Originally Posted by allovertheglobe

Thanks for the info, today I stopped by Home Depot, got some small neodymium disks, and after a while I found the exact spot, which happens to be where that small pocket in the front cover is, so that worked out very well! And I checked folding over, the cover's way too thick for that to be an issue.

I did however notice how picky the KA1 is, and somehow registers a magnet like finger touch, flipping pages or even highlighting things when I pushed it around... now I can understand much better why people are having so many issues with the official sleep cover, the slightest disturbance (like lying on a metal table) and it registers as something different from the intended sleep switch

Sounds like some 3rd party covers are actually nicer and better than the official one. And way less expensive !

Katsunami · 10-17-2016, 07:05 AM

Last Friday or so I received an e-mail from Norève that my cover would take 4 working days to be delivered. That would be next Thursday.

I seem to remember reading on the site somewhere, a long time ago, that the Smooth Black leather with black lining is their 'default cover'; it's the 'cheapest' (apart from the PU one, which is only €10 less...), and they are always making that one. Anything else regarding color or leather style is made to order and will take 2-3 weeks.

Terisa de morgan · 10-17-2016, 09:20 AM

Quote:

Originally Posted by Katsunami

Last Friday or so I received an e-mail from Norève that my cover would take 4 working days to be delivered. That would be next Thursday.

I seem to remember reading on the site somewhere, a long time ago, that the Smooth Black leather with black lining is their 'default cover'; it's the 'cheapest' (apart from the PU one, which is only €10 less...), and they are always making that one. Anything else regarding color or leather style is made to order and will take 2-3 weeks.

Yes, my orange camera cover took more or less that time

Aelirenn · 10-18-2016, 05:45 AM

I hope you guys will post photos of your covers, it could help others (like me

) decide

I plan to buy Kobo Aura One and a cover for it (should be dedicated (the ones with corner clips are terrible), have sleep/wake function and good looks

)
Noreve look great, but the price

But they are so nice...
I like pretty things and can't help it, my budget often suffers from it

Katsunami · 10-18-2016, 06:22 AM

Last Friday Norève sent me a confirmation e-mail that delivery of the cover would take 4 working days: around 20-10-2016. Therefore I expect to receive the cover either at the end of this week, or the beginning of next week. I'll post some pictures after I get it (assuming I like it).

edit: it's not the 20th, so I'm expecting the cover to be sent and/or received in a few days.

Partycrash00 · 10-20-2016, 10:28 AM

I have this one:
https://www.reboon.de/en/booncover-s?number=5000

Because I love to read it without a cover at home. Then I only have this piece of velcro at the back and thats it.

On tour I just "glue" it to the cover and off I go.

Sometimes (but not too often) I even use the stand functionality.

Terisa de morgan · 10-20-2016, 12:35 PM

I don't know if this cover has been shown here

Poppaea · 10-20-2016, 02:32 PM

Quote:

Originally Posted by Terisa de morgan

I don't know if this cover has been shown here

Jepp, I did. So no one can accuse me of emtying your pockets

I gave y'all a choice

Terisa de morgan · 10-20-2016, 03:24 PM

Quote:

Originally Posted by Poppaea

Jepp, I did. So no one can accuse me of emtying your pockets

I gave y'all a choice

I didn't remember

I've just seen it in Amazon... and some quite nice in aliexpress

Katsunami · 10-20-2016, 03:24 PM

Quote:

Originally Posted by Partycrash00

I have this one:
https://www.reboon.de/en/booncover-s?number=5000

Because I love to read it without a cover at home. Then I only have this piece of velcro at the back and thats it.

On tour I just "glue" it to the cover and off I go.

Sometimes (but not too often) I even use the stand functionality.

€40+? That's a serious amount of money for a flap and some velcro to be honest.

Poppaea · 10-21-2016, 02:06 AM

Quote:

Originally Posted by Terisa de morgan

I didn't remember

I've just seen it in Amazon... and some quite nice in aliexpress

You didn't remember because there was some considerably difference between the cover shown now and then.

They had some photoshopped covers. Three of them with the frame to hold the device and the red one without the frame and visible magnets. We were all wondering which one would get in the end, remember?

Then they cleaned up their act and now there even is a white one. Same happened on ebay and aliexpress. Looks to me like there is one manufacturer whith whom they all buy their stock.

