Kobo Patcher - Page 29

ewphoenix123 · 11-15-2013, 12:07 PM

Quote:

Originally Posted by lohtse

used version 9 of patch on my touch with fw 3 and now in some books the margins are uneven..Left side theres a gap and right side the text is of the screen ie for with then become fo.... have to adjust margin in the settings but then I have a large left margin and small right margin!!! so damn annoying !!! may have to reinstall fw 3 to fix unless someone has a suggestion...

Here is your poblem in the kpg.conf, just change the last 5 to 0 for even margins, create the patch file again and reapply.

<Patch>
patch_name = `Margins fine tuning`
patch_enable = `yes`
# Initial replaces
replace_bytes = AD5C86, 19 46, 00 21
replace_bytes = AD5C88, 1A 46, 00 22
# Values for replace
# Left margin
replace_int = AD5C86, 0, 5
# Top margin
replace_int = AD5C88, 0, 10
</Patch>

GeoffR · 11-15-2013, 12:19 PM

deleted

DNSB · 11-15-2013, 01:26 PM

Up to a short while back, I considered most of the comments about Kobo trying to block hackers from modifying their code as paranoia and/or conspiracy theory.

After all, zlib does offer a saving in space so that might be an excuse for the earlier changes. Now that Kobo has gone to using XOR to obfuscate the code, some of those conspiracy theories are beginning to sound rather likely. The only use for XOR is to hide information though not very well.

Regards,
David

lohtse · 11-15-2013, 02:05 PM

Quote:

Originally Posted by ewphoenix123

Here is your poblem in the kpg.conf, just change the last 5 to 0 for even margins, create the patch file again and reapply.

<Patch>
patch_name = `Margins fine tuning`
patch_enable = `yes`
# Initial replaces
replace_bytes = AD5C86, 19 46, 00 21
replace_bytes = AD5C88, 1A 46, 00 22
# Values for replace
# Left margin
replace_int = AD5C86, 0, 5
# Top margin
replace_int = AD5C88, 0, 10
</Patch>

arrrr ok but will that solve another issue as with default settings have also notice lines of text miss or half of the bottom of the page?

jackie_w · 11-15-2013, 02:06 PM

Unfortunately, "keep 'em out" seems to be the current vogue with the big companies. Sony eventually closed down the PRST2 and I'm not aware any hacking at all has been possible with the PRST3. The new Kindle PW2 hasn't been jailbroken yet (unless you're handy with a soldering iron!) ... and now Kobo seem to be at it.

I wonder why they all think this will sell more devices and make their existing customers happier? As far as I can see it's likely to do the exact opposite or drive people to give up on eink in favour of small tablets.

skip_sands · 11-15-2013, 02:28 PM

Has anyone tried the 09 patch on the new aura (not HD)? Does it work?

GeoffR · 11-15-2013, 02:35 PM

Quote:

Originally Posted by lohtse

arrrr ok but will that solve another issue as with default settings have also notice lines of text miss or half of the bottom of the page?

Are you sure you want to apply the `Margins fine tuning` patch at all? I think the only use for this patch is to correct a device that has an off-centre screen. If your screen is OK then just disable it.

Some of the patches are only useful to people with specific requirements, unless you are certain that you need a partcular patch you should disable it before running kpg.exe. For example the `Wifi insomnia` patch will not be useful for most people, it will just drain your battery.

Quote:

Originally Posted by skip_sands

Has anyone tried the 09 patch on the new aura (not HD)? Does it work?

The 09 patch is for firmware 3.0.0, but this firmware version is not available for the new Aura yet, only for the Touch/Glo/AuraHD.

ShellShock · 11-15-2013, 03:00 PM

Quote:

Originally Posted by DNSB

Up to a short while back, I considered most of the comments about Kobo trying to block hackers from modifying their code as paranoia and/or conspiracy theory.

After all, zlib does offer a saving in space so that might be an excuse for the earlier changes. Now that Kobo has gone to using XOR to obfuscate the code, some of those conspiracy theories are beginning to sound rather likely. The only use for XOR is to hide information though not very well.

I don't know whether to be impressed that Metazoa cracked it so quickly, or not surprised at all, as XOR is a notoriously poor choice for obfuscation/encryption. Anyway I did not think of XOR, so hats off to Metazoa.

If Kobo really want to stop this hacking, then perhaps they should make the firmware more configurable, and thus remove the need for the patcher. If they don't want to do that, then for heaven's sake leave the door open for us to patch it.

DNSB · 11-15-2013, 06:09 PM

Quote:

Originally Posted by skip_sands

Has anyone tried the 09 patch on the new aura (not HD)? Does it work?

I tested it on one Aura and it worked. Please, make sure to use the right firmware version.

Regards,
David

DNSB · 11-15-2013, 06:15 PM

Quote:

Originally Posted by GeoffR

Are you sure you want to apply the `Margins fine tuning` patch at all? I think the only use for this patch is to correct a device that has an off-centre screen. If your screen is OK then just disable it.

On my Aura HD, I disabled that patch, on my wife's Aura, I set the left to 0 and left the top at 10 -- she was complaining the text started too close to the top of the screen.

Quote:

Originally Posted by GeoffR

The 09 patch is for firmware 3.0.0, but this firmware version is not available for the new Aura yet, only for the Touch/Glo/AuraHD.

Actually, the 09 patch come with configuration files and copies of libnickel.so.1.0.0 for 2.61, 2.8.1 (original not B), 2.10.0 and 3.0.0 firmwares.

