3.4 update coming out tonight... - Page 3

knc1 · 09-12-2012, 12:12 PM

@NiLuJe twobob mentioned to me that the 3.4 update does not like his custom kernel.
Can you imagine that? lab126 did not allow for users who have installed their own kernel?

NiLuJe · 09-12-2012, 12:14 PM

@knc1: (Nearly) every update has at least a patch to apply to the kernel, so they all do a checksum verification on the current kernel as a sanity check. That of course means it'll fail with a custom kernel

.

AZImmortal · 09-12-2012, 02:50 PM

For those of us with custom kernels installed, what would be the path to upgrading to 3.4? I'm currently at 3.3 with seaniko7's custom kernel.

knc1 · 09-12-2012, 02:53 PM

Quote:

Originally Posted by AZImmortal

For those of us with custom kernels installed, what would be the path to upgrading to 3.4? I'm currently at 3.3 with seaniko7's custom kernel.

Three choices:

Open the update, remove any kernel related changes, re-pack the update.

Remove the custom kernel from the machine.

Wait until someone builds a custom kernel with 3.4 system files.
(Or build it yourself and donate it here.)

AZImmortal · 09-12-2012, 03:24 PM

Hmm, I can't/don't know how to do options 1 or 3. How would I go about removing the custom kernel? Is there some kind of installer with the stock kernel?

geekmaster · 09-12-2012, 03:47 PM

Quote:

Originally Posted by knc1

Three choices:

Open the update, remove any kernel related changes, re-pack the update.

Remove the custom kernel from the machine.

Wait until someone builds a custom kernel with 3.4 system files.
(Or build it yourself and donate it here.)

Of your "three choices", I like #4 the best (build it yourself and donate).

NiLuJe · 09-12-2012, 03:52 PM

Note that #4 would still mean hacking a custom rebuilt 3.4 update, or flashing a full partition via ATK/k3flasher.

knc1 · 09-12-2012, 04:01 PM

Quote:

Originally Posted by NiLuJe

Note that #4 would still mean hacking a custom rebuilt 3.4 update, or flashing a full partition via ATK/k3flasher.

K3Flasher can "dump" the full contents of a 3.4 firmware image without a working jailbreak or password(s).

I sort-of expect the same to be true for the Kpw. Should know in a few weeks.

NiLuJe · 09-12-2012, 04:07 PM

Looking at the FW 3.x updates that do a *full* kernel flash (not a patch), like 3.3 / 3.4, the kernel checksums seems to be checked post-flash only, so, unless you installed custom *modules* too (those will have a pre-patch check), you should be good to go with a custom kernel. You'll just lose it during the update.

uwndrd · 09-13-2012, 12:54 AM

KF8! Hell yeah! But... I'm too lazy to reinstall all those hacks, maybe next time...

AZImmortal · 09-13-2012, 01:46 AM

Quote:

Originally Posted by uwndrd

KF8! Hell yeah! But... I'm too lazy to reinstall all those hacks, maybe next time...

NiLuJe mentioned earlier that it seems to leave the jailbreak intact, but I guess I haven't seen anyone who has actually confirmed this after updating. Does anyone have any comments regarding the preservation of the jailbreak and any hacks?

ganburigan · 09-13-2012, 02:47 AM

I set my K3 into Factory-Mode before updating. All hacks were gone.
Now the update works fine, but i can't jailbreak it (with the correct file) any more .....

diba · 09-13-2012, 03:19 AM

I updated from 3.3 to 3.4, jailbreak was still intact! I could install my german localization (which does not work properly on 3.4) which indicates clearly an installed jb.

twobob · 09-13-2012, 05:18 AM

Had no problems with the JB after completely clean install -> Upgrade -> JB.

(err other than I applied the wrong one once.... it's been a while, *when* I applied the **right one** worked fine...)

NiLuJe · 09-13-2012, 10:44 AM

Yup, all my stuff is update proof

.

On the other hand, doing a factory reset *without* uninstalling stuff before is *never* a good idea (unless you don't have any other choices), and may lead to head-scratching issues like ganburigan is experiencing... (That you'll have to fix by manually restoring the wiped parts of the hacks in the userstore: in the case on my stuff, pull the link* folders from the zip files and plop them in the userstore, then reboot).

09-12-2012, 04:07 PM	#39
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Looking at the FW 3.x updates that do a full kernel flash (not a patch), like 3.3 / 3.4, the kernel checksums seems to be checked post-flash only, so, unless you installed custom modules too (those will have a pre-patch check), you should be good to go with a custom kernel. You'll just lose it during the update. Last edited by NiLuJe; 09-12-2012 at 04:11 PM.

