Small debricking guide for “noobs” - Page 13

smitelya · 02-07-2013, 05:06 PM

sorry but i don't respond from my keyboard and i don't have >
cursor blinking on the new line without possibility to write anything

twobob · 02-07-2013, 05:13 PM

Honestly I have no idea. but that looks like it has at least come to life.

I thought that meant the fastboot via usb interface is now active isn't it?

connect cable. access that way? No?

AFAIK that's the message that pops up when the fastboot mode activates. Which should mean you can now push fastboot instructions to it.

I thought it would expect those instructions via USB at this point. I could WELL be wrong. just my guess

smitelya · 02-07-2013, 05:15 PM

Quote:

Originally Posted by twobob

Honestly I have no idea. but that looks like it has at least come to life.

I thought that meant the fastboot via usb interface is now active isn't it?

connect cable. access that way? No?

AFAIK that's the message that pops up when the fastboot mode activates. Which should mean you can now push fastboot instructions to it.

I thought it would expect those instructions via USB at this point. I could WELL be wrong. just my guess

thank you for reply
i am waiting for advice from knc1

knc1 · 02-07-2013, 05:18 PM

Quote:

Originally Posted by smitelya

thank you for reply
i am waiting for advice from knc1

towbob is correct - you issue fastboot commands with the fastboot tool over the usb cable.

smitelya · 02-07-2013, 05:20 PM

OK i will look for the fastboot tool and will try tomorow
thanks for reply and i will update you regarding my progress

twobob · 02-07-2013, 06:06 PM

Its on the debricking thread.

smitelya · 02-07-2013, 06:08 PM

thanks

twobob · 02-07-2013, 06:09 PM

for windows https://www.mobileread.com/forums/sho....php?p=2001683

smitelya · 02-08-2013, 08:41 AM

Good news
I success to flash the device via fastboot
i flashed all partitions
and restart the device in diag mode
in the first restart device update itself to 5.3.1
now i stuck and cannot exit from it to normal mode

please additional advice

twobob · 02-08-2013, 09:02 AM

Exit DIAGS on a PW.

ermm..

Quote:

You can create the missing XML file by running the first diag in the main diags menu. Then you can disable diags in the exit menu. Also, your battery will continuously discharge while in diags mode, so you should keep it plugged into a charger until you get around to exiting diags properly.

Quote:

Then chose “D) Exit, Reboot or Disable Diags” then “D) Disable Diagnostics” and “Q) To continue”

Slapped together from threads

https://www.mobileread.com/forums/sho...d.php?t=172820
https://www.mobileread.com/forums/sho...d.php?t=200213

I have never done it...

smitelya · 02-08-2013, 09:16 AM

Solution was simple

Put ENABLE_DIAGS in Kindle root and choose Disable Diagnostics
That is all,exactly as in Kindle 5

Kindle return to LIFE
thanks you guys for you help

twobob · 02-08-2013, 09:55 AM

Waboom . Chalk it up

nice one

Thrillseeka · 10-05-2013, 07:55 AM

Hi!

First of all, sorry about my english. So, I have a Kindle4, it was never flashed or anything, now the screen is frozen, i tried hard reseting but didnt worked. I tried it many times. Unfortunatly tha last time i was tried, it was connected via usb to my computer. After this if i trying turn on, or take a hard reset, the turning indicator LED dosnt show anything.

When i connected the kindle to my computer via usb, then i see NS Blank CODEX in the control panel under devices.

If try to charging with wall charger, doest work. When i plugged in, the LED is orange, but some hours later, a kindle turn off, and the LED goes off too.

So i decide to try to fix it, i wana set the default. So i downloaded the Kubrick live cd, but the process is stopped when 'Putting device into Fastboot mode" it say "Waiting for device..." The kindle screen is frozen, how to press next?

How to take a fastboot mode and how to restore my kindle? With the MfgTool.exe i can take it to the all mode,but that is all, i dont know how to restore it default.

Thanks all for help.

Thrillseeka

ixtab · 10-05-2013, 08:08 AM

If you can, please use Kubrick on an *older* computer. Endless "Waiting for device" is most probably caused by a USB3 controller, which isn't currently supported by Kubrick.

Thrillseeka · 10-05-2013, 08:08 AM

I forgot to write, but i tried the Kubrick the real hardware, not from vmware etc.
If i press alt+f2 then logon and write lsusb i see 6 device, the first is:
Bus 001 Device 005: ID 15a2:0052 Freescale Semicoductor, Inc.

The other 5 is Linux Foundation, Dell Computer, Logitech, Linux Foundation, Dell Computer

How to set fastboot moda?

02-07-2013, 05:20 PM	#185
smitelya Member Posts: 19 Karma: 10 Join Date: Jan 2013 Device: Kindle PaperWhite	OK i will look for the fastboot tool and will try tomorow thanks for reply and i will update you regarding my progress Last edited by smitelya; 02-07-2013 at 05:29 PM.