I ordered one of these via ebay from China because it was cheaper back at the time, but am still waiting for it to be delivered. In the meantime Noreve decided to do a cover for the ONE and now I am waiting for theirs, too.

anacreon · 10-21-2016, 02:30 AM

I was intrigued by this https://www.amazon.co.uk/gp/product/B01HCVIFZ6/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2N58YCCQ NSUNR but didn't order it since I saw no space for the blue button at the back. Pity since I was very interested in the weight (82g), I liked the look (the dark colour), hoped the feel was better than the plastic, and didn't mind the absence of the sleep cover function which I don't use. I wrote to them about it since I think it misleading to advertise it as a Aura One cover.

The "ecological" tag is the usual ridiculous claim for something made mostly of synthetic material.

10-17-2016, 07:05 AM	#140
Katsunami Grand Sorcerer Posts: 6,111 Karma: 34000001 Join Date: Mar 2008 Device: KPW1, KA1	Last Friday or so I received an e-mail from Norève that my cover would take 4 working days to be delivered. That would be next Thursday. I seem to remember reading on the site somewhere, a long time ago, that the Smooth Black leather with black lining is their 'default cover'; it's the 'cheapest' (apart from the PU one, which is only €10 less...), and they are always making that one. Anything else regarding color or leather style is made to order and will take 2-3 weeks. Last edited by Katsunami; 10-17-2016 at 07:08 AM.

10-18-2016, 06:22 AM	#143
Katsunami Grand Sorcerer Posts: 6,111 Karma: 34000001 Join Date: Mar 2008 Device: KPW1, KA1	Last Friday Norève sent me a confirmation e-mail that delivery of the cover would take 4 working days: around 20-10-2016. Therefore I expect to receive the cover either at the end of this week, or the beginning of next week. I'll post some pictures after I get it (assuming I like it). edit: it's not the 20th, so I'm expecting the cover to be sent and/or received in a few days. Last edited by Katsunami; 10-20-2016 at 04:55 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aura ONE Kobo Aura One owners thread	pagepack	Kobo Reader	1402	09-05-2025 12:52 AM
Aura NEW Kobo Aura Impressions Thread!	Canuck_in_Japan	Kobo Reader	745	02-10-2017 04:54 AM
Aura HD Kobo Glo/Aura/Aura HD future firmware feature request thread	arspr	Kobo Reader	25	03-26-2015 05:19 AM
Aura HD Kobo Aura HD Impressions Thread	Canuck_in_Japan	Kobo Reader	731	04-03-2014 05:46 AM
Third party cases or sleeves for Kobo Aura, please?	peterwardgd	Kobo Reader	35	10-27-2013 03:36 PM

10-18-2016, 05:45 AM	#142
Aelirenn Bookworm Posts: 13 Karma: 2087212 Join Date: Oct 2016 Device: Forma, KA1, KAH2O, Voyage, Paperwhite	I hope you guys will post photos of your covers, it could help others (like me ) decide I plan to buy Kobo Aura One and a cover for it (should be dedicated (the ones with corner clips are terrible), have sleep/wake function and good looks ) Noreve look great, but the price But they are so nice... I like pretty things and can't help it, my budget often suffers from it

10-20-2016, 10:28 AM	#144
Partycrash00 Member Posts: 14 Karma: 14644 Join Date: Feb 2010 Location: Germany Device: Kobo Aura H2O, Pocketbook Touch Lux, Pocketbook Ultra	I have this one: https://www.reboon.de/en/booncover-s?number=5000 Because I love to read it without a cover at home. Then I only have this piece of velcro at the back and thats it. On tour I just "glue" it to the cover and off I go. Sometimes (but not too often) I even use the stand functionality.

10-20-2016, 12:35 PM	#145
Terisa de morgan Grand Sorcerer Posts: 6,686 Karma: 12595249 Join Date: Jun 2009 Location: Madrid, Spain Device: Kobo Clara/Aura One/Forma,XiaoMI 5, iPad, Huawei MediaPad, YotaPhone 2	I don't know if this cover has been shown here

10-21-2016, 02:30 AM	#150
anacreon Guru Posts: 978 Karma: 3475832 Join Date: May 2012 Location: France Device: Elipsa, Sage, Libra 2	I was intrigued by this https://www.amazon.co.uk/gp/product/B01HCVIFZ6/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A2N58YCCQ NSUNR but didn't order it since I saw no space for the blue button at the back. Pity since I was very interested in the weight (82g), I liked the look (the dark colour), hoped the feel was better than the plastic, and didn't mind the absence of the sleep cover function which I don't use. I wrote to them about it since I think it misleading to advertise it as a Aura One cover. The "ecological" tag is the usual ridiculous claim for something made mostly of synthetic material.