Regards,
David

dmapr · 11-15-2013, 06:22 PM

metazoa has also mentioned that he hasn't forgotten the request to ignore the CSS styles but doesn't know when he'll be able to get to it.

dmapr · 11-15-2013, 10:42 PM

If anyone is using the line spacing patch, does it work for you on the 2.10.0/3.0.0 firmware? For me as soon as I touch the slider it reverts back to Kobo default values. I ended up going back to 2.8.1 because of that.

henriquemaia · 11-15-2013, 11:46 PM

I'm using a patched 3.0.0 on a Kobo Glo, and the line spacing slider is working as expected. No surprises here.

DNSB · 11-16-2013, 12:56 AM

Quote:

Originally Posted by dmapr

If anyone is using the line spacing patch, does it work for you on the 2.10.0/3.0.0 firmware? For me as soon as I touch the slider it reverts back to Kobo default values. I ended up going back to 2.8.1 because of that.

I just checked with an Aura HD with FW 3.0.0 and the line height went from 0.9 to 1.35 when I moved the slider (checking the value stored in KoboeReader.conf after making changes). I didn't see any changes in the ebook since I set all the line heights from the stylesheet.

Regards,
David

dmapr · 11-16-2013, 01:56 AM

Quote:

Originally Posted by henriquemaia

I'm using a patched 3.0.0 on a Kobo Glo, and the line spacing slider is working as expected. No surprises here.

So if you move the slider all the way to the right you don't get the ~3 lines worth of spacing?

Quote:

Originally Posted by DNSB

I just checked with an Aura HD with FW 3.0.0 and the line height went from 0.9 to 1.35 when I moved the slider (checking the value stored in KoboeReader.conf after making changes). I didn't see any changes in the ebook since I set all the line heights from the stylesheet.

Regards,
David

Thanks, does that change correspond to a single notch on the slider or did you move it all the way?

11-15-2013, 01:26 PM	#423
DNSB Bibliophagist Posts: 48,001 Karma: 174315100 Join Date: Jul 2010 Location: Vancouver Device: Kobo Sage, Libra Colour, Lenovo M8 FHD, Paperwhite 4, Tolino epos	An apology to the conspiracy theorists Up to a short while back, I considered most of the comments about Kobo trying to block hackers from modifying their code as paranoia and/or conspiracy theory. After all, zlib does offer a saving in space so that might be an excuse for the earlier changes. Now that Kobo has gone to using XOR to obfuscate the code, some of those conspiracy theories are beginning to sound rather likely. The only use for XOR is to hide information though not very well. Regards, David

11-15-2013, 06:22 PM	#431
dmapr Evangelist Posts: 469 Karma: 600816 Join Date: Sep 2009 Device: Kobo Aura HD, Kobo Aura One	metazoa has also mentioned that he hasn't forgotten the request to ignore the CSS styles but doesn't know when he'll be able to get to it. Last edited by dmapr; 11-15-2013 at 06:25 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Glo How to import reading Life Statistics from Kobo Touch to Kobo Glo?	the_m	Kobo Reader	5	12-13-2012 03:40 PM
$25 gift card w. purchase of Kobo Touch or Kobo Vox at Frys	sufue	Deals and Resources (No Self-Promotion or Affiliate Links)	0	07-15-2012 10:39 AM
Touch Kobo Touch defective after 3 months and Kobo Customer Support useless	shaf	Kobo Reader	5	12-04-2011 05:10 PM
Touch Kobo Touch not ejecting cleanly with Calibre OR Kobo Desktop - Windows 7	JBlyth	Kobo Reader	11	08-03-2011 05:38 PM
Kobo Touch not disconnecting properly from Calibre OR Kobo Desktop - Windows 7	JBlyth	Devices	1	08-03-2011 06:50 AM

11-15-2013, 12:19 PM	#422
GeoffR Wizard Posts: 3,821 Karma: 19162882 Join Date: Nov 2012 Location: Te Riu-a-Māui Device: Kobo Glo	deleted

11-15-2013, 02:06 PM	#425
jackie_w Grand Sorcerer Posts: 6,266 Karma: 16544702 Join Date: Sep 2009 Location: UK Device: ClaraHD, Forma, Libra2, Clara2E, LibraCol, PBTouchHD3	Unfortunately, "keep 'em out" seems to be the current vogue with the big companies. Sony eventually closed down the PRST2 and I'm not aware any hacking at all has been possible with the PRST3. The new Kindle PW2 hasn't been jailbroken yet (unless you're handy with a soldering iron!) ... and now Kobo seem to be at it. I wonder why they all think this will sell more devices and make their existing customers happier? As far as I can see it's likely to do the exact opposite or drive people to give up on eink in favour of small tablets.

11-15-2013, 02:28 PM	#426
skip_sands Enthusiast Posts: 26 Karma: 10 Join Date: Apr 2013 Device: Kobo Aura HD, Kindle Paperwhite	Has anyone tried the 09 patch on the new aura (not HD)? Does it work?

11-15-2013, 10:42 PM	#432
dmapr Evangelist Posts: 469 Karma: 600816 Join Date: Sep 2009 Device: Kobo Aura HD, Kobo Aura One	If anyone is using the line spacing patch, does it work for you on the 2.10.0/3.0.0 firmware? For me as soon as I touch the slider it reverts back to Kobo default values. I ended up going back to 2.8.1 because of that.

11-15-2013, 11:46 PM	#433
henriquemaia Ignorant of many things Posts: 63 Karma: 9304 Join Date: Feb 2011 Device: Kobo Libra 2	I'm using a patched 3.0.0 on a Kobo Glo, and the line spacing slider is working as expected. No surprises here.