09-13-2012, 02:47 AM	#42
ganburigan Member Posts: 10 Karma: 8228 Join Date: Sep 2011 Device: Kindle DX, Kindle3KB	I set my K3 into Factory-Mode before updating. All hacks were gone. Now the update works fine, but i can't jailbreak it (with the correct file) any more ..... Last edited by ganburigan; 09-13-2012 at 10:09 AM.

09-13-2012, 05:18 AM	#44
twobob ( ͡° ͜ʖ ͡°){ʇlnɐɟ ƃǝs}Týr Posts: 6,586 Karma: 6299993 Join Date: Jun 2012 Location: uti gratia usura (Yao ying da ying; Mo ying da yieng) Device: PW-WIFI\|K5-3G+WIFI\| K4\|K3-3G\|DXG\|K2\| Rooted Nook Touch	Had no problems with the JB after completely clean install -> Upgrade -> JB. (err other than I applied the wrong one once.... it's been a while, when I applied the right one worked fine...) Last edited by twobob; 09-13-2012 at 05:19 AM. Reason: added my shame

09-13-2012, 10:44 AM	#45
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Yup, all my stuff is update proof . On the other hand, doing a factory reset without uninstalling stuff before is never a good idea (unless you don't have any other choices), and may lead to head-scratching issues like ganburigan is experiencing... (That you'll have to fix by manually restoring the wiped parts of the hacks in the userstore: in the case on my stuff, pull the link* folders from the zip files and plop them in the userstore, then reboot). Last edited by NiLuJe; 09-13-2012 at 10:56 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

09-12-2012, 12:12 PM	#31
knc1 Going Viral Posts: 17,212 Karma: 18210809 Join Date: Feb 2012 Location: Central Texas Device: No K1, PW2, KV, KOA	@NiLuJe twobob mentioned to me that the 3.4 update does not like his custom kernel. Can you imagine that? lab126 did not allow for users who have installed their own kernel?

09-12-2012, 12:14 PM	#32
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	@knc1: (Nearly) every update has at least a patch to apply to the kernel, so they all do a checksum verification on the current kernel as a sanity check. That of course means it'll fail with a custom kernel .

09-12-2012, 02:50 PM	#33
AZImmortal Zealot Posts: 135 Karma: 5555611 Join Date: Jul 2011 Device: Kindle Keyboard 3G, Nexus 7	For those of us with custom kernels installed, what would be the path to upgrading to 3.4? I'm currently at 3.3 with seaniko7's custom kernel.

09-12-2012, 03:24 PM	#35
AZImmortal Zealot Posts: 135 Karma: 5555611 Join Date: Jul 2011 Device: Kindle Keyboard 3G, Nexus 7	Hmm, I can't/don't know how to do options 1 or 3. How would I go about removing the custom kernel? Is there some kind of installer with the stock kernel?

09-12-2012, 03:52 PM	#37
NiLuJe BLAM! Posts: 13,506 Karma: 26047202 Join Date: Jun 2010 Location: Paris, France Device: Kindle 2i, 3g, 4, 5w, PW, PW2, PW5; Kobo H2O, Forma, Elipsa, Sage, C2E	Note that #4 would still mean hacking a custom rebuilt 3.4 update, or flashing a full partition via ATK/k3flasher.

09-13-2012, 12:54 AM	#40
uwndrd Member Posts: 16 Karma: 910 Join Date: Feb 2012 Device: K3, K4, PRS-650	KF8! Hell yeah! But... I'm too lazy to reinstall all those hacks, maybe next time...

09-13-2012, 03:19 AM	#43
diba Addict Posts: 396 Karma: 33660 Join Date: Jul 2011 Device: Kindle 3, Kindle 4, Kindle PW, Nexus7 3G	I updated from 3.3 to 3.4, jailbreak was still intact! I could install my german localization (which does not work properly on 3.4) which indicates clearly an installed jb.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Touch When is the next update coming?	08GibsonExplorer	Kobo Reader	2	08-18-2011 04:23 PM
Touch When is the FW update coming?	joshmosh	Kobo Reader	53	07-06-2011 10:46 PM
Classic 1.6 Update still coming down	apastuszak	Barnes & Noble NOOK	0	06-21-2011 12:21 AM
update 1.1 coming in January	waffleman	Nook Color & Nook Tablet	9	01-07-2011 08:04 AM
Update coming?	coolbreeze	Barnes & Noble NOOK	1	11-30-2010 06:39 PM