02-08-2013, 09:16 AM	#191
smitelya Member Posts: 19 Karma: 10 Join Date: Jan 2013 Device: Kindle PaperWhite	Solution was simple Put ENABLE_DIAGS in Kindle root and choose Disable Diagnostics That is all,exactly as in Kindle 5 Kindle return to LIFE thanks you guys for you help Last edited by smitelya; 02-08-2013 at 09:32 AM.

10-05-2013, 08:08 AM	#194
ixtab (offline) Posts: 2,907 Karma: 6736094 Join Date: Dec 2011 Device: K3, K4, K5, KPW, KPW2	If you can, please use Kubrick on an older computer. Endless "Waiting for device" is most probably caused by a USB3 controller, which isn't currently supported by Kubrick. Last edited by ixtab; 10-05-2013 at 08:13 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Original "Simple" debricking methods for K5-Touch, K4-Mini, & K3-Keyboard	geekmaster	Kindle Developer's Corner	1383	06-24-2022 06:03 AM
I have some questions about K4 touch debricking	drjonvargas	Kindle Developer's Corner	4	04-22-2012 04:46 PM
kindle touch simple debricking for help	non_fox	Amazon Kindle	4	04-18-2012 09:32 PM
PRS-T1 Rooting and Modding for COMPLETE NOOBS	thoreau	Sony Reader Dev Corner	3	02-06-2012 02:23 PM
A Noobs Guide to Borrowing E-Library Books and Installing non Kobo Bookstore Books	bamelin	Kobo Reader	17	01-07-2012 05:11 PM

02-07-2013, 05:06 PM	#181
smitelya Member Posts: 19 Karma: 10 Join Date: Jan 2013 Device: Kindle PaperWhite	sorry but i don't respond from my keyboard and i don't have > cursor blinking on the new line without possibility to write anything

02-07-2013, 05:13 PM	#182
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299993 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	Honestly I have no idea. but that looks like it has at least come to life. I thought that meant the fastboot via usb interface is now active isn't it? connect cable. access that way? No? AFAIK that's the message that pops up when the fastboot mode activates. Which should mean you can now push fastboot instructions to it. I thought it would expect those instructions via USB at this point. I could WELL be wrong. just my guess

02-07-2013, 06:06 PM	#186
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299993 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	Its on the debricking thread.

02-07-2013, 06:08 PM	#187
smitelya Member Posts: 19 Karma: 10 Join Date: Jan 2013 Device: Kindle PaperWhite	thanks

02-07-2013, 06:09 PM	#188
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299993 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	for windows https://www.mobileread.com/forums/sho....php?p=2001683

02-08-2013, 08:41 AM	#189
smitelya Member Posts: 19 Karma: 10 Join Date: Jan 2013 Device: Kindle PaperWhite	Good news I success to flash the device via fastboot i flashed all partitions and restart the device in diag mode in the first restart device update itself to 5.3.1 now i stuck and cannot exit from it to normal mode please additional advice

02-08-2013, 09:55 AM	#192
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299993 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	Waboom . Chalk it up nice one

10-05-2013, 07:55 AM	#193
Thrillseeka Junior Member Posts: 6 Karma: 1000 Join Date: Oct 2013 Device: Kindle 4	Hi! First of all, sorry about my english. So, I have a Kindle4, it was never flashed or anything, now the screen is frozen, i tried hard reseting but didnt worked. I tried it many times. Unfortunatly tha last time i was tried, it was connected via usb to my computer. After this if i trying turn on, or take a hard reset, the turning indicator LED dosnt show anything. When i connected the kindle to my computer via usb, then i see NS Blank CODEX in the control panel under devices. If try to charging with wall charger, doest work. When i plugged in, the LED is orange, but some hours later, a kindle turn off, and the LED goes off too. So i decide to try to fix it, i wana set the default. So i downloaded the Kubrick live cd, but the process is stopped when 'Putting device into Fastboot mode" it say "Waiting for device..." The kindle screen is frozen, how to press next? How to take a fastboot mode and how to restore my kindle? With the MfgTool.exe i can take it to the all mode,but that is all, i dont know how to restore it default. Thanks all for help. Thrillseeka

10-05-2013, 08:08 AM	#195
Thrillseeka Junior Member Posts: 6 Karma: 1000 Join Date: Oct 2013 Device: Kindle 4	I forgot to write, but i tried the Kubrick the real hardware, not from vmware etc. If i press alt+f2 then logon and write lsusb i see 6 device, the first is: Bus 001 Device 005: ID 15a2:0052 Freescale Semicoductor, Inc. The other 5 is Linux Foundation, Dell Computer, Logitech, Linux Foundation, Dell Computer How to set fastboot